ugfx/boards/addons/gdisp/board_ILI9481_firebullstm32f103.h

110 lines
2.7 KiB
C
Raw Normal View History

2013-10-18 07:29:27 +00:00
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
2018-10-01 15:32:39 +00:00
* http://ugfx.io/license.html
2013-10-18 07:29:27 +00:00
*/
/**
* @file boards/addons/gdisp/board_ILI9481_firebullstm32f103.h
* @brief GDISP Graphics Driver subsystem low level driver source for the ILI9481 and compatible HVGA display
*
* @note This file contains a mix of hardware specific and operating system specific
* code. You will need to change it for your CPU and/or operating system.
2013-10-18 07:29:27 +00:00
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
// For a multiple display configuration we would put all this in a structure and then
2013-10-21 07:11:07 +00:00
// set g->board to that structure.
2013-10-18 07:29:27 +00:00
#define SET_CS palSetPad(GPIOD, 12);
#define CLR_CS palClearPad(GPIOD, 12);
#define SET_RS palSetPad(GPIOD, 13);
#define CLR_RS palClearPad(GPIOD, 13);
#define SET_WR palSetPad(GPIOD, 14);
#define CLR_WR palClearPad(GPIOD, 14);
#define SET_RD palSetPad(GPIOD, 15);
#define CLR_RD palClearPad(GPIOD, 15);
static GFXINLINE void init_board(GDisplay *g) {
2013-10-18 07:29:27 +00:00
// As we are not using multiple displays we set g->board to NULL as we don't use it.
g->board = 0;
2013-10-18 07:29:27 +00:00
switch(g->controllerdisplay) {
case 0: // Set up for Display 0
2013-10-18 07:29:27 +00:00
palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOD, 12, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOD, 13, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOD, 14, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOD, 15, PAL_MODE_OUTPUT_PUSHPULL);
// Configure the pins to a well know state
SET_RS;
SET_RD;
SET_WR;
CLR_CS;
break;
2013-10-18 07:29:27 +00:00
}
}
static GFXINLINE void post_init_board(GDisplay *g) {
2013-10-18 07:29:27 +00:00
(void) g;
}
static GFXINLINE void setpin_reset(GDisplay *g, gBool state) {
2013-10-18 07:29:27 +00:00
(void) g;
(void) state;
}
static GFXINLINE void set_backlight(GDisplay *g, gU8 percent) {
2013-10-18 07:29:27 +00:00
(void) g;
(void) percent;
}
static GFXINLINE void acquire_bus(GDisplay *g) {
2013-10-18 07:29:27 +00:00
(void) g;
}
static GFXINLINE void release_bus(GDisplay *g) {
2013-10-18 07:29:27 +00:00
(void) g;
}
static GFXINLINE void write_index(GDisplay *g, gU16 index) {
2013-10-18 07:29:27 +00:00
(void) g;
palWritePort(GPIOE, index);
CLR_RS; CLR_WR; SET_WR; SET_RS;
}
static GFXINLINE void write_data(GDisplay *g, gU16 data) {
2013-10-18 07:29:27 +00:00
(void) g;
palWritePort(GPIOE, data);
CLR_WR; SET_WR;
}
static GFXINLINE void setreadmode(GDisplay *g) {
2013-10-18 07:29:27 +00:00
(void) g;
// change pin mode to digital input
palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_INPUT);
}
static GFXINLINE void setwritemode(GDisplay *g) {
2013-10-18 07:29:27 +00:00
(void) g;
// change pin mode back to digital output
palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
}
static GFXINLINE gU16 read_data(GDisplay *g) {
gU16 value;
2013-10-18 07:29:27 +00:00
(void) g;
CLR_RD;
value = palReadPort(GPIOE);
SET_RD;
return value;
}
#endif /* _GDISP_LLD_BOARD_H */