Removed TDISP module

ugfx_release_2.6
Joel Bodenmann 2013-12-11 14:50:09 +01:00
parent 5ea2cb9f8d
commit 891f134bc1
26 changed files with 4 additions and 2971 deletions

View File

@ -1,59 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file drivers/tdisp/HD44780/tdisp_lld_board_olimex_e407.h
* @brief TDISP driver subsystem board interface for the HD44780 display
*
* @addtogroup TDISP
* @{
*/
#ifndef _TDISP_LLD_BOARD_H
#define _TDISP_LLD_BOARD_H
/* Configure these to match the hardware connections on your board */
#define BUS_4BITS FALSE
#define PORT_DATA GPIOG
#define PORT_CTRL GPIOE
#define PIN_RS 0
#define PIN_RW 1
#define PIN_EN 2
static void init_board(void) {
palSetGroupMode(PORT_CTRL, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
palSetGroupMode(PORT_DATA, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
palClearPad(PORT_CTRL, PIN_RW);
}
static void writeToLCD(uint8_t data) {
palWritePort(PORT_DATA, data);
palSetPad(PORT_CTRL, PIN_EN);
gfxSleepMicroseconds(1);
palClearPad(PORT_CTRL, PIN_EN);
gfxSleepMicroseconds(5);
}
static void write_cmd(uint8_t data) {
palClearPad(PORT_CTRL, PIN_RS);
#if BUS_4BITS
writeToLCD(data>>4);
#endif
writeToLCD(data);
}
static void write_data(uint8_t data) {
palSetPad(PORT_CTRL, PIN_RS);
#if BUS_4BITS
writeToLCD(data>>4);
#endif
writeToLCD(data);
}
#endif /* _TDISP_LLD_BOARD_H */
/** @} */

View File

@ -1,122 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file drivers/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h
* @brief TDISP driver subsystem board interface for the HD44780 display
*
* @addtogroup TDISP
* @{
*/
#ifndef _TDISP_LLD_BOARD_H
#define _TDISP_LLD_BOARD_H
/* Configure these to match the hardware connections on your board */
#define BUS_4BITS TRUE
/* Configure the bitoffset in the dataport so they match with the
* hardware pins. An offset of 0 means bit0 stays at bit0 of the dataport.
* If the offset is set to 3, bit0 of the nibble will be positioned at
* P[A..G]3 of the hardware-port.
*/
#define hardware_offset 3
/* The port where the data is sent to. In the
* low-leveldriver het hardware_offset is taken
* into account. If for example the hardware_offset
* is set to 3, then de data will be sent to
* PE3, PE4, PE5 en PE6, if the dataport where GPIOE.
*/
#define PORT_DATA GPIOE
/* The port used to controle the controle lines of
* the display.
*/
#define PORT_CTRL GPIOD
/* Pin to controle the R/S-line of the display */
#define PIN_RS 0
/* Pin to controle the EN-line of the display */
#define PIN_EN 1
/* Pin to controle the R/W-pin of the display.
* If reading of the display is not used disable
* reading in the gfxconf.h and put a dummy value here
* as it will not be used.
*/
#define PIN_RW 7
static void init_board(void) {
/* Initialize the ports for data and controle-lines */
palSetGroupMode(PORT_CTRL, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
palSetGroupMode(PORT_DATA, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
/* Set alle controle pins to low */
palClearPad(PORT_CTRL, PIN_RS);
palClearPad(PORT_CTRL, PIN_EN);
#if TDISP_NEED_READ
palClearPad(PORT_CTRL, PIN_RW);
#endif
}
/* This is the low-level routine for sending the bits
* to the LCD-display. This routine shifts
* the bits so they match the hardware port.
*/
static void writeToLCD(uint8_t data) {
palWritePort(PORT_DATA, data<<hardware_offset);
palSetPad(PORT_CTRL, PIN_EN);
gfxSleepMicroseconds(1);
palClearPad(PORT_CTRL, PIN_EN);
/* wait a little while so that de display can process the data */
gfxSleepMicroseconds(5);
}
/* Writes a command to the display. The
* RS-line is pulled low and than the
* data is send.
*/
static void write_cmd(uint8_t data) {
palClearPad(PORT_CTRL, PIN_RS);
#if BUS_4BITS
/* first send the high-nibble */
writeToLCD(data>>4);
#endif
/* send the low-nibble */
#if BUS_4BITS
/* in 4-bit mode the high-nibble is zeroed out */
writeToLCD(data & 0x0F);
#else
writeToLCD(data);
#endif
}
// static void write_initcmd(uint8_t data) {
// write_cmd(data);
// }
/* Write data to the display. The
* RS-line is pulled high and than the
* data is send.
*/
static void write_data(uint8_t data) {
palSetPad(PORT_CTRL, PIN_RS);
#if BUS_4BITS
/* first send the high-nibble */
writeToLCD(data>>4);
#endif
/* send the low-nibble */
#if BUS_4BITS
/* in 4-bit mode the high-nibble is zeroed out */
writeToLCD(data & 0x0F);
#else
writeToLCD(data);
#endif
}
#endif /* _TDISP_LLD_BOARD_H */
/** @} */

View File

@ -1,229 +0,0 @@
##############################################################################
# Build global options
# NOTE: Can be overridden externally.
#
# Compiler options here.
ifeq ($(USE_OPT),)
USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
ifeq ($(USE_COPT),)
USE_COPT =
endif
# C++ specific options here (added to USE_OPT).
ifeq ($(USE_CPPOPT),)
USE_CPPOPT = -fno-rtti
endif
# Enable this if you want the linker to remove unused code and data
ifeq ($(USE_LINK_GC),)
USE_LINK_GC = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
ifeq ($(USE_THUMB),)
USE_THUMB = yes
endif
# Enable this if you want to see the full log while compiling.
ifeq ($(USE_VERBOSE_COMPILE),)
USE_VERBOSE_COMPILE = no
endif
#
# Build global options
##############################################################################
##############################################################################
# Architecture or project specific options
#
# Enables the use of FPU on Cortex-M4.
# Enable this if you really want to use the STM FWLib.
ifeq ($(USE_FPU),)
USE_FPU = no
endif
# Enable this if you really want to use the STM FWLib.
ifeq ($(USE_FWLIB),)
USE_FWLIB = no
endif
#
# Architecture or project specific options
##############################################################################
##############################################################################
# Project, sources and paths
#
# Define project name here
PROJECT = ch
# Imported source files and paths
CHIBIOS = ../ChibiOS_2.5.1
GFXLIB = $(CHIBIOS)/ext/gfx
# GFXINC = $(CHIBIOS)/ext/gfx/include
include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk
include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk
include $(CHIBIOS)/os/hal/hal.mk
include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk
include $(CHIBIOS)/os/kernel/kernel.mk
include $(CHIBIOS)/test/test.mk
include $(GFXLIB)/gfx.mk
include $(GFXLIB)/drivers/tdisp/HD44780/tdisp_lld.mk
# Define linker script file here
LDSCRIPT= $(PORTLD)/STM32F407xG.ld
#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CSRC = $(PORTSRC) \
$(KERNSRC) \
$(TESTSRC) \
$(HALSRC) \
$(PLATFORMSRC) \
$(BOARDSRC) \
$(GFXSRC) \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CPPSRC =
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
ACSRC =
# C++ sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
ACPPSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
TCSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
TCPPSRC =
# List ASM source files here
ASMSRC = $(PORTASM)
INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
$(HALINC) $(PLATFORMINC) $(BOARDINC) \
$(GFXINC) \
$(CHIBIOS)/os/various/devices_lib/accel \
$(CHIBIOS)/os/various
#
# Project, sources and paths
##############################################################################
##############################################################################
# Compiler settings
#
MCU = cortex-m4
#TRGT = arm-elf-
TRGT = /opt/arm/bin/arm-none-eabi-
CC = $(TRGT)gcc
CPPC = $(TRGT)g++
# Enable loading with g++ only if you need C++ runtime support.
# NOTE: You can use C++ even without C++ support if you are careful. C++
# runtime support makes code size explode.
LD = $(TRGT)gcc
#LD = $(TRGT)g++
CP = $(TRGT)objcopy
AS = $(TRGT)gcc -x assembler-with-cpp
OD = $(TRGT)objdump
HEX = $(CP) -O ihex
BIN = $(CP) -O binary
# ARM-specific options here
AOPT =
# THUMB-specific options here
TOPT = -mthumb -DTHUMB
# Define C warning options here
CWARN = -Wall -Wextra -Wstrict-prototypes
# Define C++ warning options here
CPPWARN = -Wall -Wextra
#
# Compiler settings
##############################################################################
##############################################################################
# Start of default section
#
# List all default C defines here, like -D_DEBUG=1
DDEFS =
# List all default ASM defines here, like -D_DEBUG=1
DADEFS =
# List all default directories to look for include files here
DINCDIR =
# List the default directory to look for the libraries here
DLIBDIR =
# List all default libraries here
DLIBS =
#
# End of default section
##############################################################################
##############################################################################
# Start of user section
#
# List all user C define here, like -D_DEBUG=1
UDEFS =
# Define ASM defines here
UADEFS =
# List all user directories here
UINCDIR =
# List the user directory to look for the libraries here
ULIBDIR =
# List all user libraries here
ULIBS =
#
# End of user defines
##############################################################################
ifeq ($(USE_FPU),yes)
USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant
DDEFS += -DCORTEX_USE_FPU=TRUE
else
DDEFS += -DCORTEX_USE_FPU=FALSE
endif
ifeq ($(USE_FWLIB),yes)
include $(CHIBIOS)/ext/stm32lib/stm32lib.mk
CSRC += $(STM32SRC)
INCDIR += $(STM32INC)
USE_OPT += -DUSE_STDPERIPH_DRIVER
endif
include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk

View File

@ -1,33 +0,0 @@
Discription
===========
This is a demo project for testing the TDISP/HD44780
on a STM32F4-Discovery board.
The first line of the display will show: ChibiOS/GFX
The second line wil show: TDISP/HD44780 with a custom charactor in front.
If the connected display is a 4 line display:
The third line will stay empty
The forth line will show the cursor modes.
Display type
============
The demo is written for a 4 lines display. If have a display with less lines, change the TDISP_COLUMNS setting
gfxconf.h in the project directory to the count of your display.
The software will react upon this setting.
Hardware connection
===================
The datalines D4 to D7 of the HD44780 compatible display must be connected to the PE0 to PE3 output pins
of the Discovery board. The RS-line of the display must be connected to PD0 of the Discovery board
and the CS-line of the display must be connected to PD1 of the Discovery board.
The R/W-line of the display must be connected to ground, because reading from the display is not used.
The project directory contains a custom STM32F4 Discovery board file. If you want to change the connection to
the Discovery board, change the custom board file accordingly.
Building
========
You have to check the provided Makefile to meet your installation of the ARM-GCC Toolchain.

View File

@ -1,523 +0,0 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _CHCONF_H_
#define _CHCONF_H_
/*===========================================================================*/
/**
* @name Kernel parameters and options
* @{
*/
/*===========================================================================*/
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
#define CH_FREQUENCY 1000
#endif
/**
* @brief Round robin interval.
* @details This constant is the number of system ticks allowed for the
* threads before preemption occurs. Setting this value to zero
* disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
*
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
*/
#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
#define CH_TIME_QUANTUM 20
#endif
/**
* @brief Managed RAM size.
* @details Size of the RAM area to be managed by the OS. If set to zero
* then the whole available RAM is used. The core memory is made
* available to the heap allocator and/or can be used directly through
* the simplified core memory allocator.
*
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_USE_MEMCORE.
*/
#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
#define CH_MEMCORE_SIZE 0
#endif
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread automatically. The application has
* then the responsibility to do one of the following:
* - Spawn a custom idle thread at priority @p IDLEPRIO.
* - Change the main() thread priority to @p IDLEPRIO then enter
* an endless loop. In this scenario the @p main() thread acts as
* the idle thread.
* .
* @note Unless an idle thread is spawned the @p main() thread must not
* enter a sleep state.
*/
#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
#define CH_NO_IDLE_THREAD FALSE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Performance options
* @{
*/
/*===========================================================================*/
/**
* @brief OS optimization.
* @details If enabled then time efficient rather than space efficient code
* is used when two possible implementations exist.
*
* @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
#define CH_OPTIMIZE_SPEED TRUE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Subsystem options
* @{
*/
/*===========================================================================*/
/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
#define CH_USE_REGISTRY TRUE
#endif
/**
* @brief Threads synchronization APIs.
* @details If enabled then the @p chThdWait() function is included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
#define CH_USE_WAITEXIT TRUE
#endif
/**
* @brief Semaphores APIs.
* @details If enabled then the Semaphores APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
#define CH_USE_SEMAPHORES TRUE
#endif
/**
* @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special requirements.
* @note Requires @p CH_USE_SEMAPHORES.
*/
#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
#define CH_USE_SEMAPHORES_PRIORITY FALSE
#endif
/**
* @brief Atomic semaphore API.
* @details If enabled then the semaphores the @p chSemSignalWait() API
* is included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_SEMAPHORES.
*/
#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
#define CH_USE_SEMSW TRUE
#endif
/**
* @brief Mutexes APIs.
* @details If enabled then the mutexes APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
#define CH_USE_MUTEXES TRUE
#endif
/**
* @brief Conditional Variables APIs.
* @details If enabled then the conditional variables APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_MUTEXES.
*/
#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
#define CH_USE_CONDVARS TRUE
#endif
/**
* @brief Conditional Variables APIs with timeout.
* @details If enabled then the conditional variables APIs with timeout
* specification are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_CONDVARS.
*/
#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
#define CH_USE_CONDVARS_TIMEOUT TRUE
#endif
/**
* @brief Events Flags APIs.
* @details If enabled then the event flags APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
#define CH_USE_EVENTS TRUE
#endif
/**
* @brief Events Flags APIs with timeout.
* @details If enabled then the events APIs with timeout specification
* are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_EVENTS.
*/
#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
#define CH_USE_EVENTS_TIMEOUT TRUE
#endif
/**
* @brief Synchronous Messages APIs.
* @details If enabled then the synchronous messages APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
#define CH_USE_MESSAGES TRUE
#endif
/**
* @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in
* FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special requirements.
* @note Requires @p CH_USE_MESSAGES.
*/
#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
#define CH_USE_MESSAGES_PRIORITY FALSE
#endif
/**
* @brief Mailboxes APIs.
* @details If enabled then the asynchronous messages (mailboxes) APIs are
* included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_SEMAPHORES.
*/
#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
#define CH_USE_MAILBOXES TRUE
#endif
/**
* @brief I/O Queues APIs.
* @details If enabled then the I/O queues APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
#define CH_USE_QUEUES TRUE
#endif
/**
* @brief Core Memory Manager APIs.
* @details If enabled then the core memory manager APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
#define CH_USE_MEMCORE TRUE
#endif
/**
* @brief Heap Allocator APIs.
* @details If enabled then the memory heap allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
* @p CH_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
#define CH_USE_HEAP TRUE
#endif
/**
* @brief C-runtime allocator.
* @details If enabled the the heap allocator APIs just wrap the C-runtime
* @p malloc() and @p free() functions.
*
* @note The default is @p FALSE.
* @note Requires @p CH_USE_HEAP.
* @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
* appropriate documentation.
*/
#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
#define CH_USE_MALLOC_HEAP FALSE
#endif
/**
* @brief Memory Pools Allocator APIs.
* @details If enabled then the memory pools allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
#define CH_USE_MEMPOOLS TRUE
#endif
/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_WAITEXIT.
* @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
*/
#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
#define CH_USE_DYNAMIC TRUE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Debug options
* @{
*/
/*===========================================================================*/
/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
* at runtime.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
#endif
/**
* @brief Debug option, parameters checks.
* @details If enabled then the checks on the API functions input
* parameters are activated.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
#define CH_DBG_ENABLE_CHECKS FALSE
#endif
/**
* @brief Debug option, consistency checks.
* @details If enabled then all the assertions in the kernel code are
* activated. This includes consistency checks inside the kernel,
* runtime anomalies and port-defined checks.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
#define CH_DBG_ENABLE_ASSERTS FALSE
#endif
/**
* @brief Debug option, trace buffer.
* @details If enabled then the context switch circular trace buffer is
* activated.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
#define CH_DBG_ENABLE_TRACE FALSE
#endif
/**
* @brief Debug option, stack checks.
* @details If enabled then a runtime stack check is performed.
*
* @note The default is @p FALSE.
* @note The stack check is performed in a architecture/port dependent way.
* It may not be implemented or some ports.
* @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
#define CH_DBG_ENABLE_STACK_CHECK FALSE
#endif
/**
* @brief Debug option, stacks initialization.
* @details If enabled then the threads working area is filled with a byte
* value when a thread is created. This can be useful for the
* runtime measurement of the used stack.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
#define CH_DBG_FILL_THREADS FALSE
#endif
/**
* @brief Debug option, threads profiling.
* @details If enabled then a field is added to the @p Thread structure that
* counts the system ticks occurred while executing the thread.
*
* @note The default is @p TRUE.
* @note This debug option is defaulted to TRUE because it is required by
* some test cases into the test suite.
*/
#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
#define CH_DBG_THREADS_PROFILING TRUE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Kernel hooks
* @{
*/
/*===========================================================================*/
/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p Thread structure.
*/
#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
#define THREAD_EXT_FIELDS \
/* Add threads custom fields here.*/
#endif
/**
* @brief Threads initialization hook.
* @details User initialization code added to the @p chThdInit() API.
*
* @note It is invoked from within @p chThdInit() and implicitly from all
* the threads creation APIs.
*/
#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
#define THREAD_EXT_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
}
#endif
/**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
*
* @note It is inserted into lock zone.
* @note It is also invoked when the threads simply return in order to
* terminate.
*/
#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
#define THREAD_EXT_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
}
#endif
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* System halt code here.*/ \
}
#endif
/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
#define IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \
}
#endif
/**
* @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
#define SYSTEM_TICK_EVENT_HOOK() { \
/* System tick event code here.*/ \
}
#endif
/**
* @brief System halt hook.
* @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
#define SYSTEM_HALT_HOOK() { \
/* System halt code here.*/ \
}
#endif
/** @} */
/*===========================================================================*/
/* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
#endif /* _CHCONF_H_ */

