ugfx/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_example.h
2013-06-15 21:37:22 +10:00

123 lines
3.2 KiB
C

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://chibios-gfx.com/license.html
*/
/**
* @file drivers/gdisp/Nokia6610GE12/gdisp_lld_board_example.h
* @brief GDISP Graphic Driver subsystem board interface for the Nokia6610 GE12 display.
*
* @addtogroup GDISP
* @{
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
/**
* @brief Initialise the board for the display.
* @notes Performs the following functions:
* 1. initialise the spi port used by your display
* 2. initialise the reset pin (initial state not-in-reset)
* 3. initialise the chip select pin (initial state not-active)
* 4. initialise the backlight pin (initial state back-light off)
*
* @notapi
*/
static inline void init_board(void) {
/* Code here */
#error "gdispNokia6610GE12: You must supply a definition for init_board for your board"
}
/**
* @brief Set or clear the lcd reset pin.
*
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
*
* @notapi
*/
static inline void setpin_reset(bool_t state) {
/* Code here */
#error "gdispNokia6610GE12: You must supply a definition for setpin_reset for your board"
}
/**
* @brief Set the lcd back-light level.
* @note For now 0% turns the backlight off, anything else the backlight is on.
* While the hardware supports PWM backlight control, we are not using it
* yet.
*
* @param[in] percent 0 to 100%
*
* @notapi
*/
static inline void set_backlight(uint8_t percent) {
/* Code here */
#error "gdispNokia6610GE12: You must supply a definition for set_backlight for your board"
}
/**
* @brief Take exclusive control of the bus
*
* @notapi
*/
static inline void acquire_bus(void) {
/* Code here */
#error "gdispNokia6610GE12: You must supply a definition for acquire_bus for your board"
}
/**
* @brief Release exclusive control of the bus
*
* @notapi
*/
static inline void release_bus(void) {
/* Code here */
#error "gdispNokia6610GE12: You must supply a definition for release_bus for your board"
}
/**
* @brief Send an 8 bit command to the lcd.
*
* @param[in] cmd The command to send
*
* @notapi
*/
static inline void write_cmd(uint16_t cmd) {
/* Code here */
#error "gdispNokia6610GE12: You must supply a definition for write_cmd for your board"
}
/**
* @brief Send an 8 bit data to the lcd.
*
* @param[in] data The data to send
*
* @notapi
*/
static inline void write_data(uint16_t data) {
/* Code here */
#error "gdispNokia6610GE12: You must supply a definition for write_data for your board"
}
#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)
/**
* @brief Read data from the lcd.
*
* @return The data from the lcd
* @note The chip select may need to be asserted/de-asserted
* around the actual spi read
*
* @notapi
*/
static inline uint16_t read_data(void) {
/* Code here */
#error "gdispNokia6610GE12: You must supply a definition for read_data for your board"
}
#endif
#endif /* _GDISP_LLD_BOARD_H */
/** @} */