138 lines
3.6 KiB
C
138 lines
3.6 KiB
C
/*
|
|
* This file is subject to the terms of the GFX License. If a copy of
|
|
* the license was not distributed with this file, you can obtain one at:
|
|
*
|
|
* http://ugfx.io/license.html
|
|
*/
|
|
|
|
#include "gfx.h"
|
|
|
|
#if GFX_USE_GINPUT && GINPUT_NEED_MOUSE
|
|
|
|
#define GMOUSE_DRIVER_VMT GMOUSEVMT_FT5x06
|
|
#include "../../../../src/ginput/ginput_driver_mouse.h"
|
|
|
|
// Get the hardware interface
|
|
#include "gmouse_lld_FT5x06_board.h"
|
|
|
|
// Hardware definitions
|
|
#include "ft5x06.h"
|
|
|
|
static gBool MouseInit(GMouse* m, unsigned driverinstance) {
|
|
if (!init_board(m, driverinstance))
|
|
return gFalse;
|
|
|
|
aquire_bus(m);
|
|
|
|
// Init default values. (From NHD-3.5-320240MF-ATXL-CTP-1 datasheet)
|
|
// Valid touching detect threshold
|
|
write_reg(m, FT5x06_ID_G_THGROUP, 0x16);
|
|
|
|
// valid touching peak detect threshold
|
|
write_reg(m, FT5x06_ID_G_THPEAK, 0x3C);
|
|
|
|
// Touch focus threshold
|
|
write_reg(m, FT5x06_ID_G_THCAL, 0xE9);
|
|
|
|
// threshold when there is surface water
|
|
write_reg(m, FT5x06_ID_G_THWATER, 0x01);
|
|
|
|
// threshold of temperature compensation
|
|
write_reg(m, FT5x06_ID_G_THTEMP, 0x01);
|
|
|
|
// Touch difference threshold
|
|
write_reg(m, FT5x06_ID_G_THDIFF, 0xA0);
|
|
|
|
// Delay to enter 'Monitor' status (s)
|
|
write_reg(m, FT5x06_ID_G_TIME_ENTER_MONITOR, 0x0A);
|
|
|
|
// Period of 'Active' status (ms)
|
|
write_reg(m, FT5x06_ID_G_PERIODACTIVE, 0x06);
|
|
|
|
// Timer to enter 'idle' when in 'Monitor' (ms)
|
|
write_reg(m, FT5x06_ID_G_PERIODMONITOR, 0x28);
|
|
|
|
release_bus(m);
|
|
return gTrue;
|
|
}
|
|
|
|
static gBool read_xyz(GMouse* m, GMouseReading* pdr)
|
|
{
|
|
// Assume not touched.
|
|
pdr->buttons = 0;
|
|
pdr->z = 0;
|
|
|
|
aquire_bus(m);
|
|
|
|
// Only take a reading if we are touched.
|
|
if ((read_byte(m, FT5x06_TOUCH_POINTS) & 0x07)) {
|
|
|
|
/* Get the X, Y, Z values */
|
|
pdr->x = (gCoord)(read_word(m, FT5x06_TOUCH1_XH) & 0x0fff);
|
|
pdr->y = (gCoord)read_word(m, FT5x06_TOUCH1_YH);
|
|
pdr->z = 1;
|
|
|
|
// Rescale X,Y if we are using self-calibration
|
|
#if GMOUSE_FT5x06_SELF_CALIBRATE
|
|
#if GDISP_NEED_CONTROL
|
|
switch(gdispGGetOrientation(m->display)) {
|
|
default:
|
|
case gOrientation0:
|
|
case gOrientation180:
|
|
pdr->x = gdispGGetWidth(m->display) - pdr->x / (4096/gdispGGetWidth(m->display));
|
|
pdr->y = pdr->y / (4096/gdispGGetHeight(m->display));
|
|
break;
|
|
case gOrientation90:
|
|
case gOrientation270:
|
|
pdr->x = gdispGGetHeight(m->display) - pdr->x / (4096/gdispGGetHeight(m->display));
|
|
pdr->y = pdr->y / (4096/gdispGGetWidth(m->display));
|
|
break;
|
|
}
|
|
#else
|
|
pdr->x = gdispGGetWidth(m->display) - pdr->x / (4096/gdispGGetWidth(m->display));
|
|
pdr->y = pdr->y / (4096/gdispGGetHeight(m->display));
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
release_bus(m);
|
|
return gTrue;
|
|
}
|
|
|
|
const GMouseVMT const GMOUSE_DRIVER_VMT[1] = {{
|
|
{
|
|
GDRIVER_TYPE_TOUCH,
|
|
#if GMOUSE_FT5x06_SELF_CALIBRATE
|
|
GMOUSE_VFLG_TOUCH | GMOUSE_VFLG_ONLY_DOWN | GMOUSE_VFLG_POORUPDOWN,
|
|
#else
|
|
GMOUSE_VFLG_TOUCH | GMOUSE_VFLG_ONLY_DOWN | GMOUSE_VFLG_POORUPDOWN | GMOUSE_VFLG_CALIBRATE | GMOUSE_VFLG_CAL_TEST,
|
|
#endif
|
|
sizeof(GMouse) + GMOUSE_FT5x06_BOARD_DATA_SIZE,
|
|
_gmouseInitDriver,
|
|
_gmousePostInitDriver,
|
|
_gmouseDeInitDriver
|
|
},
|
|
1, // z_max - (currently?) not supported
|
|
0, // z_min - (currently?) not supported
|
|
1, // z_touchon
|
|
0, // z_touchoff
|
|
{ // pen_jitter
|
|
GMOUSE_FT5x06_PEN_CALIBRATE_ERROR, // calibrate
|
|
GMOUSE_FT5x06_PEN_CLICK_ERROR, // click
|
|
GMOUSE_FT5x06_PEN_MOVE_ERROR // move
|
|
},
|
|
{ // finger_jitter
|
|
GMOUSE_FT5x06_FINGER_CALIBRATE_ERROR, // calibrate
|
|
GMOUSE_FT5x06_FINGER_CLICK_ERROR, // click
|
|
GMOUSE_FT5x06_FINGER_MOVE_ERROR // move
|
|
},
|
|
MouseInit, // init
|
|
0, // deinit
|
|
read_xyz, // get
|
|
0, // calsave
|
|
0 // calload
|
|
}};
|
|
|
|
#endif /* GFX_USE_GINPUT && GINPUT_NEED_MOUSE */
|
|
|