ugfx/drivers/gdisp/SSD1306
2023-07-12 12:02:40 +10:00
..
board_SSD1306_template.h For all source files update integer types to the new gI8 etc type names 2018-11-03 10:51:23 +10:00
driver.mk Rename all driver makefiles to driver.mk 2014-08-22 18:20:02 +10:00
gdisp_lld_config.h Fixing line endings 2021-10-20 22:17:27 +10:00
gdisp_lld_SSD1306.c For all source files update integer types to the new gI8 etc type names 2018-11-03 10:51:23 +10:00
readme.txt Use pure ascii encoding to prevent character encoding issues 2023-07-12 12:02:40 +10:00
SSD1306.h Fixing line endings 2021-10-20 22:17:27 +10:00

Description:

Driver for OLED with 4-wire serial interface and I2C/SPI interface

Know restictions:
- Driver works only with SSD1306 hooked up over I2C or SPI (include corresponding header)
- Driver is written for 128x64 pixel displays (128x32 are only partly supported and need small further work)
- after using uGFX subsystem gdisp_lld_display() has to be called "by hand" to push framebuffer to display

To use this driver:

1. 	Add in your gfxconf.h:
	a) #define GFX_USE_GDISP	GFXON

	b) Any optional high level driver defines (see gdisp.h) eg: GDISP_NEED_MULTITHREAD

	c) The following are optional - define them if you are not using the defaults below:
		#define GDISP_SCREEN_WIDTH		128
		#define GDISP_SCREEN_HEIGHT		64

2. 	If you are not using a known board then create a gdisp_lld_board.h file according to
	given example files (or just stick with them) and ensure it is on your include path.

3. 	To your makefile add the following lines:
	include $(GFXLIB)/drivers/gdisp/SSD1306/gdisp_lld.mk

4. 	Call gdisp_lld_display() every time you want to update display content