Browse Source

Removed TDISP module

remotes/origin_old/ugfx_release_2.6
Joel Bodenmann 8 years ago
parent
commit
891f134bc1
  1. 59
      boards/addons/tdisp/HD44780/tdisp_lld_board_olimex_e407.h
  2. 122
      boards/addons/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h
  3. 229
      demos/3rdparty/tdisp_f4_discovery/Makefile
  4. 33
      demos/3rdparty/tdisp_f4_discovery/README
  5. 523
      demos/3rdparty/tdisp_f4_discovery/chconf.h
  6. 147
      demos/3rdparty/tdisp_f4_discovery/gfxconf.h
  7. 330
      demos/3rdparty/tdisp_f4_discovery/halconf.h
  8. 109
      demos/3rdparty/tdisp_f4_discovery/main.c
  9. 257
      demos/3rdparty/tdisp_f4_discovery/mcuconf.h
  10. 169
      demos/3rdparty/tdisp_f4_discovery/tdisp_lld_board.h
  11. 43
      demos/modules/tdisp/gfxconf.h
  12. 67
      demos/modules/tdisp/main.c
  13. 245
      drivers/tdisp/HD44780/tdisp_lld.c
  14. 6
      drivers/tdisp/HD44780/tdisp_lld.mk
  15. 49
      drivers/tdisp/HD44780/tdisp_lld_board_example.h
  16. 2
      gfx.mk
  17. 7
      gfxconf.example.h
  18. 12
      include/gfx.h
  19. 3
      include/gfx_rules.h
  20. 42
      include/tdisp/lld/tdisp_lld.h
  21. 78
      include/tdisp/options.h
  22. 313
      include/tdisp/tdisp.h
  23. 1
      releases.txt
  24. 8
      src/gfx.c
  25. 119
      src/tdisp/tdisp.c
  26. 2
      src/tdisp/tdisp.mk

59
boards/addons/tdisp/HD44780/tdisp_lld_board_olimex_e407.h

@ -1,59 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file drivers/tdisp/HD44780/tdisp_lld_board_olimex_e407.h
* @brief TDISP driver subsystem board interface for the HD44780 display
*
* @addtogroup TDISP
* @{
*/
#ifndef _TDISP_LLD_BOARD_H
#define _TDISP_LLD_BOARD_H
/* Configure these to match the hardware connections on your board */
#define BUS_4BITS FALSE
#define PORT_DATA GPIOG
#define PORT_CTRL GPIOE
#define PIN_RS 0
#define PIN_RW 1
#define PIN_EN 2
static void init_board(void) {
palSetGroupMode(PORT_CTRL, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
palSetGroupMode(PORT_DATA, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
palClearPad(PORT_CTRL, PIN_RW);
}
static void writeToLCD(uint8_t data) {
palWritePort(PORT_DATA, data);
palSetPad(PORT_CTRL, PIN_EN);
gfxSleepMicroseconds(1);
palClearPad(PORT_CTRL, PIN_EN);
gfxSleepMicroseconds(5);
}
static void write_cmd(uint8_t data) {
palClearPad(PORT_CTRL, PIN_RS);
#if BUS_4BITS
writeToLCD(data>>4);
#endif
writeToLCD(data);
}
static void write_data(uint8_t data) {
palSetPad(PORT_CTRL, PIN_RS);
#if BUS_4BITS
writeToLCD(data>>4);
#endif
writeToLCD(data);
}
#endif /* _TDISP_LLD_BOARD_H */
/** @} */

