120 lines
2.8 KiB
C
120 lines
2.8 KiB
C
/*
|
|
* This file is subject to the terms of the GFX License. If a copy of
|
|
* the license was not distributed with this file, you can obtain one at:
|
|
*
|
|
* http://ugfx.io/license.html
|
|
*/
|
|
|
|
#ifndef _GDISP_LLD_BOARD_H
|
|
#define _GDISP_LLD_BOARD_H
|
|
|
|
// For a multiple display configuration we would put all this in a structure and then
|
|
// set g->board to that structure.
|
|
#define SET_CS palSetPad(GPIOE, GPIOE_LCD_CS);
|
|
#define CLR_CS palClearPad(GPIOE, GPIOE_LCD_CS);
|
|
#define SET_RS palSetPad(GPIOE, GPIOE_LCD_RS);
|
|
#define CLR_RS palClearPad(GPIOE, GPIOE_LCD_RS);
|
|
#define SET_WR palSetPad(GPIOE, GPIOE_PMWR);
|
|
#define CLR_WR palClearPad(GPIOE, GPIOE_PMWR);
|
|
#define SET_RD palSetPad(GPIOE, GPIOE_PMRD);
|
|
#define CLR_RD palClearPad(GPIOE, GPIOE_PMRD);
|
|
|
|
static GFXINLINE void init_board(GDisplay *g) {
|
|
|
|
// As we are not using multiple displays we set g->board to NULL as we don't use it.
|
|
g->board = 0;
|
|
|
|
switch(g->controllerdisplay) {
|
|
case 0: // Set up for Display 0
|
|
/* Configure the pins to a well know state */
|
|
SET_RS;
|
|
SET_RD;
|
|
SET_WR;
|
|
CLR_CS;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static GFXINLINE void post_init_board(GDisplay *g) {
|
|
(void) g;
|
|
}
|
|
|
|
static GFXINLINE void setpin_reset(GDisplay *g, gBool state) {
|
|
(void) g;
|
|
if(state) {
|
|
// reset lcd
|
|
palClearPad(GPIOE, GPIOE_LCD_RST);
|
|
} else {
|
|
palSetPad(GPIOE, GPIOE_LCD_RST);
|
|
}
|
|
}
|
|
|
|
static GFXINLINE void set_backlight(GDisplay *g, gU8 percent) {
|
|
(void) g;
|
|
// TODO: can probably pwm this
|
|
if(percent) {
|
|
// turn back light on
|
|
palSetPad(GPIOE, GPIOE_LCD_BLED);
|
|
} else {
|
|
// turn off
|
|
palClearPad(GPIOE, GPIOE_LCD_BLED);
|
|
}
|
|
}
|
|
|
|
static GFXINLINE void acquire_bus(GDisplay *g) {
|
|
(void) g;
|
|
}
|
|
|
|
static GFXINLINE void release_bus(GDisplay *g) {
|
|
(void) g;
|
|
}
|
|
|
|
/**
|
|
* @brief Short delay
|
|
*
|
|
* @param[in] dly Length of delay
|
|
*
|
|
* @notapi
|
|
*/
|
|
static GFXINLINE void ili9341_delay(gU16 dly) {
|
|
static gU16 i;
|
|
for(i = 0; i < dly; i++)
|
|
asm("nop");
|
|
}
|
|
|
|
static GFXINLINE void write_index(GDisplay *g, gU16 index) {
|
|
(void) g;
|
|
palWriteGroup(GPIOE, 0x00FF, 0, index);
|
|
CLR_RS; CLR_WR; ili9341_delay(1); SET_WR; ili9341_delay(1); SET_RS;
|
|
}
|
|
|
|
static GFXINLINE void write_data(GDisplay *g, gU16 data) {
|
|
(void) g;
|
|
palWriteGroup(GPIOE, 0x00FF, 0, data);
|
|
CLR_WR; ili9341_delay(1); SET_WR; ili9341_delay(1);
|
|
}
|
|
|
|
static GFXINLINE void setreadmode(GDisplay *g) {
|
|
(void) g;
|
|
// change pin mode to digital input
|
|
palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_INPUT);
|
|
}
|
|
|
|
static GFXINLINE void setwritemode(GDisplay *g) {
|
|
(void) g;
|
|
// change pin mode back to digital output
|
|
palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
|
|
}
|
|
|
|
static GFXINLINE gU16 read_data(GDisplay *g) {
|
|
gU16 value;
|
|
(void) g;
|
|
CLR_RD;
|
|
value = palReadPort(GPIOE);
|
|
value = palReadPort(GPIOE);
|
|
SET_RD;
|
|
return value;
|
|
}
|
|
|
|
#endif /* _GDISP_LLD_BOARD_H */
|