uGFX/ugfx
2
0
Fork 0
Code Issues 2 Pull Requests Projects Releases Wiki Activity
e611e25a0d
ugfx/boards/base/Olimex-SAM7EX256-GE8
History
inmarket 739b3b1699 Update some makefiles and openocd config files
2015-11-27 10:13:23 +10:00
..
example Update some makefiles and openocd config files 2015-11-27 10:13:23 +10:00
board_Nokia6610GE8.h Replace all inline definitions with GFXINLINE 2015-10-23 18:24:49 +10:00
board_SSD1306_i2c.h Replace all inline definitions with GFXINLINE 2015-10-23 18:24:49 +10:00
board_SSD1306_spi.h Replace all inline definitions with GFXINLINE 2015-10-23 18:24:49 +10:00
board_SSD1331.h Replace all inline definitions with GFXINLINE 2015-10-23 18:24:49 +10:00
board_TLS8204.h Replace all inline definitions with GFXINLINE 2015-10-23 18:24:49 +10:00
board_uext.h Improve the UEXT bus descriptor file 2015-05-09 23:38:47 +10:00
board.mk Rename all driver makefiles to driver.mk 2014-08-22 18:20:02 +10:00
gadc_lld_board.h
gaudio_play_board.h Turn on PWM audio output for Olimex SAM7EX256 board. 2014-03-30 19:11:29 +10:00
gaudio_record_board.h Updates to GADC to use new simpler gfx queued bufferring. 2014-03-20 23:41:27 +10:00
ginput_lld_dial_board.h
ginput_lld_toggle_board.h
readme.txt Add stm32m3 make option and fix stm32m1 make option 2015-06-08 11:31:23 +10:00

readme.txt 

This directory contains the interface for the Olimex SAM7EX256 board
running under ChibiOS.

On this board uGFX currently supports:
	- GDISP via the Nokia6610GE8 display 
	- GADC via the AT91SAM7 driver
	- GINPUT-dials via the GADC driver
	- GINPUT-toggles via the Pal driver
	- GAUDIO recording via the GADC driver

Note there are two variants of this board - one with the GE8 display
	and one with the GE12 display. This one is for the GE8 display.
	
There is an example Makefile and project in the examples directory.

There are also board files predefined for (just add driver to the makefile):
	- TLS8204 on the UEXT connector (Olimex MOD3310)
	- SSD1306 on the UEXT connector using SPI	(copy board_SSD1306_spi.h to board_SSD1306.h in your project directory)
	- SSD1306 on the UEXT connector using I2C	(copy board_SSD1306_i2c.h to board_SSD1306.h in your project directory)
	
If you are using the uGFX makefiles use OPT_CPU=at91sam7 in your makefile to get the correct cpu.