122
boards/addons/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h

@ -1,122 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file drivers/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h
* @brief TDISP driver subsystem board interface for the HD44780 display
*
* @addtogroup TDISP
* @{
*/
#ifndef _TDISP_LLD_BOARD_H
#define _TDISP_LLD_BOARD_H
/* Configure these to match the hardware connections on your board */
#define BUS_4BITS TRUE
/* Configure the bitoffset in the dataport so they match with the
* hardware pins. An offset of 0 means bit0 stays at bit0 of the dataport.
* If the offset is set to 3, bit0 of the nibble will be positioned at
* P[A..G]3 of the hardware-port.
*/
#define hardware_offset 3
/* The port where the data is sent to. In the
* low-leveldriver het hardware_offset is taken
* into account. If for example the hardware_offset
* is set to 3, then de data will be sent to
* PE3, PE4, PE5 en PE6, if the dataport where GPIOE.
*/
#define PORT_DATA GPIOE
/* The port used to controle the controle lines of
* the display.
*/
#define PORT_CTRL GPIOD
/* Pin to controle the R/S-line of the display */
#define PIN_RS 0
/* Pin to controle the EN-line of the display */
#define PIN_EN 1
/* Pin to controle the R/W-pin of the display.
* If reading of the display is not used disable
* reading in the gfxconf.h and put a dummy value here
* as it will not be used.
*/
#define PIN_RW 7
static void init_board(void) {
/* Initialize the ports for data and controle-lines */
palSetGroupMode(PORT_CTRL, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
palSetGroupMode(PORT_DATA, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
/* Set alle controle pins to low */
palClearPad(PORT_CTRL, PIN_RS);
palClearPad(PORT_CTRL, PIN_EN);
#if TDISP_NEED_READ
palClearPad(PORT_CTRL, PIN_RW);
#endif
}
/* This is the low-level routine for sending the bits
* to the LCD-display. This routine shifts
* the bits so they match the hardware port.
*/
static void writeToLCD(uint8_t data) {
palWritePort(PORT_DATA, data<<hardware_offset);
palSetPad(PORT_CTRL, PIN_EN);
gfxSleepMicroseconds(1);
palClearPad(PORT_CTRL, PIN_EN);
/* wait a little while so that de display can process the data */
gfxSleepMicroseconds(5);
}
/* Writes a command to the display. The
* RS-line is pulled low and than the
* data is send.
*/
static void write_cmd(uint8_t data) {
palClearPad(PORT_CTRL, PIN_RS);
#if BUS_4BITS
/* first send the high-nibble */
writeToLCD(data>>4);
#endif
/* send the low-nibble */
#if BUS_4BITS
/* in 4-bit mode the high-nibble is zeroed out */
writeToLCD(data & 0x0F);
#else
writeToLCD(data);
#endif
}
// static void write_initcmd(uint8_t data) {
// write_cmd(data);
// }
/* Write data to the display. The
* RS-line is pulled high and than the
* data is send.
*/
static void write_data(uint8_t data) {
palSetPad(PORT_CTRL, PIN_RS);
#if BUS_4BITS
/* first send the high-nibble */
writeToLCD(data>>4);
#endif
/* send the low-nibble */
#if BUS_4BITS
/* in 4-bit mode the high-nibble is zeroed out */
writeToLCD(data & 0x0F);
#else
writeToLCD(data);
#endif
}
#endif /* _TDISP_LLD_BOARD_H */
/** @} */

