101 lines
2.9 KiB
C
Executable File
101 lines
2.9 KiB
C
Executable File
#ifndef _BOARD_H_
|
|
#define _BOARD_H_
|
|
|
|
// Board identifier.
|
|
#define BOARD_FIREBULL_STM32_F103
|
|
#define BOARD_NAME "FireBull STM32F103-FB"
|
|
|
|
// Board frequencies.
|
|
#define STM32_LSECLK 32768
|
|
#define STM32_HSECLK 8000000
|
|
|
|
// MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
|
|
#define STM32F10X_HD
|
|
|
|
// IO pins assignments.
|
|
#define GPIOA_BUTTON 8
|
|
|
|
#define GPIOD_LED1 8
|
|
#define GPIOD_LED2 9
|
|
#define GPIOD_LED3 10
|
|
#define GPIOD_LED4 11
|
|
|
|
#define GPIOA_SPI1NSS 4
|
|
#define GPIOB_SPI2NSS 12
|
|
#define GPIOA_SPI3NSS 15
|
|
#define GPIOA_MMCCP 4
|
|
#define GPIOC_SDPWR 8
|
|
#define GPIOC_USB_EN 9
|
|
|
|
#define TP_CS_PORT GPIOC
|
|
#define TP_IRQ_PORT GPIOC
|
|
#define TP_IRQ 4
|
|
#define TP_CS 6
|
|
|
|
#define GDISP_DATA_PORT GPIOE
|
|
#define GDISP_CMD_PORT GPIOD
|
|
#define GDISP_CS 12
|
|
#define GDISP_RS 13
|
|
#define GDISP_WR 14
|
|
#define GDISP_RD 15
|
|
|
|
/*
|
|
* I/O ports initial setup, this configuration is established soon after reset
|
|
* in the initialization code.
|
|
*
|
|
* The digits have the following meaning:
|
|
* 0 - Analog input.
|
|
* 1 - Push Pull output 10MHz.
|
|
* 2 - Push Pull output 2MHz.
|
|
* 3 - Push Pull output 50MHz.
|
|
* 4 - Digital input.
|
|
* 5 - Open Drain output 10MHz.
|
|
* 6 - Open Drain output 2MHz.
|
|
* 7 - Open Drain output 50MHz.
|
|
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
|
|
* 9 - Alternate Push Pull output 10MHz.
|
|
* A - Alternate Push Pull output 2MHz.
|
|
* B - Alternate Push Pull output 50MHz.
|
|
* C - Reserved.
|
|
* D - Alternate Open Drain output 10MHz.
|
|
* E - Alternate Open Drain output 2MHz.
|
|
* F - Alternate Open Drain output 50MHz.
|
|
* Please refer to the STM32 Reference Manual for details.
|
|
*/
|
|
|
|
#define VAL_GPIOACRL 0xB4B44B34 /* PA7...PA0 */
|
|
#define VAL_GPIOACRH 0x444334B4 /* PA15...PA8 */
|
|
#define VAL_GPIOAODR 0xFFFFFFFF
|
|
|
|
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
|
|
#define VAL_GPIOBCRH 0xB4B88888 /* PB15...PB8 */
|
|
#define VAL_GPIOBODR 0xFFFFFFFF
|
|
|
|
#define VAL_GPIOCCRL 0x33048888 /* PC7...PC0 */
|
|
#define VAL_GPIOCCRH 0x88833383 /* PC15...PC8 */
|
|
#define VAL_GPIOCODR 0xFFFFFFFF
|
|
|
|
#define VAL_GPIODCRL 0x33388888 /* PD7...PD0 */
|
|
#define VAL_GPIODCRH 0x33333333 /* PD15...PD8 */
|
|
#define VAL_GPIODODR 0xFFFFFFFF
|
|
|
|
#define VAL_GPIOECRL 0x33333333 /* PE7...PE0 */
|
|
#define VAL_GPIOECRH 0x33333333 /* PE15...PE8 */
|
|
#define VAL_GPIOEODR 0xFFFFFFFF
|
|
|
|
#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_EN)
|
|
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_EN)
|
|
|
|
#if !defined(_FROM_ASM_)
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
void boardInit(void);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif /* _FROM_ASM_ */
|
|
|
|
#endif /* _BOARD_H_ */
|
|
|