ugfx/boards/base/Mikromedia-STM32-M4-ILI9341/board_ILI9341.h

120 lines
2.8 KiB
C
Raw Permalink Normal View History

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
2018-10-01 15:32:39 +00:00
* http://ugfx.io/license.html
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
// For a multiple display configuration we would put all this in a structure and then
// set g->board to that structure.
#define SET_CS palSetPad(GPIOE, GPIOE_LCD_CS);
#define CLR_CS palClearPad(GPIOE, GPIOE_LCD_CS);
#define SET_RS palSetPad(GPIOE, GPIOE_LCD_RS);
#define CLR_RS palClearPad(GPIOE, GPIOE_LCD_RS);
#define SET_WR palSetPad(GPIOE, GPIOE_PMWR);
#define CLR_WR palClearPad(GPIOE, GPIOE_PMWR);
#define SET_RD palSetPad(GPIOE, GPIOE_PMRD);
#define CLR_RD palClearPad(GPIOE, GPIOE_PMRD);
static GFXINLINE void init_board(GDisplay *g) {
// As we are not using multiple displays we set g->board to NULL as we don't use it.
g->board = 0;
switch(g->controllerdisplay) {
case 0: // Set up for Display 0
/* Configure the pins to a well know state */
SET_RS;
SET_RD;
SET_WR;
CLR_CS;
break;
}
}
static GFXINLINE void post_init_board(GDisplay *g) {
(void) g;
}
static GFXINLINE void setpin_reset(GDisplay *g, gBool state) {
(void) g;
if(state) {
// reset lcd
palClearPad(GPIOE, GPIOE_LCD_RST);
} else {
palSetPad(GPIOE, GPIOE_LCD_RST);
}
}
static GFXINLINE void set_backlight(GDisplay *g, gU8 percent) {
(void) g;
// TODO: can probably pwm this
if(percent) {
// turn back light on
palSetPad(GPIOE, GPIOE_LCD_BLED);
} else {
// turn off
palClearPad(GPIOE, GPIOE_LCD_BLED);
}
}
static GFXINLINE void acquire_bus(GDisplay *g) {
(void) g;
}
static GFXINLINE void release_bus(GDisplay *g) {
(void) g;
}
/**
* @brief Short delay
*
* @param[in] dly Length of delay
*
* @notapi
*/
static GFXINLINE void ili9341_delay(gU16 dly) {
static gU16 i;
for(i = 0; i < dly; i++)
asm("nop");
}
static GFXINLINE void write_index(GDisplay *g, gU16 index) {
(void) g;
palWriteGroup(GPIOE, 0x00FF, 0, index);
CLR_RS; CLR_WR; ili9341_delay(1); SET_WR; ili9341_delay(1); SET_RS;
}
static GFXINLINE void write_data(GDisplay *g, gU16 data) {
(void) g;
palWriteGroup(GPIOE, 0x00FF, 0, data);
CLR_WR; ili9341_delay(1); SET_WR; ili9341_delay(1);
}
static GFXINLINE void setreadmode(GDisplay *g) {
(void) g;
// change pin mode to digital input
palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_INPUT);
}
static GFXINLINE void setwritemode(GDisplay *g) {
(void) g;
// change pin mode back to digital output
palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
}
static GFXINLINE gU16 read_data(GDisplay *g) {
gU16 value;
(void) g;
CLR_RD;
value = palReadPort(GPIOE);
value = palReadPort(GPIOE);
SET_RD;
return value;
}
#endif /* _GDISP_LLD_BOARD_H */