229
demos/3rdparty/tdisp_f4_discovery/Makefile

@ -1,229 +0,0 @@
##############################################################################
# Build global options
# NOTE: Can be overridden externally.
#
# Compiler options here.
ifeq ($(USE_OPT),)
USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
ifeq ($(USE_COPT),)
USE_COPT =
endif
# C++ specific options here (added to USE_OPT).
ifeq ($(USE_CPPOPT),)
USE_CPPOPT = -fno-rtti
endif
# Enable this if you want the linker to remove unused code and data
ifeq ($(USE_LINK_GC),)
USE_LINK_GC = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
ifeq ($(USE_THUMB),)
USE_THUMB = yes
endif
# Enable this if you want to see the full log while compiling.
ifeq ($(USE_VERBOSE_COMPILE),)
USE_VERBOSE_COMPILE = no
endif
#
# Build global options
##############################################################################
##############################################################################
# Architecture or project specific options
#
# Enables the use of FPU on Cortex-M4.
# Enable this if you really want to use the STM FWLib.
ifeq ($(USE_FPU),)
USE_FPU = no
endif
# Enable this if you really want to use the STM FWLib.
ifeq ($(USE_FWLIB),)
USE_FWLIB = no
endif
#
# Architecture or project specific options
##############################################################################
##############################################################################
# Project, sources and paths
#
# Define project name here
PROJECT = ch
# Imported source files and paths
CHIBIOS = ../ChibiOS_2.5.1
GFXLIB = $(CHIBIOS)/ext/gfx
# GFXINC = $(CHIBIOS)/ext/gfx/include
include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk
include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk
include $(CHIBIOS)/os/hal/hal.mk
include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk
include $(CHIBIOS)/os/kernel/kernel.mk
include $(CHIBIOS)/test/test.mk
include $(GFXLIB)/gfx.mk
include $(GFXLIB)/drivers/tdisp/HD44780/tdisp_lld.mk
# Define linker script file here
LDSCRIPT= $(PORTLD)/STM32F407xG.ld
#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CSRC = $(PORTSRC) \
$(KERNSRC) \
$(TESTSRC) \
$(HALSRC) \
$(PLATFORMSRC) \
$(BOARDSRC) \
$(GFXSRC) \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CPPSRC =
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
ACSRC =
# C++ sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
ACPPSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
TCSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
TCPPSRC =
# List ASM source files here
ASMSRC = $(PORTASM)
INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
$(HALINC) $(PLATFORMINC) $(BOARDINC) \
$(GFXINC) \
$(CHIBIOS)/os/various/devices_lib/accel \
$(CHIBIOS)/os/various
#
# Project, sources and paths
##############################################################################
##############################################################################
# Compiler settings
#
MCU = cortex-m4
#TRGT = arm-elf-
TRGT = /opt/arm/bin/arm-none-eabi-
CC = $(TRGT)gcc
CPPC = $(TRGT)g++
# Enable loading with g++ only if you need C++ runtime support.
# NOTE: You can use C++ even without C++ support if you are careful. C++
# runtime support makes code size explode.
LD = $(TRGT)gcc
#LD = $(TRGT)g++
CP = $(TRGT)objcopy
AS = $(TRGT)gcc -x assembler-with-cpp
OD = $(TRGT)objdump
HEX = $(CP) -O ihex
BIN = $(CP) -O binary
# ARM-specific options here
AOPT =
# THUMB-specific options here
TOPT = -mthumb -DTHUMB
# Define C warning options here
CWARN = -Wall -Wextra -Wstrict-prototypes
# Define C++ warning options here
CPPWARN = -Wall -Wextra
#
# Compiler settings
##############################################################################
##############################################################################
# Start of default section
#
# List all default C defines here, like -D_DEBUG=1
DDEFS =
# List all default ASM defines here, like -D_DEBUG=1
DADEFS =
# List all default directories to look for include files here
DINCDIR =
# List the default directory to look for the libraries here
DLIBDIR =
# List all default libraries here
DLIBS =
#
# End of default section
##############################################################################
##############################################################################
# Start of user section
#
# List all user C define here, like -D_DEBUG=1
UDEFS =
# Define ASM defines here
UADEFS =
# List all user directories here
UINCDIR =
# List the user directory to look for the libraries here
ULIBDIR =
# List all user libraries here
ULIBS =
#
# End of user defines
##############################################################################
ifeq ($(USE_FPU),yes)
USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant
DDEFS += -DCORTEX_USE_FPU=TRUE
else
DDEFS += -DCORTEX_USE_FPU=FALSE
endif
ifeq ($(USE_FWLIB),yes)
include $(CHIBIOS)/ext/stm32lib/stm32lib.mk
CSRC += $(STM32SRC)
INCDIR += $(STM32INC)
USE_OPT += -DUSE_STDPERIPH_DRIVER
endif
include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk

33
demos/3rdparty/tdisp_f4_discovery/README

@ -1,33 +0,0 @@
Discription
===========
This is a demo project for testing the TDISP/HD44780
on a STM32F4-Discovery board.
The first line of the display will show: ChibiOS/GFX
The second line wil show: TDISP/HD44780 with a custom charactor in front.
If the connected display is a 4 line display:
The third line will stay empty
The forth line will show the cursor modes.
Display type
============
The demo is written for a 4 lines display. If have a display with less lines, change the TDISP_COLUMNS setting
gfxconf.h in the project directory to the count of your display.
The software will react upon this setting.
Hardware connection
===================
The datalines D4 to D7 of the HD44780 compatible display must be connected to the PE0 to PE3 output pins
of the Discovery board. The RS-line of the display must be connected to PD0 of the Discovery board
and the CS-line of the display must be connected to PD1 of the Discovery board.
The R/W-line of the display must be connected to ground, because reading from the display is not used.
The project directory contains a custom STM32F4 Discovery board file. If you want to change the connection to
the Discovery board, change the custom board file accordingly.
Building
========
You have to check the provided Makefile to meet your installation of the ARM-GCC Toolchain.

