674bcb52d2
GPIO interface-related fixes
...
Adding acquire_bus() and release_bus()
so that orientation setting commands are
not ignored.
2013-03-30 16:08:47 +05:30
f938c72044
STMPE811 tweaks
2013-03-29 20:19:35 +01:00
6ed641c91d
STMPE811 cleanup & readme
2013-03-29 19:26:56 +01:00
4440c2c887
STMPE811 getpin_pressed() -> getpin_irq()
2013-03-29 18:17:24 +01:00
2510f3e75b
board file fix
2013-03-29 18:14:35 +01:00
d6b75429b2
STMPE811 - initial
2013-03-29 18:10:22 +01:00
2f7b6fc80b
STMPE811: attempt to use FIFO
...
Very early version of using FIFO threshold interrupt.
2013-03-29 01:15:07 +01:00
dd1eb6c63d
STMPE811: working reading, writing and interrupt
...
- Slightly changed rading and writing routines.
- Added delay after reset of STMPE811 in initialization code.
- STMPE811 "interrupt service routine"
- Comments, formatting etc.
- Another commit with unfinished driver.
2013-03-25 01:10:32 +01:00
15d76cb5fc
SSD1289 SSD2119: fixed warning messages
...
Few type castings in order to suppress warnings (-Wsign-compare):
"comparison between signed and unsigned integer expressions"
"signed and unsigned type in conditional expression"
2013-03-20 22:15:18 +01:00
5062603188
STMPE811: reading registers over I2C
...
- Reading works.
- Some other cleanups.
Driver is not usable yet.
2013-03-20 02:42:43 +01:00
38e55c3921
STMPE811 - not tested yet
2013-03-19 22:59:04 +01:00
88765396bf
SSD1963 rework by user: fred
2013-03-14 19:46:40 +01:00
426a12de6b
doxygen fixes
2013-03-10 20:17:24 +01:00
f552098116
embest DMSTF4BB board fix - removed FSMC suffix because only FSMC exists
2013-03-08 09:20:51 +01:00
e9cb6aa17a
small cleanup
2013-03-08 06:36:33 +01:00
4a056ae25f
STMPE811: comment fix
2013-03-08 02:11:27 +01:00
27290b5f85
STMPE811: added header with registers addresses
...
Also changed filename of board file from *_embest_lcd.h to
*_embest_dmstf4bb.h.
2013-03-08 02:02:18 +01:00
0400ba0e2d
added basic STMPE811 skeleton
2013-03-08 00:56:59 +01:00
ce5f3b3d70
Nokia6610GE8 driver updates
...
Fix screen size to ignore hidden pixels.
Add orientation support.
Fix bit blitting boundary conditions.
Add power modes support.
This driver is now fully implemented.
2013-03-08 00:53:34 +10:00
4e67b54e4d
Fix Olimex SAM7EX256 button definitions
2013-03-08 00:50:39 +10:00
40534cbc79
Correction of copyright message
2013-03-08 00:49:52 +10:00
e315480c71
updated copyright - 2013
2013-03-06 23:11:01 +01:00
b91e619573
__inline becomes inline because most compilers dont like the prefix
2013-03-04 23:50:21 +01:00
2d7c95d20a
Add PWM backlight control to Nokia6610GE8
...
Add PWM backlight control to Nokia6610GE8 for the Olimex SAM7EX256
board.
2013-03-04 19:56:46 +10:00
b51342d41c
ILI9320 update
2013-03-03 13:46:14 +01:00
100d686f94
TDISP update
2013-03-02 22:13:44 +01:00
b1f9054998
Merge branch 'SSD2119'
2013-03-02 13:33:57 +01:00
7ba69f556b
SSD2119: readme fix
2013-03-02 13:33:19 +01:00
3863ef8374
Merge branch 'SSD2119'
2013-03-02 13:31:51 +01:00
57f1016573
SSD2119: GPIO board file removal
...
Removed GPIO board file. It did not work (it wasn't finished nor started
to be honest). It is always possible to make it, general idea is exactly
the same as in SSD1289 driver.
2013-03-02 00:32:51 +01:00
2bc2dc6f68
SSD2119: updated scroll function name
...
Changed to new scheme: gdisp_lld_*.
2013-03-01 22:54:52 +01:00
6ee8b005ae
GAUDIN implemented with GADC driver
2013-03-01 09:04:52 +10:00
e5543face9
SSD2119: orientation control
...
All angles supported: 0, 90, 180, 270.
2013-02-28 00:31:46 +01:00
bbdd57d9c1
SSD2119: power control
...
All modes are working: powerOff, powerOn, powerSleep and powerDeepSleep.
2013-02-25 00:35:13 +01:00
51b292d3b9
SSD2119: PWM period change
...
100 kHz PWM period made small induction coil onboard LCD to moan if the
pulse width was smaller than 100%. I changed it to 1MHz.
2013-02-22 00:54:11 +01:00
cec4628a97
SSD2119: backlight control
...
- Backlight uses PWM on TIM4 CH2.
- Updated readme.
- Updated gdisp_lld.c: moved from lld_gdisp_* to gdisp_lld_* functions
names format.
- One forgotten GDISP_LLD() macro removal.
- General code cleanup (make diff with -w parameter ;))
2013-02-21 22:46:47 +01:00
d9a92aa30c
Merge branch 'master' into SSD2119
2013-02-19 23:30:33 +01:00
9bec5967b2
GADC implementation with demo program
...
Also includes driver for AT91SAM7 cpu
2013-02-18 17:33:35 +10:00
2ed57aea77
TDISP to take ROWS and COLUMNS from board file
...
TDISP to take ROWS and COLUMNS from board file
2013-02-18 17:31:49 +10:00
9329b22086
Fix compile error in GDISP
...
Fix compile error with wrongly named include file
Revert lld_gdisp naming convention to gdisp_lld to fix problem and be
consitant with all other low level drivers.
2013-02-18 17:29:08 +10:00
08f2305aeb
TDISP merge - NOT TESTED!!!
2013-02-18 08:18:09 +01:00
dd79671730
SSD2119: GDISP_LLD() macro removal
2013-02-13 22:02:13 +01:00
e8ce8a36fb
Merge branch 'master' into SSD2119
2013-02-13 21:38:31 +01:00
60b16e8685
more GDISP_LLD() cleanup
2013-02-11 10:26:34 +01:00
1bfc5a9f85
removed GDISP_LLD() macro - fix
2013-02-11 09:25:45 +01:00
885b3d53b3
removed GDISP_LLD() macro
2013-02-11 09:25:26 +01:00
c42602375b
SSD2119: code & comments cleanup
2013-02-07 16:01:07 +01:00
2de39e3302
SSD2119: reorganization of files
...
- Added FSMC board file (_fsmc suffix) - working.
- Added GPIO board file (no suffix) - not working.
- Removed unneeded files.
2013-02-07 01:44:00 +01:00
e097426338
SSD2119: first working version of driver
...
It is a mix of barely changed few drivers already present in ChibiOS/GFX
project. No other routines than initialization ones were changed.
Properly displays "basics" demo.
Main features and changes:
- Based on SSD1289 and SSD1121 in FSMC mode.
- Uses FSMC module. Maybe oneday I will make GPIO version.
- LCD backlight PWM input is tied high (no timer yet).
- Added ssd2119.h with SSD2119 registers' addresses.
- Updated set_cursor and set_viewport functions. Not thoroughly tested,
however.
- Rewritten GDISP_LLD(init)(void) function.
2013-02-05 23:39:48 +01:00
cb81a0f3fc
SSD2119: created board file
...
Created board support file for Embest DM-STF4BB board with DM-LCD35RT
LCD module. You simply plug STM32F4DISCOVERY into it.
2013-01-26 22:57:39 +01:00
Abhishek Kumar
Joel Bodenmann
Mateusz Tomaszkiewicz
Andrew Hannam