View File

@ -1,147 +0,0 @@
/**
* This file has a different license to the rest of the GFX system.
* You can copy, modify and distribute this file as you see fit.
* You do not need to publish your source modifications to this file.
* The only thing you are not permitted to do is to relicense it
* under a different license.
*/
/**
* Copy this file into your project directory and rename it as gfxconf.h
* Edit your copy to turn on the GFX features you want to use.
*/
#ifndef _GFXCONF_H
#define _GFXCONF_H
/* The operating system to use. One of these must be defined - preferably in your Makefile */
//#define GFX_USE_OS_CHIBIOS FALSE
//#define GFX_USE_OS_WIN32 FALSE
//#define GFX_USE_OS_LINUX FALSE
//#define GFX_USE_OS_OSX FALSE
/* GFX subsystems to turn on */
#define GFX_USE_GDISP FALSE
#define GFX_USE_TDISP TRUE
#define GFX_USE_GWIN FALSE
#define GFX_USE_GEVENT FALSE
#define GFX_USE_GTIMER FALSE
#define GFX_USE_GINPUT FALSE
#define GFX_USE_GADC FALSE
#define GFX_USE_GAUDIN FALSE
#define GFX_USE_GAUDOUT FALSE
#define GFX_USE_GMISC FALSE
/* Features for the GDISP subsystem */
#define GDISP_NEED_VALIDATION TRUE
#define GDISP_NEED_CLIP TRUE
#define GDISP_NEED_TEXT TRUE
#define GDISP_NEED_CIRCLE TRUE
#define GDISP_NEED_ELLIPSE TRUE
#define GDISP_NEED_ARC FALSE
#define GDISP_NEED_CONVEX_POLYGON FALSE
#define GDISP_NEED_SCROLL FALSE
#define GDISP_NEED_PIXELREAD FALSE
#define GDISP_NEED_CONTROL FALSE
#define GDISP_NEED_QUERY FALSE
#define GDISP_NEED_IMAGE FALSE
#define GDISP_NEED_MULTITHREAD FALSE
#define GDISP_NEED_ASYNC FALSE
#define GDISP_NEED_MSGAPI FALSE
/* GDISP - builtin fonts */
#define GDISP_INCLUDE_FONT_SMALL FALSE
#define GDISP_INCLUDE_FONT_LARGER FALSE
#define GDISP_INCLUDE_FONT_UI1 FALSE
#define GDISP_INCLUDE_FONT_UI2 TRUE
#define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE
/* GDISP image decoders */
#define GDISP_NEED_IMAGE_NATIVE FALSE
#define GDISP_NEED_IMAGE_GIF FALSE
#define GDISP_NEED_IMAGE_BMP FALSE
#define GDISP_NEED_IMAGE_JPG FALSE
#define GDISP_NEED_IMAGE_PNG FALSE
/* Optional image support that can be turned off */
/*
#define GDISP_NEED_IMAGE_BMP_1 TRUE
#define GDISP_NEED_IMAGE_BMP_4 TRUE
#define GDISP_NEED_IMAGE_BMP_4_RLE TRUE
#define GDISP_NEED_IMAGE_BMP_8 TRUE
#define GDISP_NEED_IMAGE_BMP_8_RLE TRUE
#define GDISP_NEED_IMAGE_BMP_16 TRUE
#define GDISP_NEED_IMAGE_BMP_24 TRUE
#define GDISP_NEED_IMAGE_BMP_32 TRUE
*/
/* Features for the TDISP subsystem.
*/
/* Set this to TRUE if need a custom board file.
* The name of your board file must be "tdisp-lld-board.h" */
#define TDISP_USE_CUSTOM_BOARD TRUE
/* Set to TRUE if multi threads need to read or
* write to the display. If not, set this to FALSE */
#define TDISP_NEED_MULTITHREAD FALSE
/* If you use the busy flag or you want to read
* from the display, set this to TRUE otherwise
* leaf it to FALSE. Most users do not use the
* read function of the display */
#define TDISP_NEED_READ FALSE
/* Number of colums of the connected display */
#define TDISP_COLUMNS 20
/* Number of rows of the connect display */
#define TDISP_ROWS 4
/* Use dimming of backlight */
#define TDISP_USE_BACKLIGHT TRUE
/* Features for the GWIN subsystem. */
#define GWIN_NEED_BUTTON FALSE
#define GWIN_NEED_CONSOLE FALSE
#define GWIN_NEED_GRAPH FALSE
/* Features for the GEVENT subsystem. */
#define GEVENT_ASSERT_NO_RESOURCE FALSE
/* Features for the GTIMER subsystem. */
/* NONE */
/* Features for the GINPUT subsystem. */
#define GINPUT_NEED_MOUSE FALSE
#define GINPUT_NEED_KEYBOARD FALSE
#define GINPUT_NEED_TOGGLE FALSE
#define GINPUT_NEED_DIAL FALSE
/* Features for the GADC subsystem. */
/* NONE */
/* Features for the GAUDIN subsystem. */
/* NONE */
/* Features for the GAUDOUT subsystem. */
/* NONE */
/* Features for the GMISC subsystem. */
#define GMISC_NEED_ARRAYOPS FALSE
/* Optional Parameters for various subsystems */
/*
#define GDISP_MAX_FONT_HEIGHT 16
#define GEVENT_MAXIMUM_SIZE 32
#define GEVENT_MAX_SOURCE_LISTENERS 32
#define GTIMER_THREAD_WORKAREA_SIZE 512
#define GADC_MAX_LOWSPEED_DEVICES 4
#define GWIN_BUTTON_LAZY_RELEASE FALSE
*/
/* Optional Low Level Driver Definitions */
/*
#define GDISP_SCREEN_WIDTH 320
#define GDISP_SCREEN_HEIGHT 240
#define GDISP_USE_FSMC
#define GDISP_USE_GPIO
#define TDISP_COLUMNS 16
#define TDISP_ROWS 2
*/
#endif /* _GFXCONF_H */