523
demos/3rdparty/tdisp_f4_discovery/chconf.h

@ -1,523 +0,0 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _CHCONF_H_
#define _CHCONF_H_
/*===========================================================================*/
/**
* @name Kernel parameters and options
* @{
*/
/*===========================================================================*/
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
#define CH_FREQUENCY 1000
#endif
/**
* @brief Round robin interval.
* @details This constant is the number of system ticks allowed for the
* threads before preemption occurs. Setting this value to zero
* disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
*
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
*/
#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
#define CH_TIME_QUANTUM 20
#endif
/**
* @brief Managed RAM size.
* @details Size of the RAM area to be managed by the OS. If set to zero
* then the whole available RAM is used. The core memory is made
* available to the heap allocator and/or can be used directly through
* the simplified core memory allocator.
*
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_USE_MEMCORE.
*/
#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
#define CH_MEMCORE_SIZE 0
#endif
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread automatically. The application has
* then the responsibility to do one of the following:
* - Spawn a custom idle thread at priority @p IDLEPRIO.
* - Change the main() thread priority to @p IDLEPRIO then enter
* an endless loop. In this scenario the @p main() thread acts as
* the idle thread.
* .
* @note Unless an idle thread is spawned the @p main() thread must not
* enter a sleep state.
*/
#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
#define CH_NO_IDLE_THREAD FALSE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Performance options
* @{
*/
/*===========================================================================*/
/**
* @brief OS optimization.
* @details If enabled then time efficient rather than space efficient code
* is used when two possible implementations exist.
*
* @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
#define CH_OPTIMIZE_SPEED TRUE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Subsystem options
* @{
*/
/*===========================================================================*/
/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
#define CH_USE_REGISTRY TRUE
#endif
/**
* @brief Threads synchronization APIs.
* @details If enabled then the @p chThdWait() function is included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
#define CH_USE_WAITEXIT TRUE
#endif
/**
* @brief Semaphores APIs.
* @details If enabled then the Semaphores APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
#define CH_USE_SEMAPHORES TRUE
#endif
/**
* @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special requirements.
* @note Requires @p CH_USE_SEMAPHORES.
*/
#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
#define CH_USE_SEMAPHORES_PRIORITY FALSE
#endif
/**
* @brief Atomic semaphore API.
* @details If enabled then the semaphores the @p chSemSignalWait() API
* is included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_SEMAPHORES.
*/
#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
#define CH_USE_SEMSW TRUE
#endif
/**
* @brief Mutexes APIs.
* @details If enabled then the mutexes APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
#define CH_USE_MUTEXES TRUE
#endif
/**
* @brief Conditional Variables APIs.
* @details If enabled then the conditional variables APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_MUTEXES.
*/
#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
#define CH_USE_CONDVARS TRUE
#endif
/**
* @brief Conditional Variables APIs with timeout.
* @details If enabled then the conditional variables APIs with timeout
* specification are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_CONDVARS.
*/
#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
#define CH_USE_CONDVARS_TIMEOUT TRUE
#endif
/**
* @brief Events Flags APIs.
* @details If enabled then the event flags APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
#define CH_USE_EVENTS TRUE
#endif
/**
* @brief Events Flags APIs with timeout.
* @details If enabled then the events APIs with timeout specification
* are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_EVENTS.
*/
#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
#define CH_USE_EVENTS_TIMEOUT TRUE
#endif
/**
* @brief Synchronous Messages APIs.
* @details If enabled then the synchronous messages APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
#define CH_USE_MESSAGES TRUE
#endif
/**
* @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in
* FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special requirements.
* @note Requires @p CH_USE_MESSAGES.
*/
#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
#define CH_USE_MESSAGES_PRIORITY FALSE
#endif
/**
* @brief Mailboxes APIs.
* @details If enabled then the asynchronous messages (mailboxes) APIs are
* included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_SEMAPHORES.
*/
#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
#define CH_USE_MAILBOXES TRUE
#endif
/**
