uGFX/ugfx
2
0
Fork 0
Code Issues 2 Pull Requests Projects Releases Wiki Activity
08c2358542
ugfx/drivers/gdisp/SSD2119/gdisp_lld_SSD2119.c

419 lines
13 KiB
C
Raw Blame History

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.io/license.html
*/
#include "gfx.h"
#if GFX_USE_GDISP
#define GDISP_DRIVER_VMT GDISPVMT_SSD2119
#include "gdisp_lld_config.h"
#include "../../../src/gdisp/gdisp_driver.h"
#include "board_SSD2119.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
#ifndef GDISP_SCREEN_HEIGHT
#define GDISP_SCREEN_HEIGHT 240
#endif
#ifndef GDISP_SCREEN_WIDTH
#define GDISP_SCREEN_WIDTH 320
#endif
#ifndef GDISP_INITIAL_CONTRAST
#define GDISP_INITIAL_CONTRAST 50
#endif
#ifndef GDISP_INITIAL_BACKLIGHT
#define GDISP_INITIAL_BACKLIGHT 100
#endif
#ifndef GDISP_USE_DMA
#define GDISP_USE_DMA GFXOFF
#endif
#ifndef GDISP_NO_DMA_FROM_STACK
#define GDISP_NO_DMA_FROM_STACK GFXOFF
#endif
#include "ssd2119.h"
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
// Some common routines and macros
#define dummy_read(g) { volatile gU16 dummy; dummy = read_data(g); (void) dummy; }
#define write_reg(g, reg, data) { write_index(g, reg); write_data(g, data); }
static void set_cursor(GDisplay* g) {
/* Reg SSD2119_REG_X_RAM_ADDR is 9 bit value
* Reg SSD2119_REG_Y_RAM_ADDR is an 8 bit
* Use a bit mask to make sure they are not set too high
*/
switch(g->g.Orientation) {
default:
case gOrientation0:
write_reg(g, SSD2119_REG_X_RAM_ADDR, g->p.x & 0x01FF);
write_reg(g, SSD2119_REG_Y_RAM_ADDR, g->p.y & 0x00FF);
break;
case gOrientation90:
write_reg(g, SSD2119_REG_X_RAM_ADDR, g->p.y & 0x01FF);
write_reg(g, SSD2119_REG_Y_RAM_ADDR, (GDISP_SCREEN_HEIGHT-1 - g->p.x) & 0x00FF);
break;
case gOrientation180:
write_reg(g, SSD2119_REG_X_RAM_ADDR, (GDISP_SCREEN_WIDTH-1 - g->p.x) & 0x01FF);
write_reg(g, SSD2119_REG_Y_RAM_ADDR, (GDISP_SCREEN_HEIGHT-1 - g->p.y) & 0x00FF);
break;
case gOrientation270:
write_reg(g, SSD2119_REG_X_RAM_ADDR, (GDISP_SCREEN_WIDTH-1 - g->p.y) & 0x01FF);
write_reg(g, SSD2119_REG_Y_RAM_ADDR, g->p.x & 0x00FF);
break;
}
write_index(g, SSD2119_REG_RAM_DATA);
}
static void set_viewport(GDisplay* g) {
/* Reg 0x44 - Vertical RAM address position
* Upper Byte - VEA
* Lower Byte - VSA
* 0 <= VSA <= VEA <= 0xEF
* Reg 0x45,0x46 - Horizontal RAM address position
* Lower 9 bits gives 0-511 range in each value, HSA and HEA respectively
* 0 <= HSA <= HEA <= 0x13F
*/
switch(g->g.Orientation) {
default:
case gOrientation0:
write_reg(g, SSD2119_REG_V_RAM_POS, (((g->p.y + g->p.cy - 1) << 8) & 0xFF00 ) | (g->p.y & 0x00FF));
write_reg(g, SSD2119_REG_H_RAM_START, (g->p.x & 0x01FF));
write_reg(g, SSD2119_REG_H_RAM_END, (g->p.x + g->p.cx - 1) & 0x01FF);
break;
case gOrientation90:
write_reg(g, SSD2119_REG_V_RAM_POS, (((GDISP_SCREEN_HEIGHT-1 - g->p.x) & 0x00FF) << 8) | ((GDISP_SCREEN_HEIGHT - (g->p.x + g->p.cx)) & 0x00FF));
write_reg(g, SSD2119_REG_H_RAM_START, (g->p.y & 0x01FF));
write_reg(g, SSD2119_REG_H_RAM_END, (g->p.y + g->p.cy - 1) & 0x01FF);
break;
case gOrientation180:
write_reg(g, SSD2119_REG_V_RAM_POS, (((GDISP_SCREEN_HEIGHT-1 - g->p.y) & 0x00FF) << 8) | ((GDISP_SCREEN_HEIGHT - (g->p.y + g->p.cy)) & 0x00FF));
write_reg(g, SSD2119_REG_H_RAM_START, (GDISP_SCREEN_WIDTH - (g->p.x + g->p.cx)) & 0x01FF);
write_reg(g, SSD2119_REG_H_RAM_END, (GDISP_SCREEN_WIDTH-1 - g->p.x) & 0x01FF);
break;
case gOrientation270:
write_reg(g, SSD2119_REG_V_RAM_POS, (((g->p.x + g->p.cx - 1) << 8) & 0xFF00 ) | (g->p.x & 0x00FF));
write_reg(g, SSD2119_REG_H_RAM_START, (GDISP_SCREEN_WIDTH - (g->p.y + g->p.cy)) & 0x01FF);
write_reg(g, SSD2119_REG_H_RAM_END, (GDISP_SCREEN_WIDTH-1 - g->p.y) & 0x01FF);
break;
}
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
LLDSPEC gBool gdisp_lld_init(GDisplay* g) {
// no private area for this controller
g->priv = 0;
// initialise the board interface
init_board(g);
// Hardware reset
setpin_reset(g, gTrue);
gfxSleepMilliseconds(20);
setpin_reset(g, gFalse);
gfxSleepMilliseconds(20);
// Get the bus for the following initialisation commands
acquire_bus(g);
// Enter sleep mode (if we are not already there).
write_reg(g, SSD2119_REG_SLEEP_MODE_1, 0x0001);
gfxSleepMicroseconds(5);
// Set initial power parameters.
write_reg(g, SSD2119_REG_PWR_CTRL_5, 0x00B2);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_VCOM_OTP_1, 0x0006);
gfxSleepMicroseconds(5);
// Start the oscillator.
write_reg(g, SSD2119_REG_OSC_START, 0x0001);
gfxSleepMicroseconds(5);
// Set pixel format and basic display orientation (scanning direction).
write_reg(g, SSD2119_REG_OUTPUT_CTRL, 0x30EF);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_LCD_DRIVE_AC_CTRL, 0x0600);
gfxSleepMicroseconds(5);
// Exit sleep mode.
write_reg(g, SSD2119_REG_SLEEP_MODE_1, 0x0000);
gfxSleepMicroseconds(5);
// Configure pixel color format and MCU interface parameters.
write_reg(g, SSD2119_REG_ENTRY_MODE, 0x6830); // ENTRY_MODE_DEFAULT
gfxSleepMicroseconds(5);
// Set analog parameters.
write_reg(g, SSD2119_REG_SLEEP_MODE_2, 0x0999);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_ANALOG_SET, 0x3800);
gfxSleepMicroseconds(5);
// Enable the display.
write_reg(g, SSD2119_REG_DISPLAY_CTRL, 0x0033);
gfxSleepMicroseconds(5);
// Set VCIX2 voltage to 6.1V.
write_reg(g, SSD2119_REG_PWR_CTRL_2, 0x0005);
gfxSleepMicroseconds(5);
// Configure gamma correction.
write_reg(g, SSD2119_REG_GAMMA_CTRL_1, 0x0000);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_GAMMA_CTRL_2, 0x0303);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_GAMMA_CTRL_3, 0x0407);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_GAMMA_CTRL_4, 0x0301);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_GAMMA_CTRL_5, 0x0301);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_GAMMA_CTRL_6, 0x0403);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_GAMMA_CTRL_7, 0x0707);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_GAMMA_CTRL_8, 0x0400);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_GAMMA_CTRL_9, 0x0a00);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_GAMMA_CTRL_10, 0x1000);
gfxSleepMicroseconds(5);
// Configure Vlcd63 and VCOMl.
write_reg(g, SSD2119_REG_PWR_CTRL_3, 0x000A);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_PWR_CTRL_4, 0x2E00);
gfxSleepMicroseconds(5);
// Set the display size and ensure that the GRAM window is set to allow access to the full display buffer.
write_reg(g, SSD2119_REG_V_RAM_POS, (GDISP_SCREEN_HEIGHT - 1) << 8);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_H_RAM_START, 0x0000);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_H_RAM_END, GDISP_SCREEN_WIDTH - 1);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_X_RAM_ADDR, 0x00);
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_Y_RAM_ADDR, 0x00);
gfxSleepMicroseconds(5);
// Finish Init
post_init_board(g);
// Release the bus
release_bus(g);
/* Turn on the back-light */
set_backlight(g, GDISP_INITIAL_BACKLIGHT);
/* Initialise the GDISP structure */
g->g.Width = GDISP_SCREEN_WIDTH;
g->g.Height = GDISP_SCREEN_HEIGHT;
g->g.Orientation = gOrientation0;
g->g.Powermode = gPowerOn;
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
g->g.Contrast = GDISP_INITIAL_CONTRAST;
return gTrue;
}
#if GDISP_HARDWARE_STREAM_WRITE
LLDSPEC void gdisp_lld_write_start(GDisplay* g) {
acquire_bus(g);
set_viewport(g);
}
LLDSPEC void gdisp_lld_write_color(GDisplay* g) {
write_data(g, gdispColor2Native(g->p.color));
}
LLDSPEC void gdisp_lld_write_stop(GDisplay* g) {
release_bus(g);
}
LLDSPEC void gdisp_lld_write_pos(GDisplay* g) {
set_cursor(g);
}
#endif
#if GDISP_HARDWARE_STREAM_READ
LLDSPEC void gdisp_lld_read_start(GDisplay* g) {
acquire_bus(g);
set_viewport(g);
set_cursor(g);
setreadmode(g);
dummy_read(g);
}
LLDSPEC gColor gdisp_lld_read_color(GDisplay* g) {
gU16 data;
data = read_data(g);
return gdispNative2Color(data);
}
LLDSPEC void gdisp_lld_read_stop(GDisplay* g) {
setwritemode(g);
release_bus(g);
}
#endif
#if GDISP_HARDWARE_FILLS && GDISP_USE_DMA
LLDSPEC void gdisp_lld_fill_area(GDisplay* g) {
#if GDISP_NO_DMA_FROM_STACK
static LLDCOLOR_TYPE c;
#else
LLDCOLOR_TYPE c;
#endif
c = gdispColor2Native(g->p.color);
acquire_bus(g);
set_viewport(g);
set_cursor(g);
dma_with_noinc(g, &c, g->p.cx * g->p.cy);
release_bus(g);
}
#endif
#if GDISP_HARDWARE_BITFILLS && GDISP_USE_DMA
#if GDISP_PIXELFORMAT != GDISP_LLD_PIXELFORMAT
#error "GDISP: SSD2119: BitBlit is only available in RGB565 pixel format"
#endif
LLDSPEC void gdisp_lld_blit_area(GDisplay* g) {
gPixel* buffer;
gCoord ycnt;
buffer = (gPixel*)g->p.ptr + g->p.x1 + g->p.y1 * g->p.x2;
acquire_bus(g);
set_viewport(g);
set_cursor(g);
if (g->p.x2 == g->p.cx) {
dma_with_inc(g, buffer, g->p.cx * g->p.cy);
} else {
for (ycnt = g->p.cy; ycnt; ycnt--, buffer += g->p.x2)
dma_with_inc(g, buffer, g->p.cy);
}
release_bus(g);
}
#endif
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
LLDSPEC void gdisp_lld_control(GDisplay *g) {
switch(g->p.x) {
case GDISP_CONTROL_POWER:
if (g->g.Powermode == (gPowermode)g->p.ptr)
return;
switch((gPowermode)g->p.ptr) {
case gPowerOff:
case gPowerDeepSleep:
acquire_bus(g);
write_reg(g, SSD2119_REG_SLEEP_MODE_1, 0x0001); // Enter sleep mode
write_reg(g, SSD2119_REG_SLEEP_MODE_2, 0x2999); // Enable deep sleep function
write_reg(g, SSD2119_REG_DISPLAY_CTRL, 0x0000); // Display off
if ((gPowermode)g->p.ptr == gPowerOff)
write_reg(g, SSD2119_REG_OSC_START, 0x0000); // Turn off oscillator
release_bus(g);
set_backlight(g, 0);
break;
case gPowerSleep:
acquire_bus(g);
write_reg(g, SSD2119_REG_SLEEP_MODE_1, 0x0001); // Enter sleep mode
write_reg(g, SSD2119_REG_DISPLAY_CTRL, 0x0000); // Display off
release_bus(g);
set_backlight(g, 0);
break;
case gPowerOn:
acquire_bus(g);
if (g->g.Powermode == gPowerOff) {
write_reg(g, SSD2119_REG_OSC_START, 0x0001); // Start the oscillator
gfxSleepMicroseconds(5);
write_reg(g, SSD2119_REG_SLEEP_MODE_2, 0x0999); // Disable deep sleep function
} else if (g->g.Powermode == gPowerDeepSleep)
write_reg(g, SSD2119_REG_SLEEP_MODE_2, 0x0999); // Disable deep sleep function
write_reg(g, SSD2119_REG_SLEEP_MODE_1, 0x0000); // Leave sleep mode
write_reg(g, SSD2119_REG_DISPLAY_CTRL, 0x0033); // Display on
release_bus(g);
gfxSleepMicroseconds(25);
set_backlight(g, g->g.Backlight);
break;
default:
return;
}
g->g.Powermode = (gPowermode)g->p.ptr;
return;
case GDISP_CONTROL_ORIENTATION:
if (g->g.Orientation == (gOrientation)g->p.ptr)
return;
switch((gOrientation)g->p.ptr) {
case gOrientation0:
acquire_bus(g);
/* ID = 11 AM = 0 */
write_reg(g, SSD2119_REG_ENTRY_MODE, 0x6830);
release_bus(g);
g->g.Height = GDISP_SCREEN_HEIGHT;
g->g.Width = GDISP_SCREEN_WIDTH;
break;
case gOrientation90:
acquire_bus(g);
/* ID = 01 AM = 1 */
write_reg(g, SSD2119_REG_ENTRY_MODE, 0x6818);
release_bus(g);
g->g.Height = GDISP_SCREEN_WIDTH;
g->g.Width = GDISP_SCREEN_HEIGHT;
break;
case gOrientation180:
acquire_bus(g);
/* ID = 00 AM = 0 */
write_reg(g, SSD2119_REG_ENTRY_MODE, 0x6800);
release_bus(g);
g->g.Height = GDISP_SCREEN_HEIGHT;
g->g.Width = GDISP_SCREEN_WIDTH;
break;
case gOrientation270:
acquire_bus(g);
/* ID = 10 AM = 1 */
write_reg(g, SSD2119_REG_ENTRY_MODE, 0x6828);
release_bus(g);
g->g.Height = GDISP_SCREEN_WIDTH;
g->g.Width = GDISP_SCREEN_HEIGHT;
break;
default:
return;
}
g->g.Orientation = (gOrientation)g->p.ptr;
return;
case GDISP_CONTROL_BACKLIGHT:
if ((unsigned)g->p.ptr > 100)
g->p.ptr = (void *)100;
set_backlight(g, (unsigned)g->p.ptr);
g->g.Backlight = (unsigned)g->p.ptr;
return;
//case GDISP_CONTROL_CONTRAST:
default:
return;
}
}
#endif
#endif /* GFX_USE_GDISP */
Reference in New Issue View Git Blame Copy Permalink