View File

@ -1,330 +0,0 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _HALCONF_H_
#define _HALCONF_H_
#include "mcuconf.h"
/**
* @brief Enables the TM subsystem.
*/
#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
#define HAL_USE_TM FALSE
#endif
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC TRUE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the EXT subsystem.
*/
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM TRUE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB FALSE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB FALSE
#endif
/*===========================================================================*/
/* ADC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
#define ADC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* CAN driver related settings. */
/*===========================================================================*/
/**
* @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
#define CAN_USE_SLEEP_MODE TRUE
#endif
/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* MAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Block size for MMC transfers.
*/
#if !defined(MMC_SECTOR_SIZE) || defined(__DOXYGEN__)
#define MMC_SECTOR_SIZE 512
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
#define MMC_NICE_WAITING TRUE
#endif
/**
* @brief Number of positive insertion queries before generating the
* insertion event.
*/
#if !defined(MMC_POLLING_INTERVAL) || defined(__DOXYGEN__)
#define MMC_POLLING_INTERVAL 10
#endif
/**
* @brief Interval, in milliseconds, between insertion queries.
*/
#if !defined(MMC_POLLING_DELAY) || defined(__DOXYGEN__)
#define MMC_POLLING_DELAY 10
#endif
/**
* @brief Uses the SPI polled API for small data transfers.
* @details Polled transfers usually improve performance because it
* saves two context switches and interrupt servicing. Note
* that this option has no effect on large transfers which
* are always performed using DMAs/IRQs.
*/
#if !defined(MMC_USE_SPI_POLLING) || defined(__DOXYGEN__)
#define MMC_USE_SPI_POLLING TRUE
#endif
/*===========================================================================*/
/* SDC driver related settings. */
/*===========================================================================*/
/**
* @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intervals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
#define SDC_INIT_RETRY 100
#endif
/**
* @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept
* at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
#define SDC_MMC_SUPPORT FALSE
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
#define SDC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SERIAL driver related settings. */
/*===========================================================================*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
#define SPI_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define SPI_USE_MUTUAL_EXCLUSION TRUE
#endif
#endif /* _HALCONF_H_ */

View File

@ -1,109 +0,0 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "ch.h"
#include "hal.h"
#include "gfx.h"
int main(void) {
uint8_t charmap[8];
uint8_t n;
halInit();
chSysInit();
tdispInit();
/* reset cursor position and clear the screen */
tdispHome();
tdispClear();
/* draw a string to a given location */
tdispSetCursor(0, 0);
tdispDrawChar('C');
chThdSleepMilliseconds(500);
tdispDrawChar('h');
chThdSleepMilliseconds(500);
tdispDrawChar('i');
chThdSleepMilliseconds(500);
tdispDrawChar('b');
chThdSleepMilliseconds(500);
tdispDrawChar('i');
chThdSleepMilliseconds(500);
tdispDrawChar('O');
chThdSleepMilliseconds(500);
tdispDrawChar('S');
chThdSleepMilliseconds(500);
tdispDrawChar('/');
chThdSleepMilliseconds(500);
tdispDrawChar('G');
chThdSleepMilliseconds(500);
tdispDrawChar('F');
chThdSleepMilliseconds(500);
tdispDrawChar('X');
chThdSleepMilliseconds(500);
// After 2 seconds blank the screen and
// print tekst on the next line en
// enable the display again
chThdSleepMilliseconds(1000);
tdispDisplayMode(displayOff);
tdispSetCursor(1, 1);
tdispDrawString("TDISP/HD44780");
chThdSleepMilliseconds(1000);
tdispDisplayMode(displayOn);
/* create and display a custom made character after 1S*/
chThdSleepMilliseconds(1000);
charmap[0] = 0b00100;
charmap[1] = 0b01110;
charmap[2] = 0b01110;
charmap[3] = 0b01110;
charmap[4] = 0b11111;
charmap[5] = 0b00000;
charmap[6] = 0b00100;
charmap[7] = 0b00000;
tdispCreateChar(0, charmap);
tdispSetCursor(0, 1);
tdispDrawChar(0);
// after 1 second turn to 50%
chThdSleepMilliseconds(1000);
tdispSetBacklight(50);
while(TRUE) {
tdispSetCursor(0, 3);
tdispDrawString("Cursor OFF: ");
tdispSetCursorShape(cursorOff);
chThdSleepMilliseconds(5000);
tdispSetCursor(0, 3);
tdispDrawString("Cursor ON: ");
tdispSetCursorShape(cursorBlock);
chThdSleepMilliseconds(5000);
tdispSetCursor(0, 3);
tdispDrawString("Cursor BLINK: ");
tdispSetCursorShape(cursorBlinkingBlock);
chThdSleepMilliseconds(5000);
}
}

View File

@ -1,257 +0,0 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* STM32F4xx drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 15...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
#define STM32F4xx_MCUCONF
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_HSI_ENABLED TRUE
#define STM32_LSI_ENABLED TRUE
#define STM32_HSE_ENABLED TRUE
#define STM32_LSE_ENABLED FALSE
#define STM32_CLOCK48_REQUIRED TRUE
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSE
#define STM32_PLLM_VALUE 8
#define STM32_PLLN_VALUE 336
#define STM32_PLLP_VALUE 2
#define STM32_PLLQ_VALUE 7
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV4
#define STM32_PPRE2 STM32_PPRE2_DIV2
#define STM32_RTCSEL STM32_RTCSEL_LSI
#define STM32_RTCPRE_VALUE 8
#define STM32_MCO1SEL STM32_MCO1SEL_HSI
#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
#define STM32_I2SSRC STM32_I2SSRC_CKIN
#define STM32_PLLI2SN_VALUE 192
#define STM32_PLLI2SR_VALUE 5
#define STM32_VOS STM32_VOS_HIGH
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
/*
* ADC driver system settings.
*/
#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
#define STM32_ADC_USE_ADC1 TRUE
#define STM32_ADC_USE_ADC2 FALSE
#define STM32_ADC_USE_ADC3 FALSE
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_ADC2_DMA_PRIORITY 2
#define STM32_ADC_ADC3_DMA_PRIORITY 2
#define STM32_ADC_IRQ_PRIORITY 6
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6
#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6
/*
* CAN driver system settings.
*/
#define STM32_CAN_USE_CAN1 FALSE
#define STM32_CAN_USE_CAN2 FALSE
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
#define STM32_CAN_CAN2_IRQ_PRIORITY 11
/*
* EXT driver system settings.
*/
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
#define STM32_EXT_EXTI17_IRQ_PRIORITY 15
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
#define STM32_EXT_EXTI21_IRQ_PRIORITY 15
#define STM32_EXT_EXTI22_IRQ_PRIORITY 15
/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM4 FALSE
#define STM32_GPT_USE_TIM5 FALSE
#define STM32_GPT_USE_TIM8 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
#define STM32_GPT_TIM5_IRQ_PRIORITY 7
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
/*
* I2C driver system settings.
*/
#define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_USE_I2C3 FALSE
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
#define STM32_I2C_I2C3_IRQ_PRIORITY 5
#define STM32_I2C_I2C1_DMA_PRIORITY 3
#define STM32_I2C_I2C2_DMA_PRIORITY 3
#define STM32_I2C_I2C3_DMA_PRIORITY 3
#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt()
#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt()
#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt()
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_USE_TIM4 FALSE
#define STM32_ICU_USE_TIM5 FALSE
#define STM32_ICU_USE_TIM8 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
#define STM32_ICU_TIM5_IRQ_PRIORITY 7
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
/*
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_USE_TIM4 TRUE
#define STM32_PWM_USE_TIM5 FALSE
#define STM32_PWM_USE_TIM8 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
#define STM32_PWM_TIM5_IRQ_PRIORITY 7
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
/*
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_USART3 FALSE
#define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE
#define STM32_SERIAL_USE_USART6 FALSE
#define STM32_SERIAL_USART1_PRIORITY 12
#define STM32_SERIAL_USART2_PRIORITY 12
#define STM32_SERIAL_USART3_PRIORITY 12
#define STM32_SERIAL_UART4_PRIORITY 12
#define STM32_SERIAL_UART5_PRIORITY 12
#define STM32_SERIAL_USART6_PRIORITY 12
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 TRUE
#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_USE_SPI3 FALSE
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI3_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt()
/*
* UART driver system settings.
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt()
/*
* USB driver system settings.
*/
#define STM32_USB_USE_OTG1 FALSE
#define STM32_USB_USE_OTG2 FALSE
#define STM32_USB_OTG1_IRQ_PRIORITY 14
#define STM32_USB_OTG2_IRQ_PRIORITY 14
#define STM32_USB_OTG1_RX_FIFO_SIZE 512
#define STM32_USB_OTG2_RX_FIFO_SIZE 1024
#define STM32_USB_OTG_THREAD_PRIO LOWPRIO
#define STM32_USB_OTG_THREAD_STACK_SIZE 128
#define STM32_USB_OTGFIFO_FILL_BASEPRI 0