* @brief I/O Queues APIs.
* @details If enabled then the I/O queues APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
#define CH_USE_QUEUES TRUE
#endif
/**
* @brief Core Memory Manager APIs.
* @details If enabled then the core memory manager APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
#define CH_USE_MEMCORE TRUE
#endif
/**
* @brief Heap Allocator APIs.
* @details If enabled then the memory heap allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
* @p CH_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
#define CH_USE_HEAP TRUE
#endif
/**
* @brief C-runtime allocator.
* @details If enabled the the heap allocator APIs just wrap the C-runtime
* @p malloc() and @p free() functions.
*
* @note The default is @p FALSE.
* @note Requires @p CH_USE_HEAP.
* @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
* appropriate documentation.
*/
#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
#define CH_USE_MALLOC_HEAP FALSE
#endif
/**
* @brief Memory Pools Allocator APIs.
* @details If enabled then the memory pools allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
#define CH_USE_MEMPOOLS TRUE
#endif
/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_WAITEXIT.
* @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
*/
#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
#define CH_USE_DYNAMIC TRUE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Debug options
* @{
*/
/*===========================================================================*/
/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
* at runtime.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
#endif
/**
* @brief Debug option, parameters checks.
* @details If enabled then the checks on the API functions input
* parameters are activated.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
#define CH_DBG_ENABLE_CHECKS FALSE
#endif
/**
* @brief Debug option, consistency checks.
* @details If enabled then all the assertions in the kernel code are
* activated. This includes consistency checks inside the kernel,
* runtime anomalies and port-defined checks.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
#define CH_DBG_ENABLE_ASSERTS FALSE
#endif
/**
* @brief Debug option, trace buffer.
* @details If enabled then the context switch circular trace buffer is
* activated.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
#define CH_DBG_ENABLE_TRACE FALSE
#endif
/**
* @brief Debug option, stack checks.
* @details If enabled then a runtime stack check is performed.
*
* @note The default is @p FALSE.
* @note The stack check is performed in a architecture/port dependent way.
* It may not be implemented or some ports.
* @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
#define CH_DBG_ENABLE_STACK_CHECK FALSE
#endif
/**
* @brief Debug option, stacks initialization.
* @details If enabled then the threads working area is filled with a byte
* value when a thread is created. This can be useful for the
* runtime measurement of the used stack.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
#define CH_DBG_FILL_THREADS FALSE
#endif
/**
* @brief Debug option, threads profiling.
* @details If enabled then a field is added to the @p Thread structure that
* counts the system ticks occurred while executing the thread.
*
* @note The default is @p TRUE.
* @note This debug option is defaulted to TRUE because it is required by
* some test cases into the test suite.
*/
#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
#define CH_DBG_THREADS_PROFILING TRUE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Kernel hooks
* @{
*/
/*===========================================================================*/
/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p Thread structure.
*/
#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
#define THREAD_EXT_FIELDS \
/* Add threads custom fields here.*/
#endif
/**
* @brief Threads initialization hook.
* @details User initialization code added to the @p chThdInit() API.
*
* @note It is invoked from within @p chThdInit() and implicitly from all
* the threads creation APIs.
*/
#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
#define THREAD_EXT_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
}
#endif
/**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
*
* @note It is inserted into lock zone.
* @note It is also invoked when the threads simply return in order to
* terminate.
*/
#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
#define THREAD_EXT_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
}
#endif
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* System halt code here.*/ \
}
#endif
/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
#define IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \
}
#endif
/**
* @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
#define SYSTEM_TICK_EVENT_HOOK() { \
/* System tick event code here.*/ \
}
#endif
/**
* @brief System halt hook.
* @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
#define SYSTEM_HALT_HOOK() { \
/* System halt code here.*/ \
}
#endif
/** @} */
/*===========================================================================*/
/* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
#endif /* _CHCONF_H_ */

