ugfx/boards/addons/gdisp/board_SSD1306_chibios_16.1.3_stm32f4.h

94 lines
1.9 KiB
C
Raw Normal View History

#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
// Pin & SPI setup
#define SPI_DRIVER (&SPID2)
#define SPI_PORT GPIOB
#define SCK_PAD 10
#define MOSI_PAD 15
#define CS_PORT GPIOB
#define RESET_PORT GPIOB
#define DC_PORT GPIOB
#define CS_PAD 3 // 0 = chip selected
#define RESET_PAD 4 // 0 = reset
#define DC_PAD 5 // control = 0, data = 1
static SPIConfig spi_cfg = {
NULL,
CS_PORT,
CS_PAD,
SPI_CR1_BR_1
};
static GFXINLINE void init_board(GDisplay* g)
{
(void)g;
g->board = 0;
// Set pin modes
palSetPadMode(SPI_PORT, SCK_PAD, PAL_MODE_ALTERNATE(5) | PAL_STM32_OSPEED_HIGHEST);
palSetPadMode(SPI_PORT, MOSI_PAD, PAL_MODE_ALTERNATE(5) | PAL_STM32_OSPEED_HIGHEST);
palSetPadMode(RESET_PORT, RESET_PAD, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
palSetPadMode(CS_PORT, CS_PAD, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
palSetPadMode(DC_PORT, DC_PAD, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
// Apply default states
palSetPad(CS_PORT, CS_PAD);
palSetPad(RESET_PORT, RESET_PAD);
palClearPad(DC_PORT, DC_PAD);
// Start the SPI driver
spiStart(SPI_DRIVER, &spi_cfg);
}
static GFXINLINE void post_init_board(GDisplay* g)
{
(void)g;
}
static GFXINLINE void setpin_reset(GDisplay *g, gBool state)
{
(void)g;
palWritePad(RESET_PORT, RESET_PAD, !state);
}
static GFXINLINE void acquire_bus(GDisplay* g)
{
(void)g;
spiAcquireBus(SPI_DRIVER);
spiSelect(SPI_DRIVER);
}
static GFXINLINE void release_bus(GDisplay* g)
{
(void)g;
spiUnselect(SPI_DRIVER);
spiReleaseBus(SPI_DRIVER);
}
static GFXINLINE void write_cmd(GDisplay* g, gU8 cmd)
{
(void)g;
static gU8 buf;
palClearPad(DC_PORT, DC_PAD);
buf = cmd;
spiSend(SPI_DRIVER, 1, &buf);
}
static GFXINLINE void write_data(GDisplay* g, gU8* data, gU16 length)
{
(void)g;
palSetPad(DC_PORT, DC_PAD);
spiSend(SPI_DRIVER, length, data);
}
#endif /* _GDISP_LLD_BOARD_H */