2ab2d77fcb
Change coord_t to gCoord
2018-07-08 10:54:19 +10:00
41271d632b
Added new type definitions - moving towards V3.0
2018-06-23 13:02:07 +10:00
f265924396
First set of V3 macro changes
2018-02-27 17:44:21 +10:00
c5a86757bd
Make all include paths in ugfx relative.
...
The only include path now needed is for drivers (in particular GDISP drivers)
2015-11-21 19:27:08 +10:00
48a9d334b7
Replace all inline definitions with GFXINLINE
2015-10-23 18:24:49 +10:00
8f779effe1
Fix compiler warnings
2015-02-28 16:26:37 +10:00
d008c83bc7
Replace missing breaks.
2015-02-25 17:06:49 +10:00
78db2f1d49
Fix to STMPE811 touch driver to fix self-calibration in other orientations
2015-02-23 18:15:22 +10:00
fa8167b94d
Big file rename to reduce problems with brain-dead IDE's that don't handle project file hierarchies well.
...
Naming is more consistent with the new scheme.
May affect some third party drivers (header file renames).
2015-01-21 17:26:24 +10:00
2a1c7785cc
Fix the newmouse STMPE811 driver.
...
Finalise the STM32F429i-Discovery board file for that touch controller
2014-11-07 12:05:23 +10:00
804fcc7c6a
small fix
2014-10-28 10:06:24 +01:00
0129ba3dfe
Bug fix newmouse SMTPE811 touch driver
2014-10-28 11:11:58 +10:00
6343a2e844
STMPE811 fixes - still not working
2014-10-13 23:12:18 +02:00
d6b4af4ff6
Fixing STMPE811 driver
2014-10-13 23:01:01 +02:00
7c9e3e5a42
Port SMTPE811 mouse driver to newmouse (and supported boards)
2014-10-13 17:44:15 +10:00
1a495f3013
Rename all driver makefiles to driver.mk
2014-08-22 18:20:02 +10:00
08e1b0ebc7
Removed the doxygen inside of every driver as doxygen is only meant for highlevel API documentation.
...
Documenting the drivers interface should be done inside a template driver or the gdisp LLD abstraction.
2014-03-28 19:45:08 +01:00
37966ff16d
Integrate the include files with each module. Simplifies structure of code.
2014-02-19 00:36:52 +10:00
555257933a
Clean up the driver directory structure by moving all board specific files into the boards sub-structure.
2013-10-28 20:04:03 +10:00
73c5ef26f8
fixed license headers
2013-07-21 22:20:37 +02:00
d98e6c5d0d
cleaned up board file mess
2013-07-21 17:42:25 +02:00
ed0bac9765
License header updates
2013-06-15 21:37:22 +10:00
7fbfde42aa
GOS module, for operating system independance
...
GMISC fast floating point trig
GMISC fast fixed point trig
2013-05-25 01:26:52 +10:00
3374aa25c6
Reinsertion of doxygen headers
...
Reinsertion of doxygen headers that got lost in license change
2013-05-06 14:44:47 +10:00
6c38d5b310
updated license headers
2013-05-03 16:36:17 +02:00
296e74f3e0
Revert "updated license headers"
...
This reverts commit 0a26d9983b
2013-05-02 01:53:28 +02:00
0a26d9983b
updated license headers
2013-05-02 01:50:09 +02:00
f938c72044
STMPE811 tweaks
2013-03-29 20:19:35 +01:00
6ed641c91d
STMPE811 cleanup & readme
2013-03-29 19:26:56 +01:00
4440c2c887
STMPE811 getpin_pressed() -> getpin_irq()
2013-03-29 18:17:24 +01:00
2510f3e75b
board file fix
2013-03-29 18:14:35 +01:00
d6b75429b2
STMPE811 - initial
2013-03-29 18:10:22 +01:00
2f7b6fc80b
STMPE811: attempt to use FIFO
...
Very early version of using FIFO threshold interrupt.
2013-03-29 01:15:07 +01:00
dd1eb6c63d
STMPE811: working reading, writing and interrupt
...
- Slightly changed rading and writing routines.
- Added delay after reset of STMPE811 in initialization code.
- STMPE811 "interrupt service routine"
- Comments, formatting etc.
- Another commit with unfinished driver.
2013-03-25 01:10:32 +01:00
5062603188
STMPE811: reading registers over I2C
...
- Reading works.
- Some other cleanups.
Driver is not usable yet.
2013-03-20 02:42:43 +01:00
38e55c3921
STMPE811 - not tested yet
2013-03-19 22:59:04 +01:00
f552098116
embest DMSTF4BB board fix - removed FSMC suffix because only FSMC exists
2013-03-08 09:20:51 +01:00
e9cb6aa17a
small cleanup
2013-03-08 06:36:33 +01:00
4a056ae25f
STMPE811: comment fix
2013-03-08 02:11:27 +01:00
27290b5f85
STMPE811: added header with registers addresses
...
Also changed filename of board file from *_embest_lcd.h to
*_embest_dmstf4bb.h.
2013-03-08 02:02:18 +01:00
0400ba0e2d
added basic STMPE811 skeleton
2013-03-08 00:56:59 +01:00
inmarket
Joel Bodenmann
Mateusz Tomaszkiewicz