ugfx/drivers/gdisp/R61505U/gdisp_lld_R61505U.c

387 lines
11 KiB
C

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.io/license.html
*/
#include "gfx.h"
#if GFX_USE_GDISP
/* This controller is only ever used with a 240 x 320 display */
#if defined(GDISP_SCREEN_HEIGHT) || defined(GDISP_SCREEN_HEIGHT)
#if GFX_COMPILER_WARNING_TYPE == GFX_COMPILER_WARNING_DIRECT
#warning "GDISP: This low level driver does not support setting a screen size. It is being ignored."
#elif GFX_COMPILER_WARNING_TYPE == GFX_COMPILER_WARNING_MACRO
COMPILER_WARNING("GDISP: This low level driver does not support setting a screen size. It is being ignored.")
#endif
#undef GDISP_SCREEN_WIDTH
#undef GDISP_SCREEN_HEIGHT
#endif
#define GDISP_DRIVER_VMT GDISPVMT_R61505U
#include "gdisp_lld_config.h"
#include "../../../src/gdisp/gdisp_driver.h"
#include "board_R61505U.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
#ifndef GDISP_SCREEN_HEIGHT
#define GDISP_SCREEN_HEIGHT 320
#endif
#ifndef GDISP_SCREEN_WIDTH
#define GDISP_SCREEN_WIDTH 240
#endif
#ifndef GDISP_INITIAL_CONTRAST
#define GDISP_INITIAL_CONTRAST 50
#endif
#ifndef GDISP_INITIAL_BACKLIGHT
#define GDISP_INITIAL_BACKLIGHT 100
#endif
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
#define dummy_read(g) { volatile gU16 dummy; dummy = read_data(g); (void) dummy; }
#define write_reg(g, reg, data) { write_index(g, reg); write_data(g, data); }
static void set_cursor(GDisplay *g) {
switch(g->g.Orientation) {
default:
case gOrientation0:
case gOrientation180:
write_reg(g, 0x20, g->p.x);
write_reg(g, 0x21, g->p.y);
break;
case gOrientation90:
case gOrientation270:
write_reg(g, 0x20, g->p.y);
write_reg(g, 0x21, g->p.x);
break;
}
write_index(g, 0x22);
}
static void set_viewport(GDisplay *g) {
switch(g->g.Orientation) {
default:
case gOrientation0:
case gOrientation180:
write_reg(g, 0x50, g->p.x);
write_reg(g, 0x51, g->p.x + g->p.cx - 1);
write_reg(g, 0x52, g->p.y);
write_reg(g, 0x53, g->p.y + g->p.cy - 1);
break;
case gOrientation90:
case gOrientation270:
write_reg(g, 0x50, g->p.y);
write_reg(g, 0x51, g->p.y + g->p.cy - 1);
write_reg(g, 0x52, g->p.x);
write_reg(g, 0x53, g->p.x + g->p.cx - 1);
break;
}
}
LLDSPEC gBool gdisp_lld_init(GDisplay *g) {
gU16 cver;
// No private area for this controller
g->priv = 0;
// Initialise the board interface
init_board(g);
/* Hardware reset */
setpin_reset(g, gTrue);
gfxSleepMicroseconds(1000);
setpin_reset(g, gFalse);
gfxSleepMicroseconds(1000);
acquire_bus(g);
write_index(g, 0); // Get controller version
setreadmode(g);
dummy_read(g);
cver = read_data(g);
setwritemode(g);
/* initializing funciton */
write_reg(g, 0xe5,0x8000); /* Set the internal vcore voltage */
write_reg(g, 0x00,0x0001); /* start OSC */
write_reg(g, 0x2b,0x0010); /* Set the frame rate as 80 when the internal resistor is used for oscillator circuit */
write_reg(g, 0x01,0x0100); /* s720 to s1 ; G1 to G320 */
write_reg(g, 0x02,0x0700); /* set the line inversion */
write_reg(g, 0x03,0x1018); /* 65536 colors */
write_reg(g, 0x04,0x0000);
write_reg(g, 0x08,0x0202); /* specify the line number of front and back porch periods respectively */
write_reg(g, 0x09,0x0000);
write_reg(g, 0x0a,0x0000);
write_reg(g, 0x0c,0x0000); /* select internal system clock */
write_reg(g, 0x0d,0x0000);
write_reg(g, 0x0f,0x0000);
write_reg(g, 0x50,0x0000); /* set windows adress */
write_reg(g, 0x51,0x00ef);
write_reg(g, 0x52,0x0000);
write_reg(g, 0x53,0x013f);
write_reg(g, 0x60,0x2700);
write_reg(g, 0x61,0x0001);
write_reg(g, 0x6a,0x0000);
write_reg(g, 0x80,0x0000);
write_reg(g, 0x81,0x0000);
write_reg(g, 0x82,0x0000);
write_reg(g, 0x83,0x0000);
write_reg(g, 0x84,0x0000);
write_reg(g, 0x85,0x0000);
write_reg(g, 0x90,0x0010);
write_reg(g, 0x92,0x0000);
write_reg(g, 0x93,0x0003);
write_reg(g, 0x95,0x0110);
write_reg(g, 0x97,0x0000);
write_reg(g, 0x98,0x0000);
/* power setting function */
write_reg(g, 0x10,0x0000);
write_reg(g, 0x11,0x0000);
write_reg(g, 0x12,0x0000);
write_reg(g, 0x13,0x0000);
gfxSleepMicroseconds(100);
write_reg(g, 0x10,0x17b0);
write_reg(g, 0x11,0x0004);
gfxSleepMicroseconds(50);
write_reg(g, 0x12,0x013e);
gfxSleepMicroseconds(50);
write_reg(g, 0x13,0x1f00);
write_reg(g, 0x29,0x000f);
gfxSleepMicroseconds(50);
write_reg(g, 0x20,0x0000);
write_reg(g, 0x21,0x0000);
/* initializing function */
write_reg(g, 0x30,0x0204);
write_reg(g, 0x31,0x0001);
write_reg(g, 0x32,0x0000);
write_reg(g, 0x35,0x0206);
write_reg(g, 0x36,0x0600);
write_reg(g, 0x37,0x0500);
write_reg(g, 0x38,0x0505);
write_reg(g, 0x39,0x0407);
write_reg(g, 0x3c,0x0500);
write_reg(g, 0x3d,0x0503);
/* display on */
write_reg(g, 0x07,0x0173);
gfxSleepMicroseconds(50);
// Finish Init
post_init_board(g);
// Release the bus
release_bus(g);
// Turn on the backlight
set_backlight(g, GDISP_INITIAL_BACKLIGHT);
/* Initialise the GDISP structure */
g->g.Width = GDISP_SCREEN_WIDTH;
g->g.Height = GDISP_SCREEN_HEIGHT;
g->g.Orientation = gOrientation0;
g->g.Powermode = gPowerOn;
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
g->g.Contrast = GDISP_INITIAL_CONTRAST;
return gTrue;
}
#if GDISP_HARDWARE_STREAM_WRITE
LLDSPEC void gdisp_lld_write_start(GDisplay *g) {
acquire_bus(g);
set_viewport(g);
#if !GDISP_HARDWARE_STREAM_POS
set_cursor(g);
#endif
}
LLDSPEC void gdisp_lld_write_color(GDisplay *g) {
write_data(g, gdispColor2Native(g->p.color));
}
LLDSPEC void gdisp_lld_write_stop(GDisplay *g) {
release_bus(g);
}
#if GDISP_HARDWARE_STREAM_POS
LLDSPEC void gdisp_lld_write_pos(GDisplay *g) {
set_cursor(g);
}
#endif
#endif
#if GDISP_HARDWARE_STREAM_READ
LLDSPEC void gdisp_lld_read_start(GDisplay *g) {
acquire_bus(g);
set_viewport(g);
set_cursor(g);
setreadmode(g);
dummy_read(g);
}
LLDSPEC gColor gdisp_lld_read_color(GDisplay *g) {
gU16 data;
data = read_data(g);
return gdispNative2Color(data);
}
LLDSPEC void gdisp_lld_read_stop(GDisplay *g) {
setwritemode(g);
release_bus(g);
}
#endif
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
LLDSPEC void gdisp_lld_control(GDisplay *g) {
switch(g->p.x) {
case GDISP_CONTROL_POWER:
if (g->g.Powermode == (gPowermode)g->p.ptr)
return;
switch((gPowermode)g->p.ptr) {
case gPowerOff:
acquire_bus(g);
write_reg(g, 0x07, 0x0000);
write_reg(g, 0x10, 0x0000);
write_reg(g, 0x11, 0x0000);
write_reg(g, 0x12, 0x0000);
write_reg(g, 0x13, 0x0000);
release_bus(g);
set_backlight(g, 0);
break;
case gPowerOn:
//*************Power On sequence ******************//
acquire_bus(g);
write_reg(g, 0x10, 0x0000); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
write_reg(g, 0x11, 0x0000); /* DC1[2:0], DC0[2:0], VC[2:0] */
write_reg(g, 0x12, 0x0000); /* VREG1OUT voltage */
write_reg(g, 0x13, 0x0000); /* VDV[4:0] for VCOM amplitude */
gfxSleepMicroseconds(2000); /* Dis-charge capacitor power voltage */
write_reg(g, 0x10, 0x17B0); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
write_reg(g, 0x11, 0x0147); /* DC1[2:0], DC0[2:0], VC[2:0] */
gfxSleepMicroseconds(500);
write_reg(g, 0x12, 0x013C); /* VREG1OUT voltage */
gfxSleepMicroseconds(500);
write_reg(g, 0x13, 0x0E00); /* VDV[4:0] for VCOM amplitude */
write_reg(g, 0x29, 0x0009); /* VCM[4:0] for VCOMH */
gfxSleepMicroseconds(500);
write_reg(g, 0x07, 0x0173); /* 262K color and display ON */
release_bus(g);
set_backlight(g, g->g.Backlight);
break;
case gPowerSleep:
acquire_bus(g);
write_reg(g, 0x07, 0x0000); /* display OFF */
write_reg(g, 0x10, 0x0000); /* SAP, BT[3:0], APE, AP, DSTB, SLP */
write_reg(g, 0x11, 0x0000); /* DC1[2:0], DC0[2:0], VC[2:0] */
write_reg(g, 0x12, 0x0000); /* VREG1OUT voltage */
write_reg(g, 0x13, 0x0000); /* VDV[4:0] for VCOM amplitude */
gfxSleepMicroseconds(2000); /* Dis-charge capacitor power voltage */
write_reg(g, 0x10, 0x0002); /* SAP, BT[3:0], APE, AP, DSTB, SLP */
release_bus(g);
set_backlight(g, 0);
break;
case gPowerDeepSleep:
acquire_bus(g);
write_reg(g, 0x07, 0x0000); /* display OFF */
write_reg(g, 0x10, 0x0000); /* SAP, BT[3:0], APE, AP, DSTB, SLP */
write_reg(g, 0x11, 0x0000); /* DC1[2:0], DC0[2:0], VC[2:0] */
write_reg(g, 0x12, 0x0000); /* VREG1OUT voltage */
write_reg(g, 0x13, 0x0000); /* VDV[4:0] for VCOM amplitude */
gfxSleepMicroseconds(2000); /* Dis-charge capacitor power voltage */
write_reg(g, 0x10, 0x0004); /* SAP, BT[3:0], APE, AP, DSTB, SLP */
release_bus(g);
set_backlight(g, 0);
break;
default:
return;
}
g->g.Powermode = (gPowermode)g->p.ptr;
return;
case GDISP_CONTROL_ORIENTATION:
if (g->g.Orientation == (gOrientation)g->p.ptr)
return;
switch((gOrientation)g->p.ptr) {
case gOrientation0:
acquire_bus(g);
write_reg(g, 0x01, 0x0100);
write_reg(g, 0x03, 0x1038);
write_reg(g, 0x60, 0x2700);
release_bus(g);
g->g.Height = GDISP_SCREEN_HEIGHT;
g->g.Width = GDISP_SCREEN_WIDTH;
break;
case gOrientation90:
acquire_bus(g);
write_reg(g, 0x01, 0x0000);
write_reg(g, 0x03, 0x1030);
write_reg(g, 0x60, 0x2700);
release_bus(g);
g->g.Height = GDISP_SCREEN_WIDTH;
g->g.Width = GDISP_SCREEN_HEIGHT;
break;
case gOrientation180:
acquire_bus(g);
write_reg(g, 0x01, 0x0000);
write_reg(g, 0x03, 0x1030);
write_reg(g, 0x60, 0x2700);
release_bus(g);
g->g.Height = GDISP_SCREEN_HEIGHT;
g->g.Width = GDISP_SCREEN_WIDTH;
break;
case gOrientation270:
acquire_bus(g);
write_reg(g, 0x01, 0x0100);
write_reg(g, 0x03, 0x1038);
write_reg(g, 0x60, 0xA700);
release_bus(g);
g->g.Height = GDISP_SCREEN_WIDTH;
g->g.Width = GDISP_SCREEN_HEIGHT;
break;
default:
return;
}
g->g.Orientation = (gOrientation)g->p.ptr;
return;
case GDISP_CONTROL_BACKLIGHT:
if ((unsigned)g->p.ptr > 100)
g->p.ptr = (void *)100;
set_backlight(g, (unsigned)g->p.ptr);
g->g.Backlight = (unsigned)g->p.ptr;
return;
default:
return;
}
}
#endif
#endif /* GFX_USE_GDISP */