147
demos/3rdparty/tdisp_f4_discovery/gfxconf.h

@ -1,147 +0,0 @@
/**
* This file has a different license to the rest of the GFX system.
* You can copy, modify and distribute this file as you see fit.
* You do not need to publish your source modifications to this file.
* The only thing you are not permitted to do is to relicense it
* under a different license.
*/
/**
* Copy this file into your project directory and rename it as gfxconf.h
* Edit your copy to turn on the GFX features you want to use.
*/
#ifndef _GFXCONF_H
#define _GFXCONF_H
/* The operating system to use. One of these must be defined - preferably in your Makefile */
//#define GFX_USE_OS_CHIBIOS FALSE
//#define GFX_USE_OS_WIN32 FALSE
//#define GFX_USE_OS_LINUX FALSE
//#define GFX_USE_OS_OSX FALSE
/* GFX subsystems to turn on */
#define GFX_USE_GDISP FALSE
#define GFX_USE_TDISP TRUE
#define GFX_USE_GWIN FALSE
#define GFX_USE_GEVENT FALSE
#define GFX_USE_GTIMER FALSE
#define GFX_USE_GINPUT FALSE
#define GFX_USE_GADC FALSE
#define GFX_USE_GAUDIN FALSE
#define GFX_USE_GAUDOUT FALSE
#define GFX_USE_GMISC FALSE
/* Features for the GDISP subsystem */
#define GDISP_NEED_VALIDATION TRUE
#define GDISP_NEED_CLIP TRUE
#define GDISP_NEED_TEXT TRUE
#define GDISP_NEED_CIRCLE TRUE
#define GDISP_NEED_ELLIPSE TRUE
#define GDISP_NEED_ARC FALSE
#define GDISP_NEED_CONVEX_POLYGON FALSE
#define GDISP_NEED_SCROLL FALSE
#define GDISP_NEED_PIXELREAD FALSE
#define GDISP_NEED_CONTROL FALSE
#define GDISP_NEED_QUERY FALSE
#define GDISP_NEED_IMAGE FALSE
#define GDISP_NEED_MULTITHREAD FALSE
#define GDISP_NEED_ASYNC FALSE
#define GDISP_NEED_MSGAPI FALSE
/* GDISP - builtin fonts */
#define GDISP_INCLUDE_FONT_SMALL FALSE
#define GDISP_INCLUDE_FONT_LARGER FALSE
#define GDISP_INCLUDE_FONT_UI1 FALSE
#define GDISP_INCLUDE_FONT_UI2 TRUE
#define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE
/* GDISP image decoders */
#define GDISP_NEED_IMAGE_NATIVE FALSE
#define GDISP_NEED_IMAGE_GIF FALSE
#define GDISP_NEED_IMAGE_BMP FALSE
#define GDISP_NEED_IMAGE_JPG FALSE
#define GDISP_NEED_IMAGE_PNG FALSE
/* Optional image support that can be turned off */
/*
#define GDISP_NEED_IMAGE_BMP_1 TRUE
#define GDISP_NEED_IMAGE_BMP_4 TRUE
#define GDISP_NEED_IMAGE_BMP_4_RLE TRUE
#define GDISP_NEED_IMAGE_BMP_8 TRUE
#define GDISP_NEED_IMAGE_BMP_8_RLE TRUE
#define GDISP_NEED_IMAGE_BMP_16 TRUE
#define GDISP_NEED_IMAGE_BMP_24 TRUE
#define GDISP_NEED_IMAGE_BMP_32 TRUE
*/
/* Features for the TDISP subsystem.
*/
/* Set this to TRUE if need a custom board file.
* The name of your board file must be "tdisp-lld-board.h" */
#define TDISP_USE_CUSTOM_BOARD TRUE
/* Set to TRUE if multi threads need to read or
* write to the display. If not, set this to FALSE */
#define TDISP_NEED_MULTITHREAD FALSE
/* If you use the busy flag or you want to read
* from the display, set this to TRUE otherwise
* leaf it to FALSE. Most users do not use the
* read function of the display */
#define TDISP_NEED_READ FALSE
/* Number of colums of the connected display */
#define TDISP_COLUMNS 20
/* Number of rows of the connect display */
#define TDISP_ROWS 4
/* Use dimming of backlight */
#define TDISP_USE_BACKLIGHT TRUE
/* Features for the GWIN subsystem. */
#define GWIN_NEED_BUTTON FALSE
#define GWIN_NEED_CONSOLE FALSE
#define GWIN_NEED_GRAPH FALSE
/* Features for the GEVENT subsystem. */
#define GEVENT_ASSERT_NO_RESOURCE FALSE
/* Features for the GTIMER subsystem. */
/* NONE */
/* Features for the GINPUT subsystem. */
#define GINPUT_NEED_MOUSE FALSE
#define GINPUT_NEED_KEYBOARD FALSE
#define GINPUT_NEED_TOGGLE FALSE
#define GINPUT_NEED_DIAL FALSE
/* Features for the GADC subsystem. */
/* NONE */
/* Features for the GAUDIN subsystem. */
/* NONE */
/* Features for the GAUDOUT subsystem. */
/* NONE */
/* Features for the GMISC subsystem. */
#define GMISC_NEED_ARRAYOPS FALSE
/* Optional Parameters for various subsystems */
/*
#define GDISP_MAX_FONT_HEIGHT 16
#define GEVENT_MAXIMUM_SIZE 32
#define GEVENT_MAX_SOURCE_LISTENERS 32
#define GTIMER_THREAD_WORKAREA_SIZE 512
#define GADC_MAX_LOWSPEED_DEVICES 4
#define GWIN_BUTTON_LAZY_RELEASE FALSE
*/
/* Optional Low Level Driver Definitions */
/*
#define GDISP_SCREEN_WIDTH 320
#define GDISP_SCREEN_HEIGHT 240
#define GDISP_USE_FSMC
#define GDISP_USE_GPIO
#define TDISP_COLUMNS 16
#define TDISP_ROWS 2
*/
#endif /* _GFXCONF_H */

