ugfx/boards/base/Olimex-SAM7EX256-GE8/ginput_lld_toggle_board.h

41 lines
1.5 KiB
C
Raw Permalink Normal View History

/*
2013-06-15 11:37:22 +00:00
* This file is subject to the terms of the GFX License. If a copy of
2013-05-03 14:36:17 +00:00
* the license was not distributed with this file, you can obtain one at:
*
2018-10-01 15:32:39 +00:00
* http://ugfx.io/license.html
2013-05-03 14:36:17 +00:00
*/
/**
* @file boards/base/Olimex-SAM7EX256-GE8/ginput_lld_toggle_board.h
* @brief GINPUT Toggle low level driver source for the ChibiOS PAL hardware on the Olimex SAM7EX256 board.
*/
#ifndef _GDISP_LLD_TOGGLE_BOARD_H
#define _GDISP_LLD_TOGGLE_BOARD_H
#define GINPUT_TOGGLE_NUM_PORTS 7 // The total number of toggle inputs
#define GINPUT_TOGGLE_CONFIG_ENTRIES 2 // The total number of GToggleConfig entries
#define GINPUT_TOGGLE_SW1 0 // Switch 1
#define GINPUT_TOGGLE_SW2 1 // Switch 2
#define GINPUT_TOGGLE_LEFT 2 // Joystick Left
#define GINPUT_TOGGLE_DOWN 3 // Joystick Down
#define GINPUT_TOGGLE_UP 4 // Joystick Up
#define GINPUT_TOGGLE_RIGHT 5 // Joystick Right
#define GINPUT_TOGGLE_CENTER 6 // Joystick Center
#define GINPUT_TOGGLE_DECLARE_STRUCTURE() \
const GToggleConfig GInputToggleConfigTable[GINPUT_TOGGLE_CONFIG_ENTRIES] = { \
{AT91C_BASE_PIOB, /* Switch 1 and Switch 2 */ \
PIOB_SW1_MASK|PIOB_SW2_MASK, \
PIOB_SW1_MASK|PIOB_SW2_MASK, \
PAL_MODE_INPUT}, \
{AT91C_BASE_PIOA, /* B1..4 Joystick */ \
PIOA_B1_MASK|PIOA_B2_MASK|PIOA_B3_MASK|PIOA_B4_MASK|PIOA_B5_MASK, \
PIOA_B1_MASK|PIOA_B2_MASK|PIOA_B3_MASK|PIOA_B4_MASK|PIOA_B5_MASK, \
PAL_MODE_INPUT}, \
}
#endif /* _GDISP_LLD_TOGGLE_BOARD_H */