ugfx/boards/base/STM32F746-Discovery/board_STM32LTDC.h

484 lines
19 KiB
C
Raw Normal View History

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
2015-07-09 01:12:16 +00:00
#include "stm32f746g_discovery_sdram.h"
#ifndef GFX_LTDC_USE_DIRECTIO
#define GFX_LTDC_USE_DIRECTIO TRUE
#endif
#ifndef GFX_LTDC_TIMING_SET
/* Options are:
* 0 - don't initialise the display VCO and LTDC clocks - something else will do it
* 1 - uGFX preferred timings (default)
* 2 - Alternate timings
*/
#define GFX_LTDC_TIMING_SET 1
#endif
#if GFX_USE_OS_CHIBIOS && !GFX_USE_DIRECTIO
#include "hal.h"
#include "ch.h"
#else
#include "stm32f7xx_hal_rcc.h"
#include "stm32f7xx_hal_gpio.h"
#endif
#include <string.h>
#if !GFX_USE_OS_CHIBIOS
#define AFRL AFR[0]
#define AFRH AFR[1]
#endif
2017-10-01 08:00:49 +00:00
#define ALLOW_2ND_LAYER TRUE
static const ltdcConfig driverCfg = {
480, 272, // Width, Height (pixels)
2015-07-08 21:55:02 +00:00
41, 10, // Horizontal, Vertical sync (pixels)
13, 2, // Horizontal, Vertical back porch (pixels)
32, 2, // Horizontal, Vertical front porch (pixels)
0, // Sync flags
0x000000, // Clear color (RGB888)
{ // Background layer config
(LLDCOLOR_TYPE *)SDRAM_DEVICE_ADDR, // Frame buffer address
480, 272, // Width, Height (pixels)
480 * LTDC_PIXELBYTES, // Line pitch (bytes)
LTDC_PIXELFORMAT, // Pixel format
0, 0, // Start pixel position (x, y)
480, 272, // Size of virtual layer (cx, cy)
2017-10-01 08:00:49 +00:00
0x00000000, // Default color (ARGB8888)
0x000000, // Color key (RGB888)
LTDC_BLEND_FIX1_FIX2, // Blending factors
0, // Palette (RGB888, can be NULL)
0, // Palette length
0xFF, // Constant alpha factor
LTDC_LEF_ENABLE // Layer configuration flags
},
2015-07-08 21:55:02 +00:00
2017-10-01 08:00:49 +00:00
#if ALLOW_2ND_LAYER
{ // Foreground layer config (if turned on)
(LLDCOLOR_TYPE *)(SDRAM_DEVICE_ADDR+(480 * 272 * LTDC_PIXELBYTES)), // Frame buffer address
480, 272, // Width, Height (pixels)
480 * LTDC_PIXELBYTES, // Line pitch (bytes)
LTDC_PIXELFORMAT, // Pixel format
0, 0, // Start pixel position (x, y)
480, 272, // Size of virtual layer (cx, cy)
0x00000000, // Default color (ARGB8888)
0x000000, // Color key (RGB888)
LTDC_BLEND_MOD1_MOD2, // Blending factors
0, // Palette (RGB888, can be NULL)
0, // Palette length
0xFF, // Constant alpha factor
LTDC_LEF_ENABLE // Layer configuration flags
}
#else
LTDC_UNUSED_LAYER_CONFIG
#endif
};
static void configureLcdPins(void) {
#if GFX_USE_OS_CHIBIOS && !GFX_LTDC_USE_DIRECTIO
palSetPadMode(GPIOI, GPIOI_LCD_R0, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PI15: LCD_R0
palSetPadMode(GPIOJ, GPIOJ_LCD_R1, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ0 : LCD_R1
palSetPadMode(GPIOJ, GPIOJ_LCD_R2, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ1 : LCD_R2
palSetPadMode(GPIOJ, GPIOJ_LCD_R3, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ2 : LCD_R3
palSetPadMode(GPIOJ, GPIOJ_LCD_R4, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ3 : LCD_R4
palSetPadMode(GPIOJ, GPIOJ_LCD_R5, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ4 : LCD_R5
palSetPadMode(GPIOJ, GPIOJ_LCD_R6, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ5 : LCD_R6
palSetPadMode(GPIOJ, GPIOJ_LCD_R7, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ6 : LCD_R7
palSetPadMode(GPIOJ, GPIOJ_LCD_G0, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ7 : LCD_G0
palSetPadMode(GPIOJ, GPIOJ_LCD_G1, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ8 : LCD_G1
palSetPadMode(GPIOJ, GPIOJ_LCD_G2, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ9 : LCD_G2
palSetPadMode(GPIOJ, GPIOJ_LCD_G3, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ10: LCD_G3
palSetPadMode(GPIOJ, GPIOJ_LCD_G4, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ11: LCD_G4
palSetPadMode(GPIOK, GPIOK_LCD_G5, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PK0 : LCD_G5
palSetPadMode(GPIOK, GPIOK_LCD_G6, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PK1 : LCD_G6
palSetPadMode(GPIOK, GPIOK_LCD_G7, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PK2 : LCD_G7
palSetPadMode(GPIOE, GPIOE_LCD_B0, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PE4 : LCD_B0
palSetPadMode(GPIOJ, GPIOJ_LCD_B1, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ13: LCD_B1
palSetPadMode(GPIOJ, GPIOJ_LCD_B2, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ14: LCD_B2
palSetPadMode(GPIOJ, GPIOJ_LCD_B3, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PJ15: LCD_B3
palSetPadMode(GPIOG, GPIOG_LCD_B4, PAL_MODE_ALTERNATE(9) | PAL_STM32_OSPEED_HIGHEST); // PG12: LCD_B4
palSetPadMode(GPIOK, GPIOK_LCD_B5, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PK4 : LCD_B5
palSetPadMode(GPIOK, GPIOK_LCD_B6, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PK5 : LCD_B6
palSetPadMode(GPIOK, GPIOK_LCD_B7, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PK6 : LCD_B7
palSetPadMode(GPIOK, GPIOK_LCD_DE, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PK7 : LCD_DE
palSetPadMode(GPIOI, GPIOI_LCD_VSYNC, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PI9 : LCD_VSYNC
palSetPadMode(GPIOI, GPIOI_LCD_HSYNC, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PI10: LCD_HSYNC
palSetPadMode(GPIOI, GPIOI_LCD_INT, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PI13: LCD_INT
palSetPadMode(GPIOI, GPIOI_LCD_CLK, PAL_MODE_ALTERNATE(14) | PAL_STM32_OSPEED_HIGHEST); // PI14: LCD_CLK
palSetPadMode(GPIOI, GPIOI_LCD_DISP, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); // PI12: LCD_DISP_PIN
palSetPadMode(GPIOK, GPIOK_LCD_BL_CTRL, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); // PK3 : LCD_BL_CTRL
#else
2017-10-01 08:00:49 +00:00
//-------------------------------------------
// Initialise port PE
2017-10-01 08:00:49 +00:00
RCC->AHB1ENR |= RCC_AHB1ENR_GPIOEEN;
GPIOE->MODER |= (
GPIO_MODER_MODER4_1 // PE4: LCD_B0 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
);
GPIOE->MODER &=~ (
GPIO_MODER_MODER4_0
);
GPIOE->OTYPER &=~ (
GPIO_OTYPER_OT_4
);
GPIOE->OSPEEDR |= (
GPIO_OSPEEDER_OSPEEDR4_0 | GPIO_OSPEEDER_OSPEEDR4_1
);
GPIOE->PUPDR &=~ (
GPIO_PUPDR_PUPDR4_0 | GPIO_PUPDR_PUPDR4_1
);
GPIOE->AFRL |= (
(14U << 4*4)
);
//-------------------------------------------
// Initialise port PG
2017-10-01 08:00:49 +00:00
RCC->AHB1ENR |= RCC_AHB1ENR_GPIOGEN;
GPIOG->MODER |= (
GPIO_MODER_MODER12_1 // PG12: LCD_B4 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(9)
);
GPIOG->MODER &=~ (
GPIO_MODER_MODER12_0
);
GPIOG->OTYPER &=~ (
GPIO_OTYPER_OT_12
);
GPIOG->OSPEEDR |= (
GPIO_OSPEEDER_OSPEEDR12_0 | GPIO_OSPEEDER_OSPEEDR12_1
);
GPIOG->PUPDR &=~ (
GPIO_PUPDR_PUPDR12_0 | GPIO_PUPDR_PUPDR12_1
);
GPIOG->AFRH |= (
( 9U << 4*(12-8))
);
2017-10-01 08:00:49 +00:00
//-------------------------------------------
// Initialise port PI
2017-10-01 08:00:49 +00:00
RCC->AHB1ENR |= RCC_AHB1ENR_GPIOIEN;
GPIOI->MODER |= (
GPIO_MODER_MODER9_1 // PI9: LCD_VSYNC - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER10_1 // PI10: LCD_HSYNC - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER12_0 // PI12: LCD_DISP_PIN - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_OUTPUT_PUSHPULL
| GPIO_MODER_MODER13_1 // PI13: LCD_INT - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER14_1 // PI14: LCD_CLK - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER15_1 // PI15: LCD_R0 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
);
GPIOI->MODER &=~ (
GPIO_MODER_MODER9_0
| GPIO_MODER_MODER10_0
| GPIO_MODER_MODER12_1
| GPIO_MODER_MODER13_0
| GPIO_MODER_MODER14_0
| GPIO_MODER_MODER15_0
);
GPIOI->OTYPER &=~ (
GPIO_OTYPER_OT_9
| GPIO_OTYPER_OT_10
| GPIO_OTYPER_OT_12
| GPIO_OTYPER_OT_13
| GPIO_OTYPER_OT_14
| GPIO_OTYPER_OT_15
);
GPIOI->OSPEEDR |= (
GPIO_OSPEEDER_OSPEEDR9_0 | GPIO_OSPEEDER_OSPEEDR9_1
| GPIO_OSPEEDER_OSPEEDR10_0 | GPIO_OSPEEDER_OSPEEDR10_1
| GPIO_OSPEEDER_OSPEEDR12_0 | GPIO_OSPEEDER_OSPEEDR12_1
| GPIO_OSPEEDER_OSPEEDR13_0 | GPIO_OSPEEDER_OSPEEDR13_1
| GPIO_OSPEEDER_OSPEEDR14_0 | GPIO_OSPEEDER_OSPEEDR14_1
| GPIO_OSPEEDER_OSPEEDR15_0 | GPIO_OSPEEDER_OSPEEDR15_1
);
GPIOI->PUPDR &=~ (
GPIO_PUPDR_PUPDR9_0 | GPIO_PUPDR_PUPDR9_1
| GPIO_PUPDR_PUPDR10_0 | GPIO_PUPDR_PUPDR10_1
| GPIO_PUPDR_PUPDR12_0 | GPIO_PUPDR_PUPDR12_1
| GPIO_PUPDR_PUPDR13_0 | GPIO_PUPDR_PUPDR13_1
| GPIO_PUPDR_PUPDR14_0 | GPIO_PUPDR_PUPDR14_1
| GPIO_PUPDR_PUPDR15_0 | GPIO_PUPDR_PUPDR15_1
);
GPIOI->AFRH |= (
(14U << 4*(9-8))
| (14U << 4*(10-8))
| ( 0U << 4*(12-8))
| (14U << 4*(13-8))
| (14U << 4*(14-8))
| (14U << 4*(15-8))
);
//-------------------------------------------
// Initialise port PJ
RCC->AHB1ENR |= RCC_AHB1ENR_GPIOJEN;
GPIOJ->MODER |= (
GPIO_MODER_MODER0_1 // PJ0: LCD_R1 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER1_1 // PJ1: LCD_R2 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER2_1 // PJ2: LCD_R3 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER3_1 // PJ3: LCD_R4 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER4_1 // PJ4: LCD_R5 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER5_1 // PJ5: LCD_R6 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER6_1 // PJ6: LCD_R7 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER7_1 // PJ7: LCD_G0 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER8_1 // PJ8: LCD_G1 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER9_1 // PJ9: LCD_G2 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER10_1 // PJ10: LCD_G3 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER11_1 // PJ11: LCD_G4 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER13_1 // PJ13: LCD_B1 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER14_1 // PJ14: LCD_B2 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER15_1 // PJ15: LCD_B3 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
);
GPIOJ->MODER &=~ (
GPIO_MODER_MODER0_0
| GPIO_MODER_MODER1_0
| GPIO_MODER_MODER2_0
| GPIO_MODER_MODER3_0
| GPIO_MODER_MODER4_0
| GPIO_MODER_MODER5_0
| GPIO_MODER_MODER6_0
| GPIO_MODER_MODER7_0
| GPIO_MODER_MODER8_0
| GPIO_MODER_MODER9_0
| GPIO_MODER_MODER10_0
| GPIO_MODER_MODER11_0
| GPIO_MODER_MODER13_0
| GPIO_MODER_MODER14_0
| GPIO_MODER_MODER15_0
);
GPIOJ->OTYPER &=~ (
GPIO_OTYPER_OT_0
| GPIO_OTYPER_OT_1
| GPIO_OTYPER_OT_2
| GPIO_OTYPER_OT_3
| GPIO_OTYPER_OT_4
| GPIO_OTYPER_OT_5
| GPIO_OTYPER_OT_6
| GPIO_OTYPER_OT_7
| GPIO_OTYPER_OT_8
| GPIO_OTYPER_OT_9
| GPIO_OTYPER_OT_10
| GPIO_OTYPER_OT_11
| GPIO_OTYPER_OT_13
| GPIO_OTYPER_OT_14
| GPIO_OTYPER_OT_15
);
GPIOJ->OSPEEDR |= (
GPIO_OSPEEDER_OSPEEDR0_0 | GPIO_OSPEEDER_OSPEEDR0_1
| GPIO_OSPEEDER_OSPEEDR1_0 | GPIO_OSPEEDER_OSPEEDR1_1
| GPIO_OSPEEDER_OSPEEDR2_0 | GPIO_OSPEEDER_OSPEEDR2_1
| GPIO_OSPEEDER_OSPEEDR3_0 | GPIO_OSPEEDER_OSPEEDR3_1
| GPIO_OSPEEDER_OSPEEDR4_0 | GPIO_OSPEEDER_OSPEEDR4_1
| GPIO_OSPEEDER_OSPEEDR5_0 | GPIO_OSPEEDER_OSPEEDR5_1
| GPIO_OSPEEDER_OSPEEDR6_0 | GPIO_OSPEEDER_OSPEEDR6_1
| GPIO_OSPEEDER_OSPEEDR7_0 | GPIO_OSPEEDER_OSPEEDR7_1
| GPIO_OSPEEDER_OSPEEDR8_0 | GPIO_OSPEEDER_OSPEEDR8_1
| GPIO_OSPEEDER_OSPEEDR9_0 | GPIO_OSPEEDER_OSPEEDR9_1
| GPIO_OSPEEDER_OSPEEDR10_0 | GPIO_OSPEEDER_OSPEEDR10_1
| GPIO_OSPEEDER_OSPEEDR11_0 | GPIO_OSPEEDER_OSPEEDR11_1
| GPIO_OSPEEDER_OSPEEDR13_0 | GPIO_OSPEEDER_OSPEEDR13_1
| GPIO_OSPEEDER_OSPEEDR14_0 | GPIO_OSPEEDER_OSPEEDR14_1
| GPIO_OSPEEDER_OSPEEDR15_0 | GPIO_OSPEEDER_OSPEEDR15_1
);
GPIOJ->PUPDR &=~ (
GPIO_PUPDR_PUPDR0_0 | GPIO_PUPDR_PUPDR0_1
| GPIO_PUPDR_PUPDR1_0 | GPIO_PUPDR_PUPDR1_1
| GPIO_PUPDR_PUPDR2_0 | GPIO_PUPDR_PUPDR2_1
| GPIO_PUPDR_PUPDR3_0 | GPIO_PUPDR_PUPDR3_1
| GPIO_PUPDR_PUPDR4_0 | GPIO_PUPDR_PUPDR4_1
| GPIO_PUPDR_PUPDR5_0 | GPIO_PUPDR_PUPDR5_1
| GPIO_PUPDR_PUPDR6_0 | GPIO_PUPDR_PUPDR6_1
| GPIO_PUPDR_PUPDR7_0 | GPIO_PUPDR_PUPDR7_1
| GPIO_PUPDR_PUPDR8_0 | GPIO_PUPDR_PUPDR8_1
| GPIO_PUPDR_PUPDR9_0 | GPIO_PUPDR_PUPDR9_1
| GPIO_PUPDR_PUPDR10_0 | GPIO_PUPDR_PUPDR10_1
| GPIO_PUPDR_PUPDR11_0 | GPIO_PUPDR_PUPDR11_1
| GPIO_PUPDR_PUPDR13_0 | GPIO_PUPDR_PUPDR13_1
| GPIO_PUPDR_PUPDR14_0 | GPIO_PUPDR_PUPDR14_1
| GPIO_PUPDR_PUPDR15_0 | GPIO_PUPDR_PUPDR15_1
);
GPIOJ->AFRL |= (
(14U << 4*0)
| (14U << 4*1)
| (14U << 4*2)
| (14U << 4*3)
| (14U << 4*4)
| (14U << 4*5)
| (14U << 4*6)
| (14U << 4*7)
);
GPIOJ->AFRH |= (
(14U << 4*(8-8))
| (14U << 4*(9-8))
| (14U << 4*(10-8))
| (14U << 4*(11-8))
| (14U << 4*(13-8))
| (14U << 4*(14-8))
| (14U << 4*(15-8))
);
//-------------------------------------------
// Initialise port PK
RCC->AHB1ENR |= RCC_AHB1ENR_GPIOKEN;
GPIOK->MODER |= (
GPIO_MODER_MODER0_1 // PK0: LCD_G5 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER1_1 // PK1: LCD_G6 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER2_1 // PK2: LCD_G7 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER3_0 // PK3: LCD_BL_CTRL - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_OUTPUT_PUSHPULL
| GPIO_MODER_MODER4_1 // PK4: LCD_B5 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER5_1 // PK5: LCD_B6 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER6_1 // PK6: LCD_B7 - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
| GPIO_MODER_MODER7_1 // PK7: LCD_DE - PAL_STM32_OSPEED_HIGHEST, PAL_MODE_ALTERNATE(14)
);
GPIOK->MODER &=~ (
GPIO_MODER_MODER0_0
| GPIO_MODER_MODER1_0
| GPIO_MODER_MODER2_0
| GPIO_MODER_MODER3_1
| GPIO_MODER_MODER4_0
| GPIO_MODER_MODER5_0
| GPIO_MODER_MODER6_0
| GPIO_MODER_MODER7_0
);
GPIOK->OTYPER &=~ (
GPIO_OTYPER_OT_0
| GPIO_OTYPER_OT_1
| GPIO_OTYPER_OT_2
| GPIO_OTYPER_OT_3
| GPIO_OTYPER_OT_4
| GPIO_OTYPER_OT_5
| GPIO_OTYPER_OT_6
| GPIO_OTYPER_OT_7
);
GPIOK->OSPEEDR |= (
GPIO_OSPEEDER_OSPEEDR0_0 | GPIO_OSPEEDER_OSPEEDR0_1
| GPIO_OSPEEDER_OSPEEDR1_0 | GPIO_OSPEEDER_OSPEEDR1_1
| GPIO_OSPEEDER_OSPEEDR2_0 | GPIO_OSPEEDER_OSPEEDR2_1
| GPIO_OSPEEDER_OSPEEDR3_0 | GPIO_OSPEEDER_OSPEEDR3_1
| GPIO_OSPEEDER_OSPEEDR4_0 | GPIO_OSPEEDER_OSPEEDR4_1
| GPIO_OSPEEDER_OSPEEDR5_0 | GPIO_OSPEEDER_OSPEEDR5_1
| GPIO_OSPEEDER_OSPEEDR6_0 | GPIO_OSPEEDER_OSPEEDR6_1
| GPIO_OSPEEDER_OSPEEDR7_0 | GPIO_OSPEEDER_OSPEEDR7_1
);
GPIOK->PUPDR &=~ (
GPIO_PUPDR_PUPDR0_0 | GPIO_PUPDR_PUPDR0_1
| GPIO_PUPDR_PUPDR1_0 | GPIO_PUPDR_PUPDR1_1
| GPIO_PUPDR_PUPDR2_0 | GPIO_PUPDR_PUPDR2_1
| GPIO_PUPDR_PUPDR3_0 | GPIO_PUPDR_PUPDR3_1
| GPIO_PUPDR_PUPDR4_0 | GPIO_PUPDR_PUPDR4_1
| GPIO_PUPDR_PUPDR5_0 | GPIO_PUPDR_PUPDR5_1
| GPIO_PUPDR_PUPDR6_0 | GPIO_PUPDR_PUPDR6_1
| GPIO_PUPDR_PUPDR7_0 | GPIO_PUPDR_PUPDR7_1
);
GPIOK->AFRL |= (
(14U << 4*0)
| (14U << 4*1)
| (14U << 4*2)
| ( 0U << 4*3)
| (14U << 4*4)
| (14U << 4*5)
| (14U << 4*6)
| (14U << 4*7)
);
#endif
}
static GFXINLINE void init_board(GDisplay *g) {
2017-10-01 08:00:49 +00:00
(void) g;
2017-10-01 08:00:49 +00:00
// Set pin directions
configureLcdPins();
// Enable the display and turn on the backlight
#if GFX_USE_OS_CHIBIOS && !GFX_LTDC_USE_DIRECTIO
palSetPad(GPIOI, GPIOI_LCD_DISP);
palSetPad(GPIOK, GPIOK_LCD_BL_CTRL);
#else
GPIOI->ODR |= (1 << 12); // PowerOn
GPIOK->ODR |= (1 << 3); // Backlight on
#endif
#if GFX_LTDC_TIMING_SET != 0
#define STM32_SAISRC_NOCLOCK (0 << 23) /**< No clock. */
#define STM32_SAISRC_PLL (1 << 23) /**< SAI_CKIN is PLL. */
#define STM32_SAIR_DIV2 (0 << 16) /**< R divided by 2. */
#define STM32_SAIR_DIV4 (1 << 16) /**< R divided by 4. */
#define STM32_SAIR_DIV8 (2 << 16) /**< R divided by 8. */
#define STM32_SAIR_DIV16 (3 << 16) /**< R divided by 16. */
// Some operating systems get these wrong eg ChibiOS - define our own values
#undef STM32_PLLSAIN_VALUE
#undef STM32_PLLSAIQ_VALUE
#undef STM32_PLLSAIP_VALUE
#undef STM32_PLLSAIR_VALUE
/* Display timing */
// RK043FN48H LCD clock configuration
// PLLSAI_VCO Input = HSE_VALUE/PLL_M = 1 Mhz
// PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN = 192 Mhz
// PLLLCDCLK = PLLSAI_VCO Output/PLLSAIR = 192/5 = 38.4 Mhz
// LTDC clock frequency = PLLLCDCLK / STM32_PLLSAIR_POST = 38.4/4 = 9.6Mhz
#if GFX_LTDC_TIMING_SET == 1
#define RK043FN48H_FREQUENCY_DIVIDER 5
#define STM32_PLLSAIN_VALUE 192
#define STM32_PLLSAIQ_VALUE 4
#define STM32_PLLSAIP_VALUE 4
#define STM32_PLLSAIR_VALUE RK043FN48H_FREQUENCY_DIVIDER
#define STM32_PLLSAIR_POST STM32_SAIR_DIV4
#elif GFX_LTDC_TIMING_SET == 2
#define RK043FN48H_FREQUENCY_DIVIDER 4
#define STM32_PLLSAIN_VALUE 192
#define STM32_PLLSAIQ_VALUE 4
#define STM32_PLLSAIP_VALUE 4
#define STM32_PLLSAIR_VALUE RK043FN48H_FREQUENCY_DIVIDER
#define STM32_PLLSAIR_POST STM32_SAIR_DIV4
#else
#error "LTDC: - Unknown timing set for the STM32F746-Discovery board"
#endif
RCC->CR &= ~RCC_CR_PLLSAION;
RCC->PLLSAICFGR = ((STM32_PLLSAIP_VALUE/2-1)<<16) | (STM32_PLLSAIN_VALUE << 6) | (STM32_PLLSAIR_VALUE << 28) | (STM32_PLLSAIQ_VALUE << 24);
RCC->DCKCFGR1 = (RCC->DCKCFGR1 & ~RCC_DCKCFGR1_PLLSAIDIVR) | STM32_PLLSAIR_POST;
RCC->CR |= RCC_CR_PLLSAION;
#endif
// Initialise the SDRAM
BSP_SDRAM_Init();
}
static GFXINLINE void post_init_board(GDisplay* g) {
(void) g;
}
static GFXINLINE void set_backlight(GDisplay* g, uint8_t percent) {
(void) g;
// ST was stupid enought not to hook this up to a pin that
// is able to act as PWM output...
#if GFX_USE_OS_CHIBIOS && !GFX_LTDC_USE_DIRECTIO
if (percent <= 0) {
palClearPad(GPIOK, GPIOK_LCD_BL_CTRL); // Backlight off
} else {
palSetPad(GPIOK, GPIOK_LCD_BL_CTRL); // Backlight on
}
#else
if (percent <= 0) {
GPIOK->ODR &=~ (1 << 3); // Backlight off
} else {
GPIOK->ODR |= (1 << 3); // Backlight on
}
#endif
}
#endif /* _GDISP_LLD_BOARD_H */