330
demos/3rdparty/tdisp_f4_discovery/halconf.h

@ -1,330 +0,0 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _HALCONF_H_
#define _HALCONF_H_
#include "mcuconf.h"
/**
* @brief Enables the TM subsystem.
*/
#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
#define HAL_USE_TM FALSE
#endif
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC TRUE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the EXT subsystem.
*/
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM TRUE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB FALSE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB FALSE
#endif
/*===========================================================================*/
/* ADC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
#define ADC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* CAN driver related settings. */
/*===========================================================================*/
/**
* @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
#define CAN_USE_SLEEP_MODE TRUE
#endif
/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* MAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Block size for MMC transfers.
*/
#if !defined(MMC_SECTOR_SIZE) || defined(__DOXYGEN__)
#define MMC_SECTOR_SIZE 512
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
#define MMC_NICE_WAITING TRUE
#endif
/**
* @brief Number of positive insertion queries before generating the
* insertion event.
*/
#if !defined(MMC_POLLING_INTERVAL) || defined(__DOXYGEN__)
#define MMC_POLLING_INTERVAL 10
#endif
/**
* @brief Interval, in milliseconds, between insertion queries.
*/
#if !defined(MMC_POLLING_DELAY) || defined(__DOXYGEN__)
#define MMC_POLLING_DELAY 10
#endif
/**
* @brief Uses the SPI polled API for small data transfers.
* @details Polled transfers usually improve performance because it
* saves two context switches and interrupt servicing. Note
* that this option has no effect on large transfers which
* are always performed using DMAs/IRQs.
*/
#if !defined(MMC_USE_SPI_POLLING) || defined(__DOXYGEN__)
#define MMC_USE_SPI_POLLING TRUE
#endif
/*===========================================================================*/
/* SDC driver related settings. */
/*===========================================================================*/
/**
* @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intervals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
#define SDC_INIT_RETRY 100
#endif
/**
* @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept
* at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
#define SDC_MMC_SUPPORT FALSE
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
#define SDC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SERIAL driver related settings. */
/*===========================================================================*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
#define SPI_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define SPI_USE_MUTUAL_EXCLUSION TRUE
#endif
#endif /* _HALCONF_H_ */

109
demos/3rdparty/tdisp_f4_discovery/main.c

@ -1,109 +0,0 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "ch.h"
#include "hal.h"
#include "gfx.h"
int main(void) {
uint8_t charmap[8];
uint8_t n;
halInit();
chSysInit();
tdispInit();
/* reset cursor position and clear the screen */
tdispHome();
tdispClear();
/* draw a string to a given location */
tdispSetCursor(0, 0);
tdispDrawChar('C');
chThdSleepMilliseconds(500);
tdispDrawChar('h');
chThdSleepMilliseconds(500);
tdispDrawChar('i');
chThdSleepMilliseconds(500);
tdispDrawChar('b');
chThdSleepMilliseconds(500);
tdispDrawChar('i');
chThdSleepMilliseconds(500);
tdispDrawChar('O');
chThdSleepMilliseconds(500);
tdispDrawChar('S');
chThdSleepMilliseconds(500);
tdispDrawChar('/');
chThdSleepMilliseconds(500);
tdispDrawChar('G');
chThdSleepMilliseconds(500);
tdispDrawChar('F');
chThdSleepMilliseconds(500);
tdispDrawChar('X');
chThdSleepMilliseconds(500);
// After 2 seconds blank the screen and
// print tekst on the next line en
// enable the display again
chThdSleepMilliseconds(1000);
tdispDisplayMode(displayOff);
tdispSetCursor(1, 1);
tdispDrawString("TDISP/HD44780");
chThdSleepMilliseconds(1000);
tdispDisplayMode(displayOn);
/* create and display a custom made character after 1S*/
chThdSleepMilliseconds(1000);
charmap[0] = 0b00100;
charmap[1] = 0b01110;
charmap[2] = 0b01110;
charmap[3] = 0b01110;
charmap[4] = 0b11111;
charmap[5] = 0b00000;
charmap[6] = 0b00100;
charmap[7] = 0b00000;
tdispCreateChar(0, charmap);
tdispSetCursor(0, 1);
tdispDrawChar(0);
// after 1 second turn to 50%
chThdSleepMilliseconds(1000);
tdispSetBacklight(50);
while(TRUE) {
tdispSetCursor(0, 3);
tdispDrawString("Cursor OFF: ");
tdispSetCursorShape(cursorOff);
chThdSleepMilliseconds(5000);
tdispSetCursor(0, 3);
tdispDrawString("Cursor ON: ");
tdispSetCursorShape(cursorBlock);
chThdSleepMilliseconds(5000);
tdispSetCursor(0, 3);
tdispDrawString("Cursor BLINK: ");
tdispSetCursorShape(cursorBlinkingBlock);
chThdSleepMilliseconds(5000);
}
}

257
demos/3rdparty/tdisp_f4_discovery/mcuconf.h

@ -1,257 +0,0 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* STM32F4xx drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 15...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
#define STM32F4xx_MCUCONF
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_HSI_ENABLED TRUE
#define STM32_LSI_ENABLED TRUE
#define STM32_HSE_ENABLED TRUE
#define STM32_LSE_ENABLED FALSE
#define STM32_CLOCK48_REQUIRED TRUE
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSE
#define STM32_PLLM_VALUE 8
#define STM32_PLLN_VALUE 336
#define STM32_PLLP_VALUE 2
#define STM32_PLLQ_VALUE 7
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV4
#define STM32_PPRE2 STM32_PPRE2_DIV2
#define STM32_RTCSEL STM32_RTCSEL_LSI
#define STM32_RTCPRE_VALUE 8
#define STM32_MCO1SEL STM32_MCO1SEL_HSI
#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
#define STM32_I2SSRC STM32_I2SSRC_CKIN
#define STM32_PLLI2SN_VALUE 192
#define STM32_PLLI2SR_VALUE 5
#define STM32_VOS STM32_VOS_HIGH
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
/*
* ADC driver system settings.
*/
#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
#define STM32_ADC_USE_ADC1 TRUE
#define STM32_ADC_USE_ADC2 FALSE
#define STM32_ADC_USE_ADC3 FALSE
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
#define STM32_ADC_ADC1_DMA_PRIORITY 2