ugfx/boards/base/HY-MiniSTM32V/board_SSD1289.h
2015-02-01 17:35:18 +01:00

200 lines
5.5 KiB
C

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
#ifndef GDISP_LLD_BOARD_H
#define GDISP_LLD_BOARD_H
/*
* Board file for HY-MiniSTM32V board from HAOYU (China).
* www.powermcu.com or www.hotmcu.com.
*/
/*
* NOTE: In order to make this work you need to set:
* STM32_PWM_USE_TIM3 TRUE in mcuconf.h
* HAL_USE_PWM TRUE in halconf.h
*/
/*
* TM3 ch2 is connected to LCD BL_CNT (PB5)
*/
static const PWMConfig pwmcfg =
{
100000, // frequency
100, // period
NULL, // callback
{
{PWM_OUTPUT_DISABLED, 0},
{PWM_OUTPUT_ACTIVE_HIGH, 0},
{PWM_OUTPUT_DISABLED, 0},
{PWM_OUTPUT_DISABLED, 0}
},
0, // cr2
0, // dier
};
/*
* LCD_RS is on A16 (PD11)
*/
#define GDISP_REG (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */
#define GDISP_RAM (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */
/*
* STM32_DMA1_STREAM7
* NOTE: conflicts w/ USART2_TX, TIM2_CH2, TIM2_CH4, TIM4_UP, I2C1_RX in case
*/
#define GDISP_DMA_STREAM STM32_DMA1_STREAM7
#define FSMC_BANK 0
static inline void init_board(GDisplay *g) {
/*
* As we are not using multiple displays we set g->board to NULL as we don't
* use it.
*/
g->board = 0;
switch(g->controllerdisplay) {
/*
* Set up for Display 0
*/
case 0:
/* FSMC setup for F1 */
rccEnableAHB(RCC_AHBENR_FSMCEN, 0);
/* Group pins for FSMC setup as alternate function */
IOBus busD = { GPIOD, (1 << 0) | (1 << 1) | (1 << 4) | (1 << 5) | \
(1 << 7) | (1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) | \
(1 << 14) | (1 << 15), 0 };
IOBus busE = { GPIOE, (1 << 7) | (1 << 8) | (1 << 9) | (1 << 10) | \
(1 << 11) | (1 << 12) | (1 << 13) | (1 << 14) | \
(1 << 15), 0 };
/* FSMC sa alternate function */
palSetBusMode(&busD, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
palSetBusMode(&busE, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
/*
* NOTE: stm32F10x.h is FAULTY on FSMC
* NOTE: Used hardcore bit shifting below
* NOTE: All timings for 72MHz HCLK - should be revised for lower HCLK
*/
/* FSMC timing - Read: DATAST = 0x20; all the rest = 0.
* 100ns cycle time for SSD1289 as per DataSheet
*/
FSMC_Bank1->BTCR[FSMC_BANK+1] = (0x20 << 8);
/* FSMC timing - Write: DATAST = 0x01, ADDSET = 0x01 all the rest = 0.
* 1000ns cycle time for SSD1289 as per DataSheet
*/
FSMC_Bank1E->BWTR[FSMC_BANK] = (0x1 << 8) | (0x01 << 0);
/* Bank1 NOR/SRAM control register configuration
* Note: different read and write cycle timing
*/
FSMC_Bank1->BTCR[FSMC_BANK] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | \
FSMC_BCR1_MBKEN | FSMC_BCR1_EXTMOD;
/* DMA Setup. */
#if defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM)
if (dmaStreamAllocate(GDISP_DMA_STREAM, 0, 0, 0))
gfxExit();
dmaStreamSetMemory0(GDISP_DMA_STREAM, &GDISP_RAM);
dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | \
STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | \
STM32_DMA_CR_DIR_M2M);
#endif
/* Display backlight control */
/* TIM3 ch2 (PB5) connected to LCD BL_CNT */
pwmStart(&PWMD3, &pwmcfg);
palSetPadMode(GPIOB, 5, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
pwmEnableChannel(&PWMD3, 1, 100);
break;
}
}
static inline void post_init_board(GDisplay *g) {
(void) g;
}
static inline void setpin_reset(GDisplay *g, bool_t state) {
(void) g;
if(state) {}
else {}
}
static inline void set_backlight(GDisplay *g, uint8_t percent) {
(void) g;
if (percent > 100) { percent = 100; }
pwmEnableChannel(&PWMD3, 1, percent);
}
static inline void acquire_bus(GDisplay *g) {
(void) g;
}
static inline void release_bus(GDisplay *g) {
(void) g;
}
static inline void write_index(GDisplay *g, uint16_t index) {
(void) g;
GDISP_REG = index;
}
static inline void write_data(GDisplay *g, uint16_t data) {
(void) g;
GDISP_RAM = data;
}
static inline void setreadmode(GDisplay *g) {
(void) g;
}
static inline void setwritemode(GDisplay *g) {
(void) g;
}
static inline uint16_t read_data(GDisplay *g) {
(void) g;
return GDISP_RAM;
}
#if defined(GDISP_USE_DMA) || defined(__DOXYGEN__)
static inline void dma_with_noinc(GDisplay *g, color_t *buffer, int area) {
(void) g;
dmaStreamSetPeripheral(GDISP_DMA_STREAM, buffer);
dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | \
STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | \
STM32_DMA_CR_DIR_M2M);
for (; area > 0; area -= 65535) {
dmaStreamSetTransactionSize(GDISP_DMA_STREAM, area > 65535 ? 65535 : area);
dmaStreamEnable(GDISP_DMA_STREAM);
dmaWaitCompletion(GDISP_DMA_STREAM);
}
}
static inline void dma_with_inc(GDisplay *g, color_t *buffer, int area) {
(void) g;
dmaStreamSetPeripheral(GDISP_DMA_STREAM, buffer);
dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PINC | \
STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | \
STM32_DMA_CR_DIR_M2M);
for (; area > 0; area -= 65535) {
dmaStreamSetTransactionSize(GDISP_DMA_STREAM, area > 65535 ? 65535 : area);
dmaStreamEnable(GDISP_DMA_STREAM);
dmaWaitCompletion(GDISP_DMA_STREAM);
}
}
#endif
#endif /* GDISP_LLD_BOARD_H */