uGFX/ugfx
2
0
Fork 0
Code Issues 2 Pull Requests Projects Releases Wiki Activity

fixed Embest board

Browse Source
This commit is contained in:
Joel Bodenmann 2013-11-10 22:09:20 +01:00
parent 75a6dd8404
commit 6b1af0641c
4 changed files with 2 additions and 200 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

108
boards/addons/gdisp/board_SSD1289_firebullstm32f103.h
View File

@ -1,108 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file drivers/gdisp/SSD1289/board_SSD1289_firebullstm32f103.h
* @brief GDISP Graphic Driver subsystem board interface for the SSD1289 display.
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
// For a multiple display configuration we would put all this in a structure and then
// set g->board to that structure.
#define SET_CS palSetPad(GPIOD, 12);
#define CLR_CS palClearPad(GPIOD, 12);
#define SET_RS palSetPad(GPIOD, 13);
#define CLR_RS palClearPad(GPIOD, 13);
#define SET_WR palSetPad(GPIOD, 14);
#define CLR_WR palClearPad(GPIOD, 14);
#define SET_RD palSetPad(GPIOD, 15);
#define CLR_RD palClearPad(GPIOD, 15);
static inline void init_board(GDisplay *g) {
// As we are not using multiple displays we set g->board to NULL as we don't use it.
g->board = 0;
switch(g->controllerdisplay) {
case 0: // Set up for Display 0
palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOD, 12, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOD, 13, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOD, 14, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOD, 15, PAL_MODE_OUTPUT_PUSHPULL);
// Configure the pins to a well know state
SET_RS;
SET_RD;
SET_WR;
CLR_CS;
break;
}
}
static inline void post_init_board(GDisplay *g) {
(void) g;
}
static inline void setpin_reset(GDisplay *g, bool_t state) {
(void) g;
(void) state;
/* Nothing to do here - reset pin tied to Vcc */
}
static inline void set_backlight(GDisplay *g, uint8_t percent) {
(void) g;
(void) percent;
/* Nothing to do here - Backlight always on */
}
static inline void acquire_bus(GDisplay *g) {
(void) g;
}
static inline void release_bus(GDisplay *g) {
(void) g;
}
static inline void write_index(GDisplay *g, uint16_t index) {
(void) g;
palWritePort(GPIOE, index);
CLR_RS; CLR_WR; SET_WR; SET_RS;
}
static inline void write_data(GDisplay *g, uint16_t data) {
(void) g;
palWritePort(GPIOE, data);
CLR_WR; SET_WR;
}
static inline void setreadmode(GDisplay *g) {
(void) g;
// change pin mode to digital input
palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_INPUT);
CLR_RD;
}
static inline void setwritemode(GDisplay *g) {
(void) g;
// change pin mode back to digital output
SET_RD;
palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
}
static inline uint16_t read_data(GDisplay *g) {
return palReadPort(GPIOE);
}
#if defined(GDISP_USE_DMA)
#error "GDISP - SSD1289: The GPIO interface does not support DMA"
#endif
#endif /* _GDISP_LLD_BOARD_H */

90
boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_firebull_stm32f103.h
View File

@ -1,90 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_firebull_stm32f103.h
* @brief GINPUT ouch low level driver source for the ADS7843 on the FireBull STM32F103-FB board.
*
* @defgroup Mouse Mouse
* @ingroup GINPUT
* @{
*/
#ifndef _GINPUT_LLD_MOUSE_BOARD_H
#define _GINPUT_LLD_MOUSE_BOARD_H
static const SPIConfig spicfg = {
NULL,
GPIOC,
6,
/* SPI_CR1_BR_2 |*/ SPI_CR1_BR_1 | SPI_CR1_BR_0,
};
/**
* @brief Initialise the board for the touch.
*
* @notapi
*/
static inline void init_board(void) {
spiStart(&SPID1, &spicfg);
}
/**
* @brief Check whether the surface is currently touched
* @return TRUE if the surface is currently touched
*
* @notapi
*/
static inline bool_t getpin_pressed(void) {
return (!palReadPad(GPIOC, 4));
}
/**
* @brief Aquire the bus ready for readings
*
* @notapi
*/
static inline void aquire_bus(void) {
spiAcquireBus(&SPID1);
//TOUCHSCREEN_SPI_PROLOGUE();
palClearPad(GPIOC, 6);
}
/**
* @brief Release the bus after readings
*
* @notapi
*/
static inline void release_bus(void) {
palSetPad(GPIOC, 6);
spiReleaseBus(&SPID1);
//TOUCHSCREEN_SPI_EPILOGUE();
}
/**
* @brief Read a value from touch controller
* @return The value read from the controller
*
* params[in] port The controller port to read.
*
* @notapi
*/
static inline uint16_t read_value(uint16_t port) {
static uint8_t txbuf[3] = {0};
static uint8_t rxbuf[3] = {0};
uint16_t ret;
txbuf[0] = port;
spiExchange(&SPID1, 3, txbuf, rxbuf);
ret = (rxbuf[1] << 5) | (rxbuf[2] >> 3);
return ret;
}
#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
/** @} */

1
boards/base/Embest-STM32-DMSTF4BB/board.mk
View File

@ -2,6 +2,7 @@ GFXINC += $(GFXLIB)/boards/base/Embest-STM32-DMSTF4BB
GFXSRC +=
GFXDEFS += -DGFX_USE_CHIBIOS=TRUE
include $(GFXLIB)/boards/base/Embest-STM32-DMSTF4BB/chibios_board/board.mk
include $(GFXLIB)/drivers/gdisp/SSD2119/gdisp_lld.mk
include $(GFXLIB)/drivers/ginput/touch/STMPE811/ginput_lld.mk

3
boards/base/Embest-STM32-DMSTF4BB/readme.txt
View File

@ -2,6 +2,5 @@ This directory contains the interface for the Embest-STM32-DMSTF4BB board
running ChibiOS/RT.
As this is not a standard ChibiOS/RT supported board, the necessary board files have
also been provided in the ChibiOS_Board directory - include that board.mk in your
Makefile as well.
also been provided in the chibios_board directory