ugfx/drivers/gdisp/Nokia6610GE8/gdisp_lld_board_example.h
2013-02-11 09:25:45 +01:00

136 lines
3.8 KiB
C

/*
ChibiOS/GFX - Copyright (C) 2012
Joel Bodenmann aka Tectu <joel@unormal.org>
This file is part of ChibiOS/GFX.
ChibiOS/GFX is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/GFX is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file drivers/gdisp/Nokia6610GE8/gdisp_lld_board_example.h
* @brief GDISP Graphic Driver subsystem board interface for the Nokia6610 GE8 display.
*
* @addtogroup GDISP
* @{
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
/**
* @brief Initialise the board for the display.
* @notes Performs the following functions:
* 1. initialise the spi port used by your display
* 2. initialise the reset pin (initial state not-in-reset)
* 3. initialise the chip select pin (initial state not-active)
* 4. initialise the backlight pin (initial state back-light off)
*
* @notapi
*/
static __inline void init_board(void) {
/* Code here */
#error "gdispNokia6610GE8: You must supply a definition for init_board for your board"
}
/**
* @brief Set or clear the lcd reset pin.
*
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
*
* @notapi
*/
static __inline void setpin_reset(bool_t state) {
/* Code here */
#error "gdispNokia6610GE8: You must supply a definition for setpin_reset for your board"
}
/**
* @brief Set the lcd back-light level.
* @note For now 0% turns the backlight off, anything else the backlight is on.
* While the hardware supports PWM backlight control, we are not using it
* yet.
*
* @param[in] percent 0 to 100%
*
* @notapi
*/
static __inline void set_backlight(uint8_t percent) {
/* Code here */
#error "gdispNokia6610GE8: You must supply a definition for set_backlight for your board"
}
/**
* @brief Take exclusive control of the bus
*
* @notapi
*/
static __inline void acquire_bus(void) {
/* Code here */
#error "gdispNokia6610GE8: You must supply a definition for acquire_bus for your board"
}
/**
* @brief Release exclusive control of the bus
*
* @notapi
*/
static __inline void release_bus(void) {
/* Code here */
#error "gdispNokia6610GE8: You must supply a definition for release_bus for your board"
}
/**
* @brief Send an 8 bit command to the lcd.
*
* @param[in] cmd The command to send
*
* @notapi
*/
static __inline void write_cmd(uint16_t cmd) {
/* Code here */
#error "gdispNokia6610GE8: You must supply a definition for write_cmd for your board"
}
/**
* @brief Send an 8 bit data to the lcd.
*
* @param[in] data The data to send
*
* @notapi
*/
static __inline void write_data(uint16_t data) {
/* Code here */
#error "gdispNokia6610GE8: You must supply a definition for write_data for your board"
}
#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)
/**
* @brief Read data from the lcd.
*
* @return The data from the lcd
* @note The chip select may need to be asserted/de-asserted
* around the actual spi read
*
* @notapi
*/
static __inline uint16_t read_data(void) {
/* Code here */
#error "gdispNokia6610GE8: You must supply a definition for read_data for your board"
}
#endif
#endif /* _GDISP_LLD_BOARD_H */
/** @} */