View File

@ -1,169 +0,0 @@
/*
ChibiOS/GFX - Copyright (C) 2012, 2013
Joel Bodenmann aka Tectu <joel@unormal.org>
This file is part of ChibiOS/GFX.
ChibiOS/GFX is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/GFX is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file drivers/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h
* @brief TDISP driver subsystem board interface for the HD44780 display
*
* @addtogroup TDISP
* @{
*/
#ifndef _TDISP_LLD_BOARD_H
#define _TDISP_LLD_BOARD_H
/* Configure these to match the hardware connections on your board */
#define BUS_4BITS TRUE
/* Configure the bitoffset in the dataport so they match with the
* hardware pins. An offset of 0 means bit0 stays at bit0 of the dataport.
* If the offset is set to 3, bit0 of the nibble will be positioned at
* bit3 of the hardware-port.
*/
#define hardware_offset 0
/* The port where the data is sent to. In the
* low-leveldriver het hardware_offset is taken
* into account. If for example the hardware_offset
* is set to 3, then de data will be sent to
* PE3, PE4, PE5 en PE6, if the dataport where GPIOE.
*/
#define PORT_DATA GPIOE
/* The port used to controle the controle lines of
* the display.
*/
#define PORT_CTRL GPIOD
/* Pin to controle the R/S-line of the display */
#define PIN_RS 0
/* Pin to controle the EN-line of the display */
#define PIN_EN 1
/* Pin to controle the R/W-pin of the display.
* If reading of the display is not used disable
* reading in the gfxconf.h and put a dummy value here
* as it will not be used.
*/
#define PIN_RW 7
#if TDISP_USE_BACKLIGHT
/* PWM configuration structure. We use timer 4 channel 2 (orange LED on board). */
static const PWMConfig pwmcfg = {
1000000, /* 1 MHz PWM clock frequency. */
100, /* PWM period is 100 cycles. */
NULL,
{
{PWM_OUTPUT_ACTIVE_HIGH, NULL},
{PWM_OUTPUT_ACTIVE_HIGH, NULL},
{PWM_OUTPUT_ACTIVE_HIGH, NULL},
{PWM_OUTPUT_ACTIVE_HIGH, NULL}
},
0
};
#endif
/* Initializes the board.
* If you are using a specific setup, than copy the boardfile to your
* project directory and set in gfxconf.h that you are using a custom board file
* The next thing you have to do is to initialize the hardware port(s) you
* are using to communicate with the board.
*/
static void init_board(void) {
/* Initialize the ports for data and controle-lines */
palSetGroupMode(PORT_CTRL, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
palSetGroupMode(PORT_DATA, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
/* Set alle controle pins to low */
palClearPad(PORT_CTRL, PIN_RS);
palClearPad(PORT_CTRL, PIN_EN);
#if TDISP_NEED_READ
palClearPad(PORT_CTRL, PIN_RW);
#endif
#if TDISP_USE_BACKLIGHT
/* Display backlight control */
/* TIM4 is an alternate function 2 (AF2) */
pwmStart(&PWMD4, &pwmcfg);
palSetPadMode(GPIOD, 13, PAL_MODE_ALTERNATE(2));
pwmEnableChannel(&PWMD4, 1, 100);
#endif
}
/* This is the low-level routine for sending the bits
* to the LCD-display. This routine shifts
* the bits so they match the hardware port.
*/
static void writeToLCD(uint8_t data) {
palWritePort(PORT_DATA, data);
palSetPad(PORT_CTRL, PIN_EN);
chThdSleepMicroseconds(5);
// chThdSleepMilliseconds(10);
palClearPad(PORT_CTRL, PIN_EN);
chThdSleepMicroseconds(5);
// chThdSleepMilliseconds(10);
/* wait a little while so that de display can process the data */
}
/* Writes a command to the display. The
* RS-line is pulled low and than the
* data is send.
*/
static void write_cmd(uint8_t data) {
palClearPad(PORT_CTRL, PIN_RS);
#if BUS_4BITS
/* first send the high-nibble */
writeToLCD((data & 0xF0)>>4);
/* in 4-bit mode the high-nibble is zeroed out */
writeToLCD((data & 0x0F));
#else
writeToLCD(data);
#endif
}
// static void write_initcmd(uint8_t data) {
// write_cmd(data);
// }
/* Write data to the display. The
* RS-line is pulled high and than the
* data is send.
*/
static void write_data(uint8_t data) {
palSetPad(PORT_CTRL, PIN_RS);
#if BUS_4BITS
/* first send the high-nibble */
writeToLCD((data & 0xF0)>>4);
/* in 4-bit mode the high-nibble is zeroed out */
writeToLCD((data & 0x0F));
#else
writeToLCD(data);
#endif
}
#if TDISP_USE_BACKLIGHT
/* Sets the brightness of the backlight of the display, using
* the PWM channel */
static void set_backlight(uint16_t percentage) {
pwmEnableChannel(&PWMD4, 1, percentage);
}
#endif
#endif /* _TDISP_LLD_BOARD_H */
/** @} */

View File

@ -1,43 +0,0 @@
/*
* Copyright (c) 2012, 2013, Joel Bodenmann aka Tectu <joel@unormal.org>
* Copyright (c) 2012, 2013, Andrew Hannam aka inmarket
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of the <organization> nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _GFXCONF_H
#define _GFXCONF_H
/* The operating system to use. One of these must be defined - preferably in your Makefile */
//#define GFX_USE_OS_CHIBIOS FALSE
//#define GFX_USE_OS_WIN32 FALSE
//#define GFX_USE_OS_LINUX FALSE
//#define GFX_USE_OS_OSX FALSE
/* GFX sub-systems to turn on */
#define GFX_USE_TDISP TRUE
#endif /* _GFXCONF_H */

View File

@ -1,67 +0,0 @@
/*
* Copyright (c) 2012, 2013, Joel Bodenmann aka Tectu <joel@unormal.org>
* Copyright (c) 2012, 2013, Andrew Hannam aka inmarket
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of the <organization> nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "gfx.h"
int main(void) {
uint8_t charmap[8];
gfxInit();
/* set cursor position and draw single characters */
tdispSetCursor(4, 0);
tdispDrawChar('H');
tdispDrawChar('D');
tdispDrawChar('4');
tdispDrawChar('4');
tdispDrawChar('7');
tdispDrawChar('8');
tdispDrawChar('0');
/* draw a string to a given location */
tdispDrawStringLocation(0, 1, "chibios-gfx.com");
/* create and display a custom made character */
charmap[0] = 0b00000;
charmap[1] = 0b00100;
charmap[2] = 0b00010;
charmap[3] = 0b11111;
charmap[4] = 0b00010;
charmap[5] = 0b00100;
charmap[6] = 0b00000;
charmap[7] = 0b00000;
tdispCreateChar(0, charmap);
tdispHome();
tdispDrawChar(0);
while(TRUE) {
gfxSleepMilliseconds(250);
}
}

View File

@ -1,245 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file drivers/tdisp/HD44780/tdisp_lld.c
* @brief TDISP driver subsystem low level driver source for the HD44780 display
*
* @addtogroup TDISP
* @{
*/
#include "gfx.h"
#if GFX_USE_TDISP /*|| defined(__DOXYGEN__)*/
#include "tdisp_lld_board.h"
/* Controller Specific Properties */
#define CUSTOM_CHAR_COUNT 8
#define CUSTOM_CHAR_XBITS 5
#define CUSTOM_CHAR_YBITS 8
/* Define the properties of our controller */
tdispStruct TDISP = {
TDISP_COLUMNS, TDISP_ROWS, /* cols, rows */
CUSTOM_CHAR_XBITS, CUSTOM_CHAR_YBITS, /* charBitsX, charBitsY */
CUSTOM_CHAR_COUNT /* maxCustomChars */
};
/* display control settings */
#define TDISP_DISPLAY_ON 0x04
#define TDISP_CURSOR_ON 0x02
#define TDISP_CURSOR_BLINK 0x01
/* cursor movement settings */
#define TDISP_SHIFT_ON 0x01
#define TDISP_CURSOR_INC 0x02
/* display scroll settings */
#define TDISP_SCROLL_DISPLAY 0x08
#define TDISP_SCROLL_RIGHT 0x04
static uint8_t displaycontrol;
static uint8_t cursorcontrol;
bool_t tdisp_lld_init(void) {
/* initialise hardware */
init_board();
/* The first part is the initialing code.
* In this part only the lower nibble of the
* byte is written directly to the display, thus
* without write_cmd, which sends both high and
* low nibble.
*/
/* Give the LCD a little time to wake up */
gfxSleepMilliseconds(15);
/* clear the RS-line to the display */
palClearPad(PORT_CTRL, PIN_RS);
// #if BUS_4BITS
/* write three times 0x03 to display (4-bit mode only)
* with RS = low.
*/
writeToLCD(0x03); // 1x
gfxSleepMilliseconds(20);
writeToLCD(0x03); // 2x
// gfxSleepMilliseconds(20);
writeToLCD(0x03); // 3x
// gfxSleepMilliseconds(20);
/* Put display in 4-bit mode by
* write 0x02 to display.
*/
writeToLCD(0x02); // 4bit-modus
// gfxSleepMilliseconds(20);
// #else
/* write three times 0x30 to display (8-bit mode only)
* with RS = low.
*/
// writeToLCD(0x30); // 1x
// writeToLCD(0x30); // 2x
// writeToLCD(0x30); // 3x
// #endif
/* From this point on, the LCD accepts
* bytes sent with highnibbel first and than
*the lownibble if working in 4-bit mode.
* In 8-bit mode bytes are written in 1 action.
*/
/* 4-bit modus, 2 lines en 5x7 characters */
write_cmd(0x28);
// gfxSleepMilliseconds(20);
/* set display on, cursor off and no blinking */
write_cmd(0x0C);
// gfxSleepMilliseconds(20);
/* set cursor increase and direction */
write_cmd(0x06);
// gfxSleepMilliseconds(20);
displaycontrol = TDISP_DISPLAY_ON;
cursorcontrol = TDISP_CURSOR_INC;
/* END OF INITIALISATION */
return TRUE;
}
/* Clears the display. The display needs
* a long time to process this command. So
* an extra delay is insterted.
*/
void tdisp_lld_clear(void) {
write_cmd(0x01);
}
/* Writes a character to the display */
void tdisp_lld_draw_char(char c) {
write_data(c);
}
/* Set cursor position */
void tdisp_lld_set_cursor(coord_t col, coord_t row) {
static const uint8_t row_offsets[] = { 0x00, 0x40, 0x14, 0x54 };
/*
* Short-cut:
*
* If x and y = 0 then use the home command.
*
* Note: There is probably no advantage as both commands are a single byte
*/
// if (col == 0 && row == 0) {
// write_cmd(0x02);
// return;
// }
write_cmd(0x80 | (col + row_offsets[row]));
// write_cmd(0x80 | (0x40 + col));
}
/* Create a custom character to the display */
void tdisp_lld_create_char(uint8_t address, uint8_t *charmap) {
int i;
write_cmd(0x40 | (address << 3));
for(i = 0; i < CUSTOM_CHAR_YBITS; i++) {
write_data(charmap[i]);
}
}
/* Write display control commands to the display */
void tdisp_lld_control(uint16_t what, uint16_t value) {
switch(what) {
case TDISP_CTRL_DISPLAY:
switch (value) {
case displayOff:
displaycontrol &= ~TDISP_DISPLAY_ON;
break;
case displayOn:
displaycontrol |= TDISP_DISPLAY_ON;
break;
}
write_cmd(0x08 | displaycontrol);
break;
case TDISP_CTRL_CURSOR:
switch (value) {
case cursorBlinkingBlock:
case cursorBlinkingUnderline:
case cursorBlinkingBar:
displaycontrol |= TDISP_CURSOR_ON + TDISP_CURSOR_BLINK;
break;
case cursorBlock:
case cursorUnderline:
case cursorBar:
displaycontrol = (displaycontrol | TDISP_CURSOR_ON) & ~TDISP_CURSOR_BLINK;
break;
case cursorOff:
default:
displaycontrol &= ~(TDISP_CURSOR_ON | TDISP_CURSOR_BLINK); // zet alleen de cursor uit. Bewaar de overige instellingen
break;
}
write_cmd(0x08 | displaycontrol);
break;
case TDISP_CTRL_MOVE:
switch (value) {
case cursorIncrease:
cursorcontrol |= TDISP_CURSOR_INC; // increase cursor position
break;
case cursorDecrease:
cursorcontrol &= ~TDISP_CURSOR_INC; // decrease cursor position
break;
}
write_cmd(0x04 | cursorcontrol);
break;
case TDISP_CTRL_SHIFT:
switch (value) {
case shiftOn:
cursorcontrol |= TDISP_SHIFT_ON;
break;
case shiftOff:
cursorcontrol &= ~TDISP_SHIFT_ON;
break;
}
write_cmd(0x04 | cursorcontrol);
break;
}
}
/* Scrolls the display in a particular direction with an amount of characters and delays the scroll between each scroll step */
void tdisp_lld_scroll(uint16_t direction, uint16_t amount, uint16_t delay) {
uint16_t scrollcontrol = 0;
uint16_t i;
switch (direction) {
case displayScrollLeft:
scrollcontrol = TDISP_SCROLL_DISPLAY;
break;
case displayScrollRight:
scrollcontrol = TDISP_SCROLL_DISPLAY | TDISP_SCROLL_RIGHT;
break;
}
for(i = 0; i < amount; i++) {
write_cmd(0x10 | scrollcontrol);
gfxSleepMilliseconds(delay);
}
}
#if TDISP_USE_BACKLIGHT
/* sets the brightness of the display backlight */
void tdisp_lld_set_backlight(uint16_t percentage) {
set_backlight(percentage);
}
#endif
#endif /* GFX_USE_TDISP */
/** @} */

View File

@ -1,6 +0,0 @@
# List the required driver.
GFXSRC += $(GFXLIB)/drivers/tdisp/HD44780/tdisp_lld.c
# Required include directories
GFXINC += $(GFXLIB)/drivers/tdisp/HD44780

View File

@ -1,49 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file drivers/tdisp/HD44780/tdisp_lld_board_example.h
* @brief TDISP driver subsystem board interface for the HD44780 display
*
* @addtogroup TDISP
* @{
*/
#ifndef _TDISP_LLD_BOARD_H
#define _TDISP_LLD_BOARD_H
/**
* The board may override the default display size.
* Uncomment the below if your board needs a non-standard size.
*/
/*
#ifndef TDISP_COLUMNS
#define TDISP_COLUMNS 16
#endif
#ifndef TDISP_ROWS
#define TDISP_ROWS 2
#endif
*/
static void init_board(void) {
/* Code here */
#error "tdispHD44780: You must supply a definition for init_board for your board"
}
static void write_cmd(uint8_t data) {
/* Code here */
#error "tdispHD44780: You must supply a definition for write_cmd for your board"
}
static void write_data(uint8_t data) {
/* Code here */
#error "tdispHD44780: You must supply a definition for write_data for your board"
}
#endif /* _TDISP_LLD_BOARD_H */
/** @} */

2
gfx.mk
View File

@ -4,7 +4,6 @@ GFXSRC += $(GFXLIB)/src/gfx.c
include $(GFXLIB)/src/gos/gos.mk
include $(GFXLIB)/src/gqueue/gqueue.mk
include $(GFXLIB)/src/gdisp/gdisp.mk
include $(GFXLIB)/src/tdisp/tdisp.mk
include $(GFXLIB)/src/gevent/gevent.mk
include $(GFXLIB)/src/gtimer/gtimer.mk
include $(GFXLIB)/src/gwin/gwin.mk
@ -13,3 +12,4 @@ include $(GFXLIB)/src/gadc/gadc.mk
include $(GFXLIB)/src/gaudin/gaudin.mk
include $(GFXLIB)/src/gaudout/gaudout.mk
include $(GFXLIB)/src/gmisc/gmisc.mk

View File

@ -22,7 +22,6 @@
/* GFX subsystems to turn on */
#define GFX_USE_GDISP FALSE
#define GFX_USE_TDISP FALSE
#define GFX_USE_GWIN FALSE
#define GFX_USE_GEVENT FALSE
#define GFX_USE_GTIMER FALSE
@ -96,9 +95,6 @@
#define GDISP_NEED_IMAGE_BMP_32 TRUE
*/
/* Features for the TDISP subsystem. */
#define TDISP_NEED_MULTITHREAD FALSE
/* Features for the GWIN subsystem. */
#define GWIN_NEED_WINDOWMANAGER FALSE
#define GWIN_NEED_CONSOLE FALSE
@ -196,8 +192,7 @@
#define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE
#define GDISP_GFXNET_UNSAFE_SOCKETS FALSE
#define GDISP_USE_DMA FALSE
#define TDISP_COLUMNS 16
#define TDISP_ROWS 2
*/
#endif /* _GFXCONF_H */

View File

@ -67,15 +67,6 @@
#ifndef GFX_USE_GDISP
#define GFX_USE_GDISP FALSE
#endif
/**
* @brief GFX Text Display Basic API
* @details Defaults to FALSE
* @note Also add the specific hardware driver to your makefile.
* Eg. include $(GFXLIB)/drivers/tdisp/HD44780/tdisp_lld.mk
*/
#ifndef GFX_USE_TDISP
#define GFX_USE_TDISP FALSE
#endif
/**
* @brief GFX Graphics Windowing API
* @details Defaults to FALSE
@ -173,7 +164,6 @@
#include "gdisp/options.h"
#include "gwin/options.h"
#include "ginput/options.h"
#include "tdisp/options.h"
#include "gadc/options.h"
#include "gaudin/options.h"
#include "gaudout/options.h"
@ -195,7 +185,6 @@
#include "gdisp/gdisp.h"
#include "gwin/gwin.h"
#include "ginput/ginput.h"
#include "tdisp/tdisp.h"
#include "gadc/gadc.h"
#include "gaudin/gaudin.h"
#include "gaudout/gaudout.h"
@ -224,3 +213,4 @@ extern "C" {
#endif /* _GFX_H */
/** @} */

View File

@ -188,9 +188,6 @@
#endif
#endif
#if GFX_USE_TDISP
#endif
#if GFX_USE_GAUDIN
#if GFX_USE_GEVENT && !GFX_USE_GTIMER
#if GFX_DISPLAY_RULE_WARNINGS

View File

@ -1,42 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file include/tdisp/lld/tdisp_lld.h
* @brief TDISP driver subsystem low level driver header.
*
* @addtogroup TDISP
* @{
*/
#ifndef _TDISP_LLD_H
#define _TDISP_LLD_H
#if GFX_USE_TDISP || defined(__DOXYGEN__)
#ifdef __cplusplus
extern "C" {
#endif
bool_t tdisp_lld_init(void);
void tdisp_lld_clear(void);
void tdisp_lld_draw_char(char c);
void tdisp_lld_set_cursor(coord_t col, coord_t row);
void tdisp_lld_create_char(uint8_t address, uint8_t *charmap);
void tdisp_lld_control(uint16_t what, uint16_t value);
void tdisp_lld_scroll(uint16_t direction, uint16_t amount, uint16_t delay);
void tdisp_lld_set_backlight(uint16_t percentage);
#ifdef __cplusplus
}
#endif
#endif /* GFX_USE_TDISP */
#endif /* _TDISP_LLD_H */
/** @} */

View File

@ -1,78 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file include/tdisp/options.h
* @brief TDISP sub-system options header file.
*
* @addtogroup TDISP
* @{
*/
#ifndef _TDISP_OPTIONS_H
#define _TDISP_OPTIONS_H
#if GFX_USE_TDISP
/**
* @name TDISP Functionality to be included
* @{
*/
/**
* @brief Set if the display need reading from the display
* @details Defaults to FALSE
* @details If TRUE, the read function of the display wil be implemented into the source.
* @note Most users do not need reading from the display.
*/
#ifndef TDISP_NEED_READ
#define TDISP_NEED_READ FALSE
#endif
/**
* @}
*
* @name TDISP Multi-Threading Options
* @{
*/
/**
* @brief Do the display functions need to be thread-safe.
* @details Defaults to FALSE
*/
#ifndef TDISP_NEED_MULTITHREAD
#define TDISP_NEED_MULTITHREAD FALSE
#endif
/**
* @}
*
* @name TDISP Optional Low Level Driver Defines
* @{
*/
/**
* @brief Use a custom board definition even if a board definition exists.
* @details Defaults to FALSE
* @details If TRUE, add tdisp_lld_board.h to your project directory and customise it.
* @note Not all TDISP low level drivers currently use board definition files.
*/
#ifndef TDISP_USE_CUSTOM_BOARD
#define TDISP_USE_CUSTOM_BOARD FALSE
#endif
/**
* @brief Set the screen height and width.
* @note Ignored by some low level GDISP drivers, optional for others.
* @note Where these values are allowed, a default is always provided by the low level driver.
*/
#ifndef TDISP_COLUMNS
#define TDISP_COLUMNS 16
#endif
#ifndef TDISP_ROWS
#define TDISP_ROWS 2
#endif
/** @} */
#endif /* GFX_USE_TDISP */
#endif /* _TDISP_OPTIONS_H */
/** @} */

View File

@ -1,313 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file include/tdisp/tdisp.h
* @brief TDISP Graphic Driver subsystem header file.
*
* @addtogroup TDISP
*
* @brief Module to drive character / dot matrix based displays
*
* @details The TDISP module provides high level abstraction to interface pixel oriented graphic displays.
* Due the TDISP module is completely encapsulated from the other modules, it's very fast and lightweight.
*
* @pre GFX_USE_TDISP must be set to TRUE in gfxconf.h
*
* @{
*/
#ifndef _TDISP_H
#define _TDISP_H
#include "gfx.h"
#if GFX_USE_TDISP || defined(__DOXYGEN__)
/**
* @brief TDISP cursor shape definitions
*/
typedef enum cursorshape_e {
cursorOff,
cursorBlock,
cursorBlinkingBlock,
cursorUnderline,
cursorBlinkingUnderline,
cursorBar,
cursorBlinkingBar
} cursorshape;
/**
* @brief TDISP display mode
*
* @details Display on of off definitions
*/
typedef enum displaymode_e {
displayOff,
displayOn
} displaymode;
/**
* @brief TDISP cursor movement
*
* @details Definitions for increasing or decreasing the cursor position after writing a character to
* the display.
*/
typedef enum movemode_e {
cursorIncrease,
cursorDecrease
} movemode;
/**
* @brief TDISP cursor shift mode
*
* @details Definitions if the contents of the whole display shifts when writing a character to the display.
* The cursor stays at the same position.
*/
typedef enum cursorshiftmode_e {
shiftOn,
shiftOff
} shiftmode;
/**
* @brief TDISP display scroll mode
*
* @details Definitions for scrolling the whole contents of the display to the right or left.
* @note Do not use this defintions with @p tdispControl, use the tdispScroll() function. That high-level
* function is easier to use, and the scrollspeed can be defined.
*/
typedef enum displayscrollmode_e {
displayScrollRight,
displayScrollLeft
} displayscrollmode;
/**
* @name TDISP control values
* @note The low level driver may define extra control values
* @{
*/
#define TDISP_CTRL_DISPLAY 0x0000
#define TDISP_CTRL_CURSOR 0x0001
#define TDISP_CTRL_MOVE 0x0002
#define TDISP_CTRL_SHIFT 0x0003
// #define TDISP_CTRL_SCROLL 0x0004
/** @} */
/**
* @brief The TDISP structure definition
*
* @details This structure contains the physical dimensions of the display, the
* dimensions of a character in pixels and the maximum number of
* custom characters that can be written to the display.
*/
typedef struct tdispStruct_t {
coord_t columns, rows;
coord_t charBitsX, charBitsY;
uint16_t maxCustomChars;
} tdispStruct;
/**
* @brief The TDISP structure
*/
extern tdispStruct TDISP;
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief TDISP driver initialisation
* @note This function is not implicitly invoked by @p halInit().
* It must be called manually.
*
* @return TRUE if success, FALSE otherwise
*
* @init
*/
bool_t tdispInit(void);
/**
* @brief Clears the display
*
* @details The display gets cleared and the cursor is set in the home position ( 0, 0 )
*/
void tdispClear(void);
/**
* @brief Sets the cursor to it's home position ( 0, 0 )
*/
void tdispHome(void);
/**
* @brief Set cursor to a specified position
*
* @param[in] col The column (x)
* @param[in] row The row (y)
*/
void tdispSetCursor(coord_t col, coord_t row);
/**
* @brief Store a custom character into the display
*
* @note This usually must be done after each power-up since most
* LCDs lose their RAM content.
*
* @param[in] address On which address to store the character from 0 up to (@p tdispGetNumCustomChars() - 1)
* @param[in] charmap The character to be stored.
*
* @note The charmap is made up of @p tdispGetCharBitHieght() data values. Each data value is
* made up of @p tdispGetCharBitWidth() bits of data. Note that bits in multiple rows are not
* packed.
*/
void tdispCreateChar(uint8_t address, uint8_t *charmap);
/**
* @brief Draws a single character at the current cursor position and advances the cursor
*
* @param[in] c The character to be drawn
*
* @note Writing past the end of a row leaves the cursor in an undefined position.
*/
void tdispDrawChar(char c);
/**
* @brief Draws a string at the current cursor position and advances the cursor
*
* @param[in] s The string to be drawn
*
* @note Any characters written past the end of a row may or may not be displayed on
* the next row. The cursor is also left in an undefined position.
*/
void tdispDrawString(char *s);
/**
* @brief Scrolls the display to the left or right by an amout of positions with a certain delay between each position
*
* @param[in] direction defines which direction the display has to scroll
* displayScrollLeft: scrolls the display to the left
* displayScrollRight: scrolls the display to the right
* @param[in] amount Defines the amout of characters the display must be scrolled
* @param[in] delay Defines the delay time in milliseconds between each position of the scroll. With this option the scroll can be made
* visible to the user. If you define 0, the scroll will be to fast to observe.
*/
void tdispScroll(uint16_t direction, uint16_t amount, uint16_t delay);
/**
* @brief Set the backlight using PWM-driver
*
* @param[in] percentage Sets the brightness of the display in %.
* 0% = backlight is off or very low
* 100% = backlight is set to full brightness
*/
void tdispSetBacklight(uint16_t percentage);
/**
* @brief Control different display properties
* @note A wrapper macro exists for each option, please use them
* instead of this function manually unless calling a low
* level driver specific value.
*
* @param[in] what What you want to control
* @param[in] value The value to be assigned
*/
void tdispControl(uint16_t what, uint16_t value);
/**
* @brief Set cursor move mode
*
* @param[in] mode Set if the cursor position increases or decreases everytime a character is entered.
* mode = cursorIncrease increases the cursor position
* mode = cursorDecrease decreases the cursor position
* @note cursorIncrease is default after initialisation of the display.
*
*/
#define tdispSetMoveMode(mode) tdispControl(TDISP_CTRL_MOVE, (movemode)(mode))
/**
* @brief Set display shift mode
*
* @param[in] mode Shifts the display when entering characters. The cursor position stays the same.
* mode = shiftOn shifts the display when writing a character to the display
* mode = shiftOff shrift the cursor when writing a character to the display
* @note shiftOff is default after initialisation of the display.
*
*/
#define tdispSetShiftMode(mode) tdispControl(TDISP_CTRL_SHIFT, (shiftmode)(mode))
/**
* @brief Set display mode
*
* @param[in] mode Sets the display on or off.
* mode = displayOn puts the display on
* mode = displayOff puts the display off
* @note displayOn is default after initialisation of the display
*
*/
#define tdispDisplayMode(mode) tdispControl(TDISP_CTRL_DISPLAY, (displaymode)(mode))
/**
* @brief Set the cursor shape.
*
* @param[in] shape The shape to set the cursor.
* Valid shapes are:
* cursorOff = hide cursor
* cursorBlock = show cursor as a block
* cursorBlinkingBlock = show cursor as a blinking block
* cursorUnderline = show a cursor as a thin line under a character
* cursorBlinkingUnderline = show a cursor as a blinking thin line under a character
* cursorBar = show a cursor as a thin vertical bar near a character
* cursorBlinkingBar = show a cursor as a blinking thin vertical bar near a character
* @note Not all shapes are necessarily supported. The driver will make a similar
* choice if the one specified is not available.
*/
#define tdispSetCursorShape(shape) tdispControl(TDISP_CTRL_CURSOR, (cursorshape)(shape))
/**
* @brief Get the number of columns (width) in the display
*
* @result The number of columns in the display.
*/
#define tdispGetColumns() (TDISP.columns)
/**
* @brief Get the number of rows (height) in the display
*
* @result The number of rows in the display
*/
#define tdispGetRows() (TDISP.columns)
/**
* @brief Get the number of bits in width of a character
*
* @result The number of bits in width of a character
*/
#define tdispGetCharBitWidth() (TDISP.charBitsX)
/**
* @brief Get the number of bits in height of a character
*
* @result The number of bits in height of a character
*/
#define tdispGetCharBitHeight() (TDISP.charBitsY)
/**
* @brief Get the number of custom characters
*
* @result The maximum number of custom characters that can be programmed into the display
*/
#define tdispGetNumCustomChars() (TDISP.maxCustomChars)
#ifdef __cplusplus
}
#endif
#endif /* GFX_USE_TDISP */
#endif /* _TDISP_H */
/** @} */

View File

@ -7,6 +7,7 @@ FIX: Significant improvements to the way the MCU touch driver works.
FEATURE: Add support for edge to edge touch calibration.
FEATURE: Added progressbar widget
FEATURE: Added gdispGDrawThickLine() by user jpa-
DEPRECATE: TDISP module removed
*** changes after 1.9 ***

View File

@ -22,9 +22,6 @@ extern void _gosInit(void);
#if GFX_USE_GDISP
extern void _gdispInit(void);
#endif
#if GFX_USE_TDISP
extern void _tdispInit(void);
#endif
#if GFX_USE_GWIN
extern void _gwinInit(void);
#endif
@ -78,11 +75,6 @@ void gfxInit(void) {
#if GFX_USE_GINPUT
_ginputInit();
#endif
#if GFX_USE_TDISP
_tdispInit();
tdispHome();
tdispClear();
#endif
#if GFX_USE_GADC
_gadcInit();
#endif

View File

@ -1,119 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file src/tdisp/tdisp.c
* @brief TDISP Driver code.
*
* @addtogroup TDISP
* @{
*/
#include "gfx.h"
#if GFX_USE_TDISP || defined(__DOXYGEN__)
#include "tdisp/lld/tdisp_lld.h"
/* cursor controllers */
#define TDISP_CURSOR 1
#define TDISP_CURSOR_ON 0
#define TDISP_CURSOR_OFF
#if TDISP_NEED_MULTITHREAD
static gfxMutex tdispMutex;
#define MUTEX_INIT() gfxMutexInit(&tdispMutex)
#define MUTEX_ENTER() gfxMutexEnter(&tdispMutex)
#define MUTEX_LEAVE() gfxMutexExit(&tdispMutex)
#else
#define MUTEX_INIT()
#define MUTEX_ENTER()
#define MUTEX_LEAVE()
#endif
bool_t tdispInit(void) {
bool_t res;
MUTEX_INIT();
MUTEX_ENTER();
res = tdisp_lld_init();
MUTEX_LEAVE();
return res;
}
void tdispClear(void) {
MUTEX_ENTER();
tdisp_lld_clear();
MUTEX_LEAVE();
}
void tdispHome(void) {
MUTEX_ENTER();
tdisp_lld_set_cursor(0, 0);
MUTEX_LEAVE();
}
void tdispSetCursor(coord_t col, coord_t row) {
/* Keep the input range valid */
if (row >= TDISP.rows)
row = TDISP.rows - 1;
MUTEX_ENTER();
tdisp_lld_set_cursor(col, row);
MUTEX_LEAVE();
}
void tdispCreateChar(uint8_t address, uint8_t *charmap) {
/* make sure we don't write somewhere we're not supposed to */
if (address < TDISP.maxCustomChars) {
MUTEX_ENTER();
tdisp_lld_create_char(address, charmap);
MUTEX_LEAVE();
}
}
void tdispDrawChar(char c) {
MUTEX_ENTER();
tdisp_lld_draw_char(c);
MUTEX_LEAVE();
}
void tdispDrawString(char *s) {
MUTEX_ENTER();
while(*s)
tdisp_lld_draw_char(*s++);
MUTEX_LEAVE();
}
void tdispControl(uint16_t what, uint16_t value) {
MUTEX_ENTER();
tdisp_lld_control(what, value);
MUTEX_LEAVE();
}
void tdispScroll(uint16_t direction, uint16_t amount, uint16_t delay) {
MUTEX_ENTER();
tdisp_lld_scroll(direction, amount, delay);
MUTEX_LEAVE();
}
#if TDISP_USE_BACKLIGHT
void tdispSetBacklight(uint16_t percentage) {
if (percentage > 100)
percentage = 100;
MUTEX_ENTER();
tdisp_lld_set_backlight(percentage);
MUTEX_LEAVE();
}
#endif
#endif /* GFX_USE_TDISP */
/** @} */

View File

@ -1,2 +0,0 @@
GFXSRC += $(GFXLIB)/src/tdisp